Gorgeous

Do you really think they work?

Beautiful car

Boosted gt350 is the kill all. Nice car though.

Yes it's cool.

Thanks for sharing!

That's the first mod I did on my 2022 Mach 1

Agree thanks

Looks way better

great video. thanks

Of all the "professional' videos and how to's on changing mustang spark plugs I have found and watched, this one is by far the most useful and helpful. Great Job!

Thanks for this video. I need to change my bikes oil after I ship it.

Buddy, I used this video twice to replace ignition coils and saved myself $500-600 dealer install. I'm going to post $5 as a small thank you.

Couldn't hear it nicely :( because of the crowd :(

Thanks a lot for the video. I know it's probably non-relevant question, but how do you keep your engine so clean? Do you wash it somehow?

i happen to have a zx6r and a weimaraner ... what are the chances

I ride a 01 zx6r I can't find any vids on it hopefully this helps.Thanks your bike sounds nice too btw.

Thanks for the great video, I had my car apart last night but couldn't get the spark coils out any tips or tricks?

Hey man great vid, what year is your mustang? Did you have a ny problem im scared of doing mine since fords are known tl have spark plugs problems

Where does the grease go ?? I'm gonna replace my coils just ordered them of Amazon

I paid $360 to BMW to replace 1 coil. :( Just purchased a brand new set (6) from BMW for $380... do the math :\

Hey guys, I have a really important question. I bought a 2006 Mustang GT. I'm being told the coolant system needs a flush. I noticed the existing coolant is orange. Being old school, Green is the only color I'm familiar with. So what is up with this orange, and is that what must be put back in? I've been reading about this color coolant on the internet. Virtually everyone says this stuff is nasty and should not be used. They even day it devours the engine head gaskets. And wouldn't you know I was told by Quick Lane that it looked like I have a leaky head gasket during a oil change and multi point inspection. So, I don't even remotely know what to do or believe. Help?

I enjoyed your clip.

Use Dap contact cement. No need to remove old glue. Just follow instructions on can. Available at Lowes or Home Depot

hi could u help me pls i just bought a zx6r ninja 2008 engine to go into buggy and i have got clue where all the air hoses go theres so many if u give me ur email address and i send u picks of what im stuck with cheers ill be happy to donate too i cant get hold of any manuals showing diagrams in uk as they only go upto 2006

How do you unclip the hose things. I am able to open up the rectangle thing with the 2 hoses but not able to slide out the rear hose. Do i just pull it out or do i need a flat head screw driver to remove the long rectangle thing with the 2 hoses?

Super helpful! Thanks so much.

Nice video. Quick question. What model and year is this car. The airbox looks different than my 2008 328. But I assume most of everything is the same. Thanks!

Thanks for all the info this tutorial was great.. if i can just add 1 thing to anyone whos gonna try to pull the plugs its almost impossible to get the sparkplug tool from anywhere including your local bmw dealership. I ended up buying a 14mm 12 sided thin wall socket from sears its thinner than the normal long sockets amd also buy a magnet to pull out the plug. Then i had to grind down the out side of the socket considerably 360° of the outside so it will fit in the well. Good luck.

Cool Dude. That was so easy, it was a nagging issue. QED. Veda

I have a 2009 IS250 and it took 2 hours for both my friend and I to install this. The front 2 rubber mount hangers (at the cat-back) were SUPER hard to remove. We ended up using WD40 and a lot of muscle to remove them. In the end, we realized that they are fine left on. The instructions (which we didn't see until after the installation) says to even leave the 2 bolts in at the cat-back. I think they should be removed to keep the stress off the joint but leave on the 2 rubber mount hangers. That way it's easier to handle the mufflers. The rubber hanger mounts in the back are slightly smaller and easier to remove but still might take some WD40 (we were surprised on how easy they came off once lubricated). Also, we bent the heat shields above the mufflers but couldn't get them back into shape, so we ended up removing them altogether and reshaping them. Again in the instructions it says to remove the heat shields and and trim them to allow clearance on the hitch. We didn't have to trim them but you definitely have to remove them to get the hitch up in there. In the end the only things we wish we would have done different from the video is to leave the two front rubber mount hangers on and remove the heat shields before installing the hitch. If done right the first time, 1-2 people can do this in 45-1hr. Thanks for the video.

seems easy. electr. level aint greatest feature. cant see oil condition

3M adhesive is best. I used the all purpose like in the video the first time i did this....but when its hot outdoors like it is where i stay, the moisture in the car makes the fabric come right back off. I used the 3M adhesive and it worked perfect

when you started pouring the water in did you put the plsstic screw back on or did you just let the water drain thru the bottom of the car?

Thanks for the video. It's gonna save most viewers alot of money. Its much easier then I first expected.

This is the best video I've found. Thanks a lot!

How loud does this get compared to stock, would it upset the neighbors? Thanks!

Quick and helpful vid

why don't you actually show the steps and process itself we all know there's smoke at the end

Hey Eric, its great exhaust! nice sound. where did you order it from? Drag? its out of stock right now, just wondering how did you get it? thanks

does the coils and the spark plugs should be replaced at the same time?

right to the point, very useful video. thanks.

Thank you . I don´t know if I can do this my self , but which coils are the best to replace with ? and spark plugs ? My car is not idling as steady as before , with 50k , so I suppose this is the problem .

Great vid. Learned a lot!!! Thanks.

Great video, thanks bro

If you use Amsoil engine oil (every 10,000 miles) and Amsoil P.I. in the gas tank (every 4,000 miles) you won't need to do all this. You can put 500,000+ miles on the engine and the internals will look brand spanking new.

Got a question, I got an 07 328i Do you know If i need the specific socket, Im not sure if i need the 12 point 14mm socket can't find anything online.

Thank you!

Yo, thanks! I took my car to a shop and the guy said it would take a couple of hours to fix and it would be a couple of hundred dollars

Thanks for the video. Nice to know exactly what to do when you neVer done coil on new vehicle.