Any updates? How is it running? Does the throttle speed lever work through the high/low range?
@nathanloveday2742Күн бұрын
Love it, the gold rush theory😂😂 thats how my 7 year old thinks it will be when we go.. him and i just left the mangus doing some panning for a week. found alot of fly poop 😂 afew chunk bits but it was all worth it to be out in nature enjoying what God gave us with my son.... keep going cuz u never know when u might just be lucky enough to find a nugget. But there's gold in them hills for sure... thanks for the video
@carlnikolov19 күн бұрын
Did you bleed the jack every time before using
@kavemankreations19 күн бұрын
@@carlnikolov I have it in my truck box for emergency use, so it sits for long periods of time. The oil is all leaked out by time I need it, I just carry a bottle of jack oil now.
@carlnikolov12 күн бұрын
@@kavemankreations Oh that makes sense. sometimes if the case is on the side the oil can leak out. it could also be that the hydraulic rod is not perfectly symmetrical so.. even being off by a mm is dangerous.. or perhaps the O rings that seal between the piston rod are dry and cracked, over time they lose their elasticity. but you think it sitting in oil would prevent this. given it's a realtively new unit it's more likely the jack just tipped on its side and the oil found its way out. thanks for sharing.
@Edward-ik2cp22 күн бұрын
I ordered this and got a pressure washer instead so I just ordered a portable one
@earthboundmisfit511224 күн бұрын
Interesting! I live in NH and I’ve always wondered if I could pan gold from our streams. Thanks brother for the entertainment
@andielinke8523Ай бұрын
can you pan for gold in Massachusetts if you found a stream like this with mud like that
@kavemankreationsАй бұрын
@@andielinke8523 You would have to check local laws.
@airbrushdungeonАй бұрын
Just don't let it frustrate you. Often times with these budget Chinese brushes, there are quality issues that make it difficult for new airbrushers to get it dialed in, causing a rage quit. Don't be afraid to ask for help. There are tons of great airbrush artist on youtube who are more than willing to answer any questions you may have. Good luck, and have fun. Ps: Your flags are pretty killer.
@kavemankreationsАй бұрын
@@airbrushdungeon Thanks for the advice. I know there is a quality concern when you buy kits like this and I'll keep it simple, at first. 😂
@airbrushdungeonАй бұрын
@@kavemankreations Don't Get me wrong. You can get a good brush in those deals. It's just hit and miss.
@cwilson68802 ай бұрын
Prospectors rarely ever ‘just sit’ on a gold bearing body of water 😂
@keithmcnamara91232 ай бұрын
Eastman brook Thornton NH ?
@louisespinoza16092 ай бұрын
Thank you sir
@dkflower11262 ай бұрын
NICE! Kaveman!
@jennieaskew68933 ай бұрын
WHERE IS THE DIP STICK
@kavemankreations3 ай бұрын
The dipstick is where you see the opening at the top.
@josecanyousee563 ай бұрын
Looks good!
@oldpath73573 ай бұрын
looks great....Shalom.
@waltermycroft15603 ай бұрын
Nice
@creativesweet11374 ай бұрын
Very helpful thank you very much sir!
@mikemanz4 ай бұрын
seems like you didn't really pan that out to me
@kavemankreations4 ай бұрын
I shortened it for time.
@fetti4real5 ай бұрын
Like how you created a secure setup that allows portability
@ninastejskal64935 ай бұрын
💕 Promo_SM
@larrygreen85205 ай бұрын
Same issue. Mine leaks from the release valve through the o-ring. It leaks from the pump valve. I disassembled it and no gasket or o-ring. Give it a 3 because it does pump but leaks like a sieve. They should sell it with a free gallon of pump oil.
@livefreeordie55345 ай бұрын
Go ahead, make my day, say, MADE IN CHINA.😡
@mrfuel18665 ай бұрын
Just replace the o rings...
@carlnikolov19 күн бұрын
How,?
@Gpabatman5 ай бұрын
The neighbor watching....hey that's the wrong bush! Hahaha.....nice tractor
@deborahelliott84606 ай бұрын
This is PERFECT! Thank you for this video. I want to make one like it. Do you have the plans? I think a smaller version would be so awesome, it would be a outstanding service tray. Of course, this wall art would be expensive with epoxy colored in so it makes it more valuable. I like this though. Thank you for the inspiration! It's not a coincidence my business name is Grafted corner woodworks. This would be way perfect for me.
@kavemankreations6 ай бұрын
There are no plans. I had an idea and just make it up as I go along.
@deborahelliott84606 ай бұрын
@@kavemankreations Mind if I copy this then?
@kavemankreations6 ай бұрын
@@deborahelliott8460 Not at all, enjoy.
@simonreynoso86646 ай бұрын
Both are good but the natural wood one has a pop to it !! 👍
@andre1987eph6 ай бұрын
That's a specialty tool to get in tight places. When you need one, you need one.
@fernlintner656 ай бұрын
This is going to be awesome!
@edsecorr78126 ай бұрын
Very nice thank you
@dougfreedom52006 ай бұрын
Should have it looked at loosing hydraulic pressure is signs of a weak or dying hydraulic pump
@gregsmith69826 ай бұрын
Thanks for the video. Where did you get the metal template you used for the stars? Thanks again!
America is not having it's best days at present but (I gotta confess) sometimes i wish i was American just so i could get all this cool sh!t with the Star Spangled Banner on it. It is the best flag. (My British flag is a close second) Both are red, white & blue. But there is a lot of cool stuff out there with the American flag on it. This Heart included. Note:- Any Brits (or anyone) that doesn't know the story behind the flag, really should research it. It's a brilliant True stoty, that Honestly made my eyes sting and water a little. (And my ancestors were probably on the ships) God save the King 🇬🇧 God bless America 🇺🇲
@89Johneboy6 ай бұрын
bandsaw scared the fuck out of me dude lmao
@fancreations7137 ай бұрын
What’s the size of the heart you used to mark it out? Great work
@kavemankreations7 ай бұрын
It's 13 1/2 in tall and 13in wide.
@waltermycroft15607 ай бұрын
Great Vision
@kavemankreations7 ай бұрын
Thanks!
@jamesrowe63897 ай бұрын
Love it! Just picked up a heart cutout while in town. Going to start one of these today. Subscribed.
I've been focusing on wood products this winter, the flags are just one of several new products and I'm getting to old to do everything by hand. lol! I have 1 of the 2 necklaces done also.
@thecarter70258 ай бұрын
Stand a little bit back cuz it’s harbor freight 😂
@matthewhayes77659 ай бұрын
Hiya, do you still own this tractor? I'd love to know how youre getting along with it, if you stilk do
@kavemankreations9 ай бұрын
I do still have it and it's still impressing me with it's usefulness for it's size.
@matthewhayes77659 ай бұрын
@@kavemankreations so no issues with the transmission or anything? Even after pulling out the bushes and what not...
@kavemankreations9 ай бұрын
@@matthewhayes7765 Nope, no issues at all. I have torn up gravel and sod with the grader blade , dragged the York rake around the field catching small roots and ripping them out. I've been really impressed with it.
@louie518710 ай бұрын
Balance the wire wheel with lead tape. Thanks
@CORE1.8MINISTERIES10 ай бұрын
I think it was not mud but clay but I could be wrong too
@spresc218010 ай бұрын
I bought the Harbor Freight Central Machinery 3 inch with a 3.25” opening, today. Quality seemed good and I agree that the screw could use some grease.
@user-ll1hl5wb2o10 ай бұрын
зачем так долго крутить ?
@kavemankreations10 ай бұрын
поскольку золото такое маленькое, вы можете его пропустить.
@treasurehuntingscotlandmud9340 Жыл бұрын
little barrel tap well down
@marlinziggy6971 Жыл бұрын
there is a reason the machine has rops
@alexadler1335 Жыл бұрын
What wire wheel did you buy?
@kavemankreations Жыл бұрын
It was the one that came with it.
@alexadler1335 Жыл бұрын
@@kavemankreations I bought one and it just came with the two stone wheels… nothing else
@kavemankreations Жыл бұрын
@@alexadler1335 It's a pretty abrasive stiff wire wheel. I'm looking for more of a polishing or cleaning one to replace it, I have a buffing cloth wheel on the other side, which was a grinding stone about 120 grit.
@6atlantis Жыл бұрын
@@kavemankreationshow does the wire wheel do taking rust off of a larger piece? I’m thinking of buying one today because they’re on sale, but I saw another video where it looked like it was bogging down a bit. Thanks
@kavemankreations Жыл бұрын
@@6atlantis It takes the rust away fast but you have to be careful because it will take material with it. So if it's a percision piece it will make it smaller.
@UFCANT Жыл бұрын
These things are garbage! Typical Walmart garbage! Had two and both did the same thing!