Пікірлер
@jimmymiller4732 Күн бұрын
Great to see you back Dwayne! Any chance that we might see you run a comparison Video on the Cal Trimmer - Catalyst, Rolux and the Revolution-26?
@dwaynesworldlawn Күн бұрын
I would love to but don’t quite have the budget or the resources. Even with that said it doesn’t mean it’s not something i am striving to do. I appreciate your support 👍🏻
@robertatkinson7517 2 күн бұрын
Great 3 step video. I am glad you show how things are in the real world. Things happen with life and yes you can recover your lawn back to your 2023 awesome yard. I am in the same boat this year and in the recovery process as tell. Keep up the great content and tips for the everyday yard enthusiasts. Cheers 🤙
@dwaynesworldlawn 2 күн бұрын
Thank you for the kind words Robert. Well said. I hope your recovery goes well and wish you the best 👍🏻
@juanmena4676 3 күн бұрын
What is your end result HOC?
@dwaynesworldlawn 3 күн бұрын
3/4 inch but i may raise it to 7/8
@TheLawnSauce 3 күн бұрын
Looking great and recovering quite nice! A testament of “putting in the work”. Enjoying your content, keep up the good work!
@dwaynesworldlawn 3 күн бұрын
Aloha. I liked a lot of the videos you put out on your channel. I really appreciate the comment and support 👍🏻
@robertlevy4613 3 күн бұрын
Watching this series all at once - I just did a HOC adjustment last week and scalped my yard down from 1.5 inches to .5 inches so I can get it back to 1 inch. Trying not to panic, but I know it’ll come back. Bermuda is bulletproof
@dwaynesworldlawn 3 күн бұрын
Not only come back… but come back looking much better since you reset your lawn. The week to 2 weeks that it will take to comeback will be all worth it. I promise you 👍🏻
@robertlevy4613 3 күн бұрын
@@dwaynesworldlawn thanks Dwayne! Great work in the lawn can’t wait to see it looking A1
@robertlevy4613 3 күн бұрын
Damn that Bermuda recovered damn well - another 2 weeks and it’ll be 1000%. Well done Dwayne. Great video.
@dwaynesworldlawn 3 күн бұрын
That’s you Robert!!! Yes I’m excited, and it will only get better 👍🏻
@robertlevy4613 3 күн бұрын
@@dwaynesworldlawn can’t wait to see it
@randyvelarde7448 3 күн бұрын
Yes the rev 26 at 3/4” isn’t stripping
@dwaynesworldlawn 3 күн бұрын
It’s surprising and in some ways not surprising. The reason i say not surprising is because i had a seen a couple of post on the forums where people have complained. I would reach out to Lee and the guys at reel rollers for any tips they may have. 3/4 inch a good height of cut but you can go 7/8 or 1 inch and it will still look great and may produce better stripe action. Sorry i can’t be of more help 👍🏻
@enzomoya1689 3 күн бұрын
Lawn looking great! Looking forward to the next vid as my Mclane needs an adjustment and a backlap!
@dwaynesworldlawn 3 күн бұрын
Thank you!!! Hopefully will be able to out the backlap video sooner rather then later. My Mclane definitely needs it 👍🏻
@robertander1386 4 күн бұрын
What a wonderful surprise!!!😂Video on Sunday.😊You made my day better.😂
@dwaynesworldlawn 4 күн бұрын
That’s an awesome compliment. Thank you for the support !!! 👍🏻
@randyvelarde7448 4 күн бұрын
It’s celebration Bermuda
@dwaynesworldlawn 4 күн бұрын
3/4 inch is a good height for stripping.
@randyvelarde7448 4 күн бұрын
Nice job. Are those bare spots from weed spray and spring dead spot? I recently purchased the rev 26, I had the 20” Mclane, I’m disappointed I’m not getting the stripes even after double n triple cutting it at 3/4”. Any thoughts
@dwaynesworldlawn 4 күн бұрын
I can’t answer for why the bare spot existed, but for sure not from the week killer. I am Linking it to the overseeding and not spraying out the rye grass sooner. As far as not stripping are you referring to the revolution ?
@joelhernandez4546 4 күн бұрын
Lawn looking on point man good job 👏
@dwaynesworldlawn 4 күн бұрын
Appreciate it!!! 👍🏻
@Moondoggy1941 4 күн бұрын
1:22 How to say you live on a Cal-da-Sac without saying it.
@dwaynesworldlawn 4 күн бұрын
I actually don’t live in on a cal da sac. lol. I know it seems weird. I will say my street was originally going to be a cal da sac but the city made them change it due to not having enough exits for emergency response. Go figure. lol 😂
@geomark8851 4 күн бұрын
The recovery is looking great! Can you water when and as much as you want? That Bermuda is responding nicely to the fertilizer.
@dwaynesworldlawn 4 күн бұрын
I actually thinking of doing a watering video showing the sprinkler i use. I currently don’t have any water restriction. We have zero rain most months out of the year and wouldn’t have grass if it wasn’t for irrigation. I appreciate the compliments and the support 👍🏻
@sarakozak1816 4 күн бұрын
I have this exact mower it’s a 10 blade maybe slightly newer not sure and it has the grooves front roller and I can’t get it to stripe my yard to save my life is it because I’m cutting on the lowest setting?
@sarakozak1816 4 күн бұрын
Please help I want these stripes my grad is Bermuda what am I doing wrong?
@dwaynesworldlawn 4 күн бұрын
I am assuming Bermuda grass? and is it the Mclane front grooved roller?
@H0kieJoe 5 күн бұрын
No grease zerks for bearings is a negative, not a positive.
@dwaynesworldlawn 5 күн бұрын
I can see your point, but you have to consider some people view less maintenance items as a positive.
@kentfiedor9159 6 күн бұрын
thank you for this. No one else provided the details nor explanation you did. I watched this multiple times and picked up on more each time. I literally manually pushed my lawn last night and it was tough. Realized later that the back bracket was too tight on belt. My belt was frayed and stretched. Got new belt today, replaced and now mower pulls me all over the lawn. 😅 Thank you for all you do and continue putting out great content.
@dwaynesworldlawn 6 күн бұрын
Definitely one of the nicest compliments i have received on my channel. I’m glad it helped and is the reason i put out these videos. It’s comments like yours that keeps me wanting to continue to make videos on my channel. I appreciate the support 👍🏻
@vancat11 7 күн бұрын
I just purchased everything mentioned in the video, minus the one floodjet nozzle. In the Aimela 6 piece nozzle set came with a nozzle that has an adapter. What is that adapter size so that I can purchase another one for my other quick connect? I'm new to all this, so thank you for the video.
@vancat11 7 күн бұрын
Never mind. The product information on Amazon says the info.
@dwaynesworldlawn 7 күн бұрын
No problem. I’m glad you got the answer you were looking for. I really like the sprayer and feels its a good value.
@vancat11 7 күн бұрын
@dwaynesworldlawn I enjoy watching so thanks for being there for us newbies.
@jkca1473 8 күн бұрын
Found one of these locally that I’d really like to buy but I think it needs a decent amount of work and it would be my only reel. Planning on getting a 20” regular Mclane instead
@dwaynesworldlawn 8 күн бұрын
I can see your point. Not the worst idea considering they are temperamental in opinion and replacement parts are hit and miss. One thing i did not mention is the height of the handle bars are shorter than other mclanes, which can make it more uncomfortable for some especially if you are tall.
@robertander1386 8 күн бұрын
Your lawn looks great. Looking forward for the next one. Cheers!!! 😅☺️👍
@dwaynesworldlawn 8 күн бұрын
Thank you for the support and hopefully will be putting out a video with update. 👍🏻
@lindonvogler2738 9 күн бұрын
Love my CT and wanted to point out that when the video first started it sounded like it had too much air to fuel ratio causing it to rev high and low. Maybe I’m wrong but mine did the same thing and after taking the carb apart was able to clean it and fix the problem.
@dwaynesworldlawn 8 күн бұрын
Thank you for the feedback. It’s a great example of using all the senses to spot mechanical issues. Love it!!! 👍🏻
@G224u 9 күн бұрын
Finally...someone who gets the Bako temps!! I love your content sir...and i need some help. Over the last few weeks...my lawn has gotten infested with Nutsedge. Ive already cut some watering, but its starting to take its toll on my grass. Any advice to get rid of the Nutsedge?
@dwaynesworldlawn 9 күн бұрын
The 2 options that work best is either certainty or sedgehammer. These will be the best without hurting the Bermuda. An alternative option is to buy image but image takes for ever to work and is watered in vs. leaving it on the foiler. I know you can buy sedgehammer is smaller packets to save cost if you dont have a small lawn. Nice thing about certainty is that although pricey is one of the best herbicides to take care of sedges but also poa in the winter. Hope to is helps. 👍🏻
@enzomoya1689 11 күн бұрын
I'm in Bako as well. Me n the boys were mowing at 6 am!!! 😂 Too damn hot to be out there whens it is over 100°!!! I triple cut the front. Back n forth twice and one diagonal. Could have went another round but the green can got full. I need to scalp but just scared 😂 Will be waiting for the 3rd installment of fixing your lawn!
@dwaynesworldlawn 11 күн бұрын
Nice!!!! Yes it very hot!!! 🥵 appreciate the support 👍🏻
@geomark8851 12 күн бұрын
You are having the summer we had last year - over 60 days of 100+ heat and no rain. Our water supplier put stage 3 restrictions on watering and my yard suffered so much. The chinch bugs took over the St. Augustine and I lost big patches all over the lawn. The Zorro Zoysia front yard withered and grew even slower (if that is possible). This year is totally opposite - we are already over 42 inches of rain and just got another 2.3 inches with an unusual July "cold" front. Temps are still in the low 90's but that is so much better than 100+! We are supposed to get more rain next week and the lawn is lush. I am mowing every 3 days and I will probably have to switch to every 2 days. So hang in there, things will eventually change! At least you can still irrigate!
@dwaynesworldlawn 12 күн бұрын
Thanks for the comment. What a different 1 year can make. I really appreciate the support and party on in the 90’s 👍🏻
@joelhernandez4546 12 күн бұрын
That tru cut looks familiar 🤔 great video man keep up the good work
@dwaynesworldlawn 12 күн бұрын
It does! lol. Thanks Joel !!!
@0ItaliaUno0 15 күн бұрын
What backpack sprayer did you use?
@dwaynesworldlawn 15 күн бұрын
It’s made by Alientabi. You can find it on Amazon. I have linked a video to it in the description.
@brianransome9042 18 күн бұрын
Great information thanks for the video. I just got my rotary scissors a couple of days ago.
@dwaynesworldlawn 18 күн бұрын
Nice!!! They are great 👍🏻
@enzomoya1689 18 күн бұрын
Welcome back! This year was the first I put down a pre-emergent! 😂 I always battled crab grass and just let it do its thing. Well, what a difference pe makes! I still have a couple spots along the edge where crab grass came up but it was an easy pluck. Few spots in the front, again it was an easy pluck. Im dealing with spurge in the front and purslane in the back yard. Had my sons plucking spurge today but it got hot. Ima guess on next video you will be spoon feeding for a good green up!
@dwaynesworldlawn 15 күн бұрын
Glad you were able to get a grip on the crabgrass. Next year will be even better since you won’t have as many seed dropping into the soil. Appreciate the support!!! 👍🏻
@codytaylor8129 18 күн бұрын
Been wondering where you’ve been haha. I love how Celsius doesn’t have any temp restrictions. I just treated with it and sprayed late in the evening, this valley heat has been brutal.
@dwaynesworldlawn 18 күн бұрын
It’s good stuff. As always i appreciate the support!!! 👍🏻
@ijazmohammed588 18 күн бұрын
Looking forward to the progress.
@dwaynesworldlawn 18 күн бұрын
Keep an eye out for my newer videos
@geomark8851 18 күн бұрын
Glad to watch another great episode and eager for more. I need a little sanity in this very insane time.
@dwaynesworldlawn 18 күн бұрын
It’s funny you say that…. I think making these videos keeps my sanity. lol. Appreciate the support !!! 👍🏻
@predlsu 19 күн бұрын
Hi Dwayne - thank you so much for this video...Quick question, I got the whole thing installed but I can't get my blades to spin even with clutch all the way down. Is this where I need to make an adjustment with the cable positioning with the nuts?
@dwaynesworldlawn 19 күн бұрын
I can’t say if totally. I will say that when adjusting the cable you only need to adjust one side of the cable. The only reason it’s double sided is because it needs mounting points on both side. Take a look at my belt replacement video as it will be helpful to adjust the clutch. Here’s the link kzbin.info/www/bejne/hXbMXmqsiLJsn8ksi=tcnaGQioS5uBWbTT
@charlesbashforth 20 күн бұрын
Hi, Allett recommend that you either remove or raise the little grass rake behind the front roller if you are using the scarifying or verticutter cartridge as it can dig into the soil and degrade the battery quicker.
@dwaynesworldlawn 19 күн бұрын
Thanks for the tip!!! Definitely makes sense. 👍🏻
@qmoonwalker3847 23 күн бұрын
great video! Just got one of these beasts. Very useful video!
@dwaynesworldlawn 23 күн бұрын
I’m glad you enjoyed the video, and congrats on your new mower 👍🏻
@robertgiguere875 24 күн бұрын
It’s mid summer in New England, could I use this new Stay Green without worrying about burning my lawn?
@dwaynesworldlawn 23 күн бұрын
I would not say it’s impossible to burn your lawn, but as long as you are following the bag rates it should be good to go. Make sure to water in right away and or plan to apply when rain is expected within 24hours. This will also help to prevent it from burning the lawn. Thanks for the support 👍🏻
@Trump985 27 күн бұрын
No grease fittings is not good! I’ve had cars that had no grease fittings and the front end parts didn’t last 15,000 miles! The replacement parts fortunately had grease fittings and they have lasted over 150,000 miles! Now obviously if you don’t grease them they won’t last but if you simply grease them once or twice a week they will outlast non greaseable parts exponentially.
@dwaynesworldlawn 24 күн бұрын
Great point as it always nice to know that the bearing are getting the grease needed vs assuming the sealed ones are good to go.
@RussC123 29 күн бұрын
Sorry if I missed it but how many sq ft are you mowing with that GM1000? I’m trying to determine if the 21” width is good enough for my 6500 sqft or if I should go with the 26” wide GM1600.
@dwaynesworldlawn 24 күн бұрын
6900 sqft. You can get away with 21 inch but if budget and space allows, the 1600 maybe a better option.
@mr.dcfitted8713 Ай бұрын
Dwayne how high can you cut with a reel 3”?
@dwaynesworldlawn 24 күн бұрын
I would say nothing more that 1 3/4. Anything higher you are better off with a rotary mower.
@DeVincey Ай бұрын
Which “wheel still spinning” are you talking about? The actual black wheel of the blade fly wheel?
@dwaynesworldlawn Ай бұрын
I was referring to the reel still spinning when not depressed if i understand your question.
@DeVincey Ай бұрын
Had a question for you, or anyone really. I recently had to replace my belt because the other one shredded even though I just bought it back in May. I replaced the belt and went to use it today but it felt off. Seeing your video reminded me that I forgot to put that green arm back in the right spot that is there to guide the belt. I’m not sure if this is what made my mower self propel by itself as I engaged the level for the assisted propel of the mower but my mower was moving on its own and the blade was spinning. To stop it I had to disengage the propel level but the blades keep spinning despite not holding the handle to engage the blades. The mower did feel more powerful at the wheel and jolted forward more and it definitely took more force to stop the mower. Wondering if maybe it was just that green bar that guides the belt or if the clutch needs to be adjusted? Any ideas?
@dwaynesworldlawn Ай бұрын
The clutch arm and green back arm guide both have some adjustment. When replace with a new belt, even when set properly, the reel may still spin without the cable being pressed. This is normal as the new belt needs to be broken in. After a mow or 2 it should be good. If it still continues there after it may be set too tight causing the reel to spin when it’s not intended too. Hope this helps 👍🏻
@greglyon9345 Ай бұрын
Are you coming back anytime soon? I hope that you’re doing alright
@dwaynesworldlawn Ай бұрын
I hope too. I am working on a video and hope to put it out along with a few more this growing season.
@fredamerson2116 Ай бұрын
I used the video while I did this mod and it was very helpful. If you are debating about whether this mod is worth it, I'm only 5'8" and the stock height was giving my 67 year old back a bad time. So much better at the higher level!
@fredamerson2116 Ай бұрын
PS. I added a Reel Rollers grooved roller at the same time. With these 2 mods my mower is so much easier to maneuver in my small yard!
@dwaynesworldlawn Ай бұрын
Thank you so much for the feedback. Yes it the way every cal trimmer should be sold. I feel it brings the mower to a much more natural position. I also like the drop wheel lever is now in higher and better position.
@robertlevy4613 Ай бұрын
This video was DAMN good. Well done Dwayne. Subbed
@dwaynesworldlawn Ай бұрын
Thank you Robert!!! I appreciate the support and the kind words
@terrybuckalew6874 Ай бұрын
how do you put the wheel back on an edger mine fell off
@dwaynesworldlawn Ай бұрын
I would think it would screw back on. As long as the screw is not lost and you are able to put it back in it should be ok. Sorry if this doesn’t help
@jscarter5555 Ай бұрын
We miss your videos, Dwayne!!
@dwaynesworldlawn Ай бұрын
Thank you. I appreciate the support. I will do my best to put out some new content. 👍🏻
@abelsalinas4798 Ай бұрын
Can the CT cut 100 💵 bills? If so I'll order it next week !
@dwaynesworldlawn Ай бұрын
It definitely can!!! lol 😂
@toddhickey1956 Ай бұрын
Do you need to water-in these products within a specific time period?
@dwaynesworldlawn Ай бұрын
No none of these have to be watered in. I generally will let them stay on the leaf for at least a day before running irrigation or expect rain
@ncsupilot353 Ай бұрын
Bonus...you showed me how to fix my throttle cable that hasn't ever worked! I'm not a small engine guy so I didn't really know the ins and outs. Thanks!
@dwaynesworldlawn Ай бұрын
That’s awesome. So glad the video helped you out. 👍🏻
@JESSERMENDEZ-mf1rg Ай бұрын
I bought a McLane last year, nothing but trouble….that machine is trash , three months after I bought it the rear axel broke. Nothing but trouble since I got it . And had too pay 3 times more than my last one…NEVER AGAIN WILL I BUY ANOTHER MCLANE !!
@dwaynesworldlawn Ай бұрын
Sorry to hear about your bad experience. At least now there are a few more options to go with. Good luck and appreciate the support 👍🏻
@J_Bick Ай бұрын
Lawn goals!!
@dwaynesworldlawn Ай бұрын
Yes indeed 👍🏻