6:15 Can this system that you replaced be used for navigation? I'm generally interested in any information about it and the vehicle overall. My father recently bought(Sprinter 314 CDI), and we're still figuring out how everything works. Thanks

Are you still happy with your sub?

Did Fantastic Fan give the fan for free?

Great video! Thanks for making this!

I have a very similar radio that stock I believe. I don't know what version it is but terrible reception. I can't get any AM. And FM is very spotty can't even get my favorite country radio station to come in full time. I think I'm going to try to pull the radio out check out to see how or if the antenna is hooked up properly. I'm going to check out the rest of the video to see how to do it

Is the mpg live/current or is it mpg for trip/from start?

Hi- what is the model of that bypass on Amazon? Thx

😂😂😂😂😂😂😂😂

Are the steering wheel controls still working with this stereo?

Can you turn down the illumination for night driving?

How did you get the Velcro to stick to the van plastic? I’ve tried everything.

Thanks

My 2020 3500XD Sprinter 907 has basically the battery in the same location. Same ground quick connect at firewall also. However the little black plastic distribution box "pre-fuse" box is similar but different, similar fusible links and connections in it. In my case there was a loose locknut I believe where the up-fitter Thor added an additional bus bar causing my entire Sprinter to be dead, not even the emergency flashers would work. It was towed with the drive shaft disconnected at the rear. A 2019+ 907 type Sprinter video would be great!

This is the best scan gauge walk through from a sprinter owner. It’s boggling that a company like MB has not equipped these vans with such basic and important features like Mpg and distance to empty. My 2017 still doesn’t have it so I bought a scan gauge ii as well.

Great video. It's "emery cloth" BTW. I would use crocus cloth (finer grit) or 3M Scotch Brite pads (gray - fine grit) to clean the plunger switch.

I actually liked the way did it. Hole saws may not be the correct size and by cutting by hand, you get a perfect fit. Landmarks can be deceiving, always measure if you want perfect symmetry.

Check fuse box diagram here: fuseandrelay.com/mercedes/sprinter-906.html

Hi, i have a question for you. I bought the same reversing camera and the LED module that was on the oryginal does not fit. Mercedes sprinter w 906 2011. Did you have any problems because in the movie I saw that you also did not like something. Please help.

Shame they cheaped out and didn't put bolts on the spare fuse spots. Any idea what size bolts or where to order them?

Not sure if this is the same as a 2015 Sprinter, but my friend took his to the dealer. They said the rear AC belt takes a "special tool" to replace it, they want to charge him $750 for all the belts. I wonder if their "special tool" is a long screwdriver?!

I want to share my review of the Fantastic Vent 3350 because my experience with the fan is anything but fantastic. I bought mine 18 months ago, as friends, who have an older model, said it was very good. However mine makes a lot of noise and pushes so little air that I can barely tell if I have it set to exhaust or blow. If I turn it up to get more airflow it becomes even noiser! The rain sensor closes the vent at night so I can only assume that it senses the night time moisture and closes even though it is NOT raining. My friend's older model seems to push more air than my newer model. I get much better & quieter airflow from my little Sirocco fan and it was only $!60 not over $600. Dometic agreed to replace the fan and the airflow improved a little but it is still very noisy AND the rain sensor closes the fan at really odd times like late afternoon. So we can't use the fan unless we manually open the cover. So in summary, I have found it an appallingly poor performing fan that is just not worth the money.

I really like the notion of using a bar to attach the L-Track to the van. If you were to do the project again, with the likely (low) weight supported by the L-Track, would you have used aluminum bar instead of steel? I'm thinking of ease of fabrication and weight savings would make aluminum a good choice here.

I am a first-time RV enthusiast and wondered how to disassemble the pressure switch. Thanks for this.

Great install! I have a question about the crossover. I'm replacing both door speakers and tweeters. Each speakers has its own feed. So do it jus wire them in or should I use the crossover on 1 set of wires? I have door speakers wires and separate tweeter wires behind the mirror. Thank you

How did Mercedes ever get away with such a cheap crappy stereo in the first place..its unbelievable cheap n nasty with terrible sound...mines a 2007 model

Very Clever, nice video👍🏻

What's the black thing that you can takeout with screwdriver. It has a spring. My blower just stopped working and I'm sad

Nice job 👍

Is there power going to the switch at all times in this application? Or should you hook up to switch power?

My 2020 sprinter has been in the shop more than on the road 😰

Great video!...very helpful for my build. Do you have a radio install video right now? I need to know ow to put a new stereo in my Sprinter. Thanks a million for your time.

navigation that does not use cell towers is preferable. using your cell phone for navigation encourages tracking and other invasive practices. you can update Garmin, Tom Tom or any other nav system easily with a laptop.

Anyone else have the problem where it blows the fuse when starting Everytime?

Kudos for sharing. My thoughts: 1. Buy a hole saw kit on Amazon so cutting becomes trivial. 2. Flip the headliner over and there are lots of landmarks thus no measuring.

Great job. Particularly like that you walked through the fix for the factory design/fab defects on the side plates and wiring module. Git to be frustrating to spend that kind of money only to discover a problem with a cross over piece!

Buen vídeo 👌 gracias.

😀😁😬👍Awesome install! You just added the gravity fill port yourself?

Did you record this with a potato?

Heloo... music sound test please..... pointless vid other wise

Did yours had a burnt smell when you first used it?

Thank you,,,you answered a Question I had 👍🤙

Thanks for the video. I stopped after 1 min though because the image doesn’t capture what needs to be seen. You should make sure the framing is better next time.

Hello, thanks about MB printer Radio video. Please use the light the next time you make a tutorial video for others to watch.

I have this same unit and installed it last night under the drivers seat of my Mazda 3. I love it. It's not going to bang while you go down the street, but the sound inside of the car is great!

Awesome install! You just added the gravity fill port yourself?

Awesome install! You just added the gravity fill port yourself?

I want to mount this on my front seats so I'll definitely want the non-drilled holes. Many conversions have swivels on the front seats (after all, they're probably the most comfortable in the vehicle) but I want one that slides into the back. It doesn't have to do more than support its own weight back there and it's back over the base while driving so this should do the trick!

So from when this was installed to 2020 how has it kept up with time?

Hey ! I have the stock radio on my sprinter 2012. How do I connect it to the radio unit? I want the USB and Aux mounted in the dash as u shown in the video.

Does your hands free still work through the new head unit and does the steering wheel control allow you you to answer a call etc