The new Archicad subscription system will be the death of the software. More expensive than revit and is basically unobtainable to small firm designers. very bad move by graphisoft. It is only going to lead people into using bootleg versions and graphisoft competitors. Go for Volume expansion, get everyone on the platform at a lower price and dominate the market share.
@jaimealves78784 күн бұрын
Great reference, but I didn't understand the need to dub it and translate it into English?
@MikeMontgomery15 күн бұрын
How do we add an editable 3D hotspot to our Param-O object so I can adjust the model in the 3D window? Does that have to be done with GDL after the inital object is created?
@zj8710235 күн бұрын
The one responsible for making the menu and icons monochrome should be fired immediately. Those who approved it too.
@user-dk2xz9yj2w5 күн бұрын
Vote for this wish in the Archicad Community: Building Materials With Intersection Priority Defined By Element
@imasamalia66966 күн бұрын
Cara menyembunyikan reference line gmn ya?
@brighttooth35926 күн бұрын
Thank you
@huipingfoo95658 күн бұрын
1 - Introduction, Interface - ARCHICAD Training Series Vol. 1
@arielh785014 күн бұрын
Hey Nando!
@mihailtilev543116 күн бұрын
Very good video! Very much help!
@alejandragonzalezsaez125018 күн бұрын
Espectacular simplemente asombroso 100%👌
@SIMSPOTTERS22 күн бұрын
Revit 1-Archicad 0 😢
@DK-ic5uc27 күн бұрын
필리핀에서 다국적 ArchiCAD 스튜디오를 운영하고 있습니다. 한옥의 미세함을 구현하셨다니 대단하네요.
@haraldszvidrins293228 күн бұрын
Ty so much for this quick and simple to understand tutorial.
@user-by3mr1lp4c29 күн бұрын
Здравствуйте, подскажите пожалуйста, как модели с расширением rfa открывать в скетчапе
@ZeeDeveel19Ай бұрын
This is AMAZING! Can we request a GDL course from Jon? He is right in that GDL has a lot of power to provide and work with within Archicad. The learning curve is immense though.
@szabolcs025Ай бұрын
Well done Tats!!! You're a great team player and colleague.
@ali.arihaniocali859Ай бұрын
2022
@gerardofaustin8156Ай бұрын
Revamping the roof wizard tool to make a floor wizard tool, which would do all the floor framing within the floor instead of using the curtain wall tool to do this. 😊
@architectEvoАй бұрын
Graphisoft, please add more functionality for structural engineering & MEP&hvac.
@george_davituriАй бұрын
🏙
@radarh7910Ай бұрын
Stair tool in ArchiCAD is terible
@tati_oliveiraАй бұрын
Someone know if the imac M3 is ok to use archicad?
@samnice1980Ай бұрын
Noch schlechter erklären kann man diese Systematik nicht.
@valentinemafuta5709Ай бұрын
Im not getting how those railings are coming on their own whats the trick there I can see you are clicking twice
@sedleyjeffers4861Ай бұрын
Excellent presentation Jon.
@user-sg3kx7qx8nАй бұрын
If Archicad would create more flexible modeling tools for morphs it would becom the best
@architectEvoАй бұрын
It has grasshopper love connection . Anything can be modelled in rhino+grasshopper and transferred live into archicad
@AikenBruceАй бұрын
Is there any link to the project so we can view it in Archicad?
@gerardofaustin8156Ай бұрын
Can he share some of those amazing GDL objects? Why hasn’t he been asked to join the ArchiCAD Structural Engineering team?
@AikenBruceАй бұрын
Is there a link to view these projects in Archicad?
@sedleyjeffers4861Ай бұрын
I think he should sell these things. For sure I will buy.
@AikenBruceАй бұрын
@@sedleyjeffers4861 so what is the community concept?
@ayan13yxqАй бұрын
Great!Thank you Jon!
@mahmoudqenawi7100Ай бұрын
Thanks GS.👏
@themoviejunky3918Ай бұрын
What an utterly bizarre tutorial
@kolotilin82Ай бұрын
AC27 UP27.2.0. The problem has returned again on 4K screens with an image scale of more than 100% in Windows 10. The lines in the drawings have blurred and sloppy graphics. The problem has been dragging on for the second year since version 26! Does anyone actually test the update before launch? Or does everything work on Full HD?
@goldenfish77Ай бұрын
Thank you so much!
@jialongdeng4792Ай бұрын
为什么我27还无法绘制垂直的管综
@DanteEspinosa-mo6nsАй бұрын
😊😊😊😅
@ParzivalPheonixАй бұрын
Love Ben
@torrz3588Ай бұрын
Hi! For those that are having trouble with increasing the height of Slanted Wall End, here's how I adjusted mine. Select one slanted wall end > right click > edit select composite/profile > modifiers > check the height stretch > save Hope this helps!
@user-dk2xz9yj2wАй бұрын
STOP THE PRESSES! Graphisoft has officially annouced the phase out for perpetual licenses and moving to subscription. Also "encouraging" users to move to the cloud. WOW! They will surelly do an orgy with our data feeding their AI model... and users will PAY FOR IT! :D We are sooo screwed. :S
@vu.discoveryАй бұрын
wow...amazing new
@BamdrapropertiesLimitedАй бұрын
lovely and amazing
@ronanlascar4187Ай бұрын
Someone know if the MacBook Air M3 is enough for a residential house in archicad? Thank’s
@mariansdraila2 ай бұрын
Judging by the ever increasing prices I would say that customer satisfaction is not really a priority at Graphisoft!
@Eiden1932 ай бұрын
Firstly, Nathan you’re doing great mate. I’m always surprised at how polite and concise you are. Secondly Sylwester, I highly recommend you to spend 15 min every day in the community. It’s obvious that you don’t completely get us (architects). It’s ok for now, you’re new. But you need to understand, even if it’s not of your day to day job. Only after you get yourself into our mindset and you see the passion, the dedication and the beauty of it all you will understand how frustrating, how painful and how tiring it is. You are in a position to make real impact and you need to get just how much responsibility you have. I hope to see the interactive roadmap sooner rather than later, because the discrepancy and disconnect will be more evident and I really hope you guys are flexible enough to steer the ship in the right direction. I also hope you guys are militating and asking for the right resources for faster development, there really is a need to be faster in development. Lastly, from my experience productivity features are always more positively viewed and highly adopted compared to trendy stuff like the AI visualizer that don’t really do much, so please consider that in your discussions.
@user-dk2xz9yj2w2 ай бұрын
No. He is not new at Graphisoft. He is this position for "almost 2 years". I understand that you are trying to be more "positive" and "Half fll glass"... But A LOT of Archicad users are tired of this "stockholm syndrome" thing that some of us are doing. Lets call things as they are. Man... When you get to know that the Director of Product Management favorite Archicad tool is MORPH!... To 3d print toys for his kid!... I mean something is REEEALY wrong where. Again: This is not a personal matter with Sylwester. The culprit is not him. It is a miscast. The ones to blame are the guy from HR and the CEO. IMO
@SkewedBIMАй бұрын
@eiden193 glad you are enjoying the interviews. I am disappointed that Sylwester’s role at Graphisoft wasn’t clearly explained in my interview with him. His role is focused on the process of delivery of the features. His position doesn’t require him to be knowledgeable 100% about the specific features that go into the software. That role is driven at the higher level by Marton Kiss and by the product management team. I personally believe that bringing in someone from outside of the AEC bubble, to drive the process of software development is the right approach. The challenge being that it takes time to see the difference due to the time it takes to develop features and release it out to the public. He is also involved in initiatives to help deliver better outcomes for users. Once again this is something that will take a little bit of time, as it is something that is happening now behind the scenes, and won’t get seen till new releases are out there. Hope that clarifies a few things for you. Regards Nathan
@SkewedBIMАй бұрын
@@user-dk2xz9yj2wI have just replied to Eidan’s comment regarding the role that Sylwester has within Graphisoft. I hope that clarifies a few things for you. I think bringing in someone to lead development from outside of the AEC space (from much larger organisations) brings new ideas on how features are delivered. Taking note that it is not his role to choose or select the features that are being developed and delivered. Regards Nathan
@FilipSmycek2 ай бұрын
super
@ayan13yxq2 ай бұрын
I need Rhino inside Archicad, haha
@user-dk2xz9yj2w2 ай бұрын
Geez! A guy from medical backgrond, Google and GE? Really?! That explains a lot... The brilliant legacy of Huw Roberts and Ron Close. No ofence to the guy, but this is Bla Bla Bla... Design Options is a HUUUUGE waist for resources. Visibility Criteria would solve this and much much more. And now they are working on keynotes? Really?! How about Centralized Attribute/Resource Management? And avoid attribute polution nightmare... Anybody there? Meanwhile SSA fees spikes, Lousy unreliable product and Nemetschek increses share dividends for the eleventh consecutive year. God save the shareholder! :D
@LuisManuelLealDias2 ай бұрын
Design options is good.
@user-dk2xz9yj2w2 ай бұрын
@@LuisManuelLealDias I don't think so. This is another pile of mess above all the existing visibility options (Layer, Layer Combination, Partial Structure and Renovation). A bandaid to fix a leaked pipe... A centralized tool to allow visibility based on criteria would be infinetly more effective.
@LuisManuelLealDias2 ай бұрын
@user-dk2xz9yj2w I disagree. Layers don't solve this issue, and renovation layers are just too specific to one important function. We've been using design options very effectively for instance in modules, where can have entire houses in a module with several design options, which will reflect the lots and the small changes required in each lot. Many other cases. And the ease with which you can just delete entire threads of design is really good. I'm sorry, I just disagree with you. It's a good tool.
@user-dk2xz9yj2w2 ай бұрын
@@LuisManuelLealDias Silver tape can fix a leaking pipe... Perhaps you can think it is a good tool... Until you have multiple leaks. But when things start getting complex in very large projects with phases and LOD, I bet you will change your mind. But hey! If it makes you happy. ;)
@StefanVidenov2 ай бұрын
While a centralized attribute management function is really needed, the new features in 27 are very nice. Exploring design options is essential in architecture and having a nice dedicated tool is way better than the previous workarounds with the Renovation tool. Your comment is not in good faith.
@OG-19982 ай бұрын
I have a PC with RTX 3060 TI / Intel 12600KF / 32 GB RAM, i am thinking about to change to M3 Pro with 16 GB RAM. I use ArchiCAD and render with Twinmotion. Do you guys think it's worth it? Or should i just keep the PC and buy additionally the Macbook Pro M3 Pro?