I need email

they are evenly spaced .

You're supposed to keep your foot on them to keep them in place.

American walnut

Cut it with a jigsaw 🤔

Felt - often made of recycled plastic

Hej Jonas, Tak for din henvendelse. Du skal enten bruge skruer eller montagelim. Begge løsninger holder fint. Håber det giver mening ellers er du velkommen til at ringe eller skrive :)

@@byveno-com - Vil det sige, at jeg kan nøjes med montagelim? :)

for water I wouldn't use Composite neither natural Wood... I would choose PVC panel or PVC lambrin but I am just a homeowner the channel has much more experience

Hi Ankit, Thank you for buying our products :) We do only have one ceiling video. Find it here: kzbin.info/www/bejne/hnbUaaqbjc6XppI If any questions i recommend you to ask where you bought the panel. Oterhwise most experienced craftsmen should be able to do it.

I guess it likes being covered in Acupanels :)

Hi Jonathan, Thx for the interest. Please send an e-mail. Whitin a month i can direct you to a dealer 💪

Sorry the Enligsh translation could have been better. In the video we mount the panels from wall to wall so we did not need it for that situation. We decided to do it anyways just as an example to show how they are mounted. Finishing slats are slats that is veneered on 2 sides. People mostly use them as frames. i Hope it makes sense otherwise feel free to ask. Say tuned on our channel. We will soon launch a new video showing how you can do a nice exclusive pattern with Acupanels and finishin slats.

Hi RCMJC, Thanks for your interest. Yes they are available in Canada. You can find them here: www.thewoodveneerhub.ca/ Good luck with your project :)

Hi Mahmut. Thanks for your question. Both options are possible. Most adhesives are heat restistant so i recommend to speak to you local dealer. When mounting near heat sources we do not recommend silicone.

Hej Mohammed - mange tak 🙏 flere vil løbende blive uploaded. Snart kommer en video som viser montering af loftmonterede paneler.

Hej Belal! Yes - det er en god idé at bruge rawplugs på en betonvæg! For at gøre monteringen så nem som muligt, så kan du sætte panelet op mod væggen og bore for gennem filten. Sæt så rawplugs i, og monter herefter panelet med skruer i væggen 👍 Hvis du skal have dem op direkte på en flad væg, er det også muligt at lime dem op med montage lim. Jeg håber det var svar nok 😊

Afslutningslisten fungerer faktisk rigtig godt til at "indramme" akustikpanelerne på væggen. Så hvis du fx. ikke ønsker en hel væg med akustikpaneler, så kan du med fordel bruge afslutningslisten til at skabe et flot og elegang finish på din halve panelvæg :-)

Hi! You can also use construction adhesive to glue the panels onto your wall. If this is the case, apply the glue to the panel, and press and hold against the wall 👍 Let me know how it works out for you :-)

Hi Marin! 🙌 When installing the panels, the spacing between each panel should be 13mm, which is the same as the spacing between the lamellas on the panels. This will make the panel wall look more symmetrical. The panels come in three different dimensions 2400 x 600 mm, 3000 x 600 mm, and 3600 x 600 mm depending on the type of panel you want. And the recycled polyester backing is 9 mm thick. Together with the lamella, it's a total thickness of 20 mm. Let me know if you have any other questions!

@@byveno-com Tnx mate! Would you be so kind and let me know what is the widht of single lamela?

Sorry for the late response Marin - the width is 27 mm :-) Hope this helps!

@@byveno-com so you don't need to overlap the panels with your product? in Mexico we call those panels "Lambrin" they have a very specific name... but most Lambrin here needs to overlap and you need to consider 15% of "loss" in linear meters when measuring.

This wall is made of plasterboard and a plywoodboard (behind). No need to use wall plugs when screwing directly to plasterboards. Wall plugs are only needed when screwing to a harder surface.

Hi Jung C Well if you choose a black/antrazit screw then they are almost invisible. Gluing them directly to the wall is also an option. Our slat wall panels are light weight, easy to handle but also very stabil and easy to work with.

Thanks for the nice words. Sorry we cannot make it any cheaper if we want to keep the high finish, sustainable and inviromental certifications etc on our product.

Hi Dennis, Thank you for the nice words :) Yes 265cm was the height of the wall featured in the video. Dont know where you get your info but most of our panels comes in 2 lengths: 2400mm and 3000mm. Oak and walnut even comes in 3600mm!! acupanels.dk/en/products/ Regarding the price for this wall i do not know where you get the prices. I dont think it sounds expensive for an entire wall that requires almost 10 panels in 3000mm lenght. Try purchasing a high end Scandinavian lounge chair. It will probably cost 2-5 times more.

Hi Kathrine, We use a specifik type og metal nails shot from behind.

Hi Mushtaq, This is smoked oak :-) dark brown, almost black.

This wall is made og plasterboard and a plywoodboard (behind). No need to use wall plugs when screwing directly to plasterboards. Wall plugs are only needed when screwing to a harder surface.

Hi John, The backing material is a felt made of recycled plastic bottles..

Hi Ryan, Sorry for the late reply. Yes they where mounted directly on a plasterboardwall but we used basiv mounting screws. Most screws can be used. Let med know if an other Questions. Best regards Team Acupanels International

@@byveno-com thank you for your reply mate, already installed with plain 35mm black plasterboard screws…works well 👍

Haha great! 😂 Cheers mate 👍

@@ryanclark1238 hello mate, have you gone straight into the stud work or used any plasterboard fixings?

@@VijayPonn mate I used pin nails (25mm long) and some “sticks like shit” adhesive 👍

Hi Michael. No not at the moment. Not sure if one of our dealers might be able to help you?

Hi Again MIcharl, whitin 2-3 months we have a NZ Dealer :) cheers