Bolts & Beer

Пікірлер

@clocloflowers4911 22 күн бұрын

💤💤💤💤💤💤💤

@cunnings309 3 ай бұрын

Come on guys, this welder did a good job; he deserves his beer!

@FACEBOOKS-WBDS 3 ай бұрын

You should have done yourself a favor and made the back wheels swivel.

@timrichards4236 3 ай бұрын

how many of us have a work shop like that

@吳斯超 4 ай бұрын

有割跟沒割差不多！簡直就是在耍寶

@charlesdjones1 5 ай бұрын

I did the same with a Honda GCV160cc model. I took the bottom blade off and kept only the flat skinny top blade, lifted the mower up to 8 inches and rewelded all the tire mounts. I took everything off that added extra weight, and flipped the deck around so the large opening faces forward (deck is from a cheap Toro). It works great, I cut through 4-6ft weeds and bahia grass with it today and it just chews it up and spits it out like cows chewing cud. I'm changing the front to a single center tire as I've found the side mounted tires keep getting caught up in the tall stuff. Beats buying a $3500 DR or B. Goat 🐐.

@kerrywonser-s5q 5 ай бұрын

Do you have any plans for this?

@WarrenFloyd-xr2js 6 ай бұрын

I built one of these 30+ yearß ago, using only an oxy acetylene torch and hand tools,and an old Lincoln dstick welder,it worked well, im 61 now

@Juris-Jerzy 6 ай бұрын

Друже, наточи свердла, та зменш кількість обертів на сверлильному станку😉

@squidben5780 6 ай бұрын

To be fair I saw at the end that the blade was cutting a bit of the weeds on the front by maybe an inch between the fourks. I maybe would have put the blade forward by another 2 inch to really cut more what is entering the front teeth then having to push forward against those branches and week. Just a suggestion.

@johnmoreno9385 6 ай бұрын

NOT a DIY project. Who has all this equipment in their garage? 99.99% don't so this is NOT a DIY project

@c2004398x 6 ай бұрын

ITS WHISPER QUIET

@sridharkota4841 6 ай бұрын

12 mins i'll never get back.

@davidgreen4288 6 ай бұрын

Should of fitted a clearing saw blade😂

@kirkboivin4357 6 ай бұрын

You obviously have a great deal of extra time 😂

@tonybrandt8850 6 ай бұрын

In many videos, I can see the weld penetrate because the video is from the back side. There is a brief orange glow in the shape of a small dot, which I think may indicate a solid weld.

@hellhound1389 6 ай бұрын

Being from America and spending my youth working at a lawnmower repair shop I can truly say the machines you have down there are wimpy compared to ours. The small mowers we have are more like the brush mower you made and we go up in size

@donhardy9248 7 ай бұрын

Your mower blade has a hole in the center, through which the shaft passes. If the blade hits something heavy, the shaft gets bent. The key to a brush hog's ability to cut large trunks is 1) much slower RPM's, 2) much heavier blades, and 3) the blades' ability to swivel because they are not attached to directly to the shaft -- they are attached to the stump guard disk, which enables the blades to swing when they hit heavy trunks, without damaging the mower.

@stevestanfill7765 7 ай бұрын

Is there a list of purchased parts. I'm looking for a run/stop control.

@digdilem 7 ай бұрын

Nice. Now add some motors and electronics and make it remote control.

@tabeight5786 7 ай бұрын

DIY LOLOLO, c'mon no one has this machinery at home. Do not waste our time and change your title. Okay, we are excited for you, having a small machine shop in your garage. Any one who is interested in modifying your lawn mower there are many videos on youtube and you don't need a machine shop to do it.

@mackpowell-vy1qj 7 ай бұрын

The equipment you have is impressive, way more than ANY , EVEN OBSESSED handyman would have . Also the mower turned out nicely, looks like the uss enterprise. But nice job

@RWFRMoto 8 ай бұрын

Very cool. Needs " go faster flame decals" though !

@bobbg9041 8 ай бұрын

I had a simular idea but it would be a large table saw blade so it can take down 3" dia trees and drop down or up. You can't set the height on the but you can use a mower blade, string trimmer or chain saw disk or table saw blade This also doesn't have a discharge.

@jurgenpuley5738 8 ай бұрын

🎉

@dkeith45 8 ай бұрын

Interestingly, some years ago, there was a factory made mower that is VERY similar. CrissCut.

@paulj9587 8 ай бұрын

$20 mower + weeks of labor + $10k in tools and supplies and you too could make the equivalent of a brush cutter worth $100.

@jarkkovanska6681 7 ай бұрын

😂😂

@leo959 9 ай бұрын

I love it. I would like to see it cut taller grass though.

@randallblake1213 10 ай бұрын

Impressive metal working shop! 😮

@paulshamblin6260 11 ай бұрын

Why are the rear wheels so close together?

@coryboyd7958 Жыл бұрын

So, it's still a lawn mower with the front changed a bit. Not much different

@liliandasilvanoda5319 Жыл бұрын

Thanks for making this very educational video. I'm a woman (real...ovaries, uterus, etc :)), I was fascinated by your video because you are detailed and super clean and professional, you did not neglect a single detail. I have a John Deere E130, what type of winch can I put on that model? Thanks for your help.

@andreabond3501 Жыл бұрын

Impressed would that design work with a larger deck size I have two 30 Inch Scag Walkbehind mowers

@thegapman67 Жыл бұрын

Nice job. I would love to have something like that on my tractor.

@brucefleming3309 Жыл бұрын

Lightweight is good and what did I use it for it’s a lawnmower kzbin.infoUgkxTPN04aT-Qdjr_KS3ql7ng8wnU3wwsCqk also recommend Yes it is lightweight so hence not as robust as our old one. But if you take care it does the job really well.

@scottmurray2961 Жыл бұрын

Start with an older Toro GTS (THIS STANDS FOR GURANTEED TO START ) 3 speed mower. Leave the right front wheel but expose 2 inches of the deck all the way around to 10 o'clock. Reinstall the left front wheel at 9 o'clock. / I have made 20 or more of these in the last 10 years. And I nickname this the death machine. / I have had to install some mesh from a screen door On the top of the mower to keep the debris from getting down inside the top of the mower. on one of my trips driving home. The top of my mower looks like an Indian smoke signal. / But before installing the screen on top of the mower, I accidentally melted one of my coil wires.

@AerialLensVideo Жыл бұрын

I am fixing to utilize your great design -- THANKS SO MUCH! Before I jump into the project, Have you discovered anything at all that you would recommend changes on? Whether dimensional or shape-wise, or even horsepower. This is so cool!

@scottmurray2961 Жыл бұрын

Start with the Toro GTS 3 speed mower. Leave the right front wheel expose 2 inches of the blade All the way back around to 10 o'clock. Reinstall the left front wheel at 9 o'clock. / You might have to install about a one foot by one foot Piece of screen mesh on top of the mower to keep debris from getting down inside of the top of the motor. / I have nicknamed this the death machine. / It is the beast , watch your feet

@AerialLensVideo Жыл бұрын

@@scottmurray2961 Great - thanks! Looking at a photo, I'm wondering the reason for putting the left front wheel back in the 9 o'clock position (from rear point of view / front of mower 12 o'clock). Does that have something to do with throwing out the debris?