9 ай бұрын
Жыл бұрын
Пікірлер
@TheHypnotstCollector 29 күн бұрын
oops, got water on the lens.... in video the wood shape suggests some kind of animal, like a short legged short tailed dog.
@edwardhurst2533 Ай бұрын
Can you elaborate on the engine you are working on? Would it possibly be either a 55 or 56 Chevy 265? Those engines are designed with a bit different oiling system that "pulses" rather than pumping. They are designed so that oil is only delivered to the lifters and valve train if flat on the camshaft is aligned with the cam bearing oiling holes so you don't get full oil pressure all the time.
@TheHypnotstCollector Ай бұрын
350 Chevy, c.1976.
@jessejarzabski5076 2 ай бұрын
Exactly, it's counterintuitive, I just took apart my 2001 kx125 (same cases as back to 94 I believe) and after 55 hours the seal did its job perfect, never any leaks or issue w cross contamination w coolant/oil.....and just like you say...the bigger muddle seal goes in first w thinner lipped side facing up/packed w grease......and the thinner seal faced backwards, not forwards like would be the intuitive compulsory default thought tht most average mechanically inclined individuals would assume.....I even remember when I pulled the impeller my first thought was..."oh boy, looks like this guy may have put the seal in backwards".........and some arrogant narcissistic people would actually see tht, say it can't be right, JUST LOOK AT IT!!!..(AS IF Looking at nething is the one thing that defi itivley demonstrates the universes deepest secrets and thts all.u.need ro chaulk sumtin up as a "divine" entity, yet again making another quantum leap, or shall I say quantum dive into the abyss of arbitrary information).... "I'm putting the seal in the way it supposed to!!!!!"".....they say, and not even reference online or a manuel, just assume it's wrong.......uggggh half.the prob w our country these day
@joseluissaavedra4364 2 ай бұрын
What's the compression after new rings?
@joshuagrimes1905 3 ай бұрын
Do I have to break the glaze if it's a new cylinder
@TheHypnotstCollector 3 ай бұрын
IF it's new it should be ready to use.
@TheHypnotstCollector 3 ай бұрын
Vette originally had 3:70 gears. I accidentally installed 3:08 gears. I thought it felt kinda odd and slow when I measured the 0-100 I came up with 10 sec +/-. But I was measuring 0-120, not 0-100! Then I installed the 3:70 gears back in the car.
@zlatkofilipovic1509 4 ай бұрын
Haw piston goes in cylinder ? Arrow must be up or donw ?
@juanfernandohernandez9981 2 ай бұрын
Did you put it up or down?
@kenmcrae8591 4 ай бұрын
Was that the same Phil Haney who was a DHS Officer, wrote a book about the USA surrendering to Jihad, and who was also a lay Bible teacher?
@TheHypnotstCollector 4 ай бұрын
I don't know. When he died I lived a few miles away so I went to the scene. He was well known "out here", in the area.... one of those families that settled in the area c.1860.....There should be more info on youtube and google.
@nicdisano7459 4 ай бұрын
i have a 1996 and my manual is junk compared to yours. where did u get that manual? it would be a massive help to see pictures of the 1996 transmission gear order if it shows that. thanks for the video!
@TheHypnotstCollector 4 ай бұрын
I bought the manual off of ebay. and I had to replace my trans and I got it from ebay too.
@TheHypnotstCollector 5 ай бұрын
Yes, the guy is a Mormon and the post master in Prather, a Mormon town, is Mormon. Darla Lee, the post master, told him about me selling and buying books on Mormonism. Mormons hate contracts so he broke the contract I had with his wifes son to remove all the scrap metal on the place, He lost in small claims and in Civil. He spent over $180,000 trying to find a way to sue me.... that also failed!
@davidrathbone4029 6 ай бұрын
At 40+ years old, it's sure to be those big capacitors in the power supply that are your problem. They have a limited life span. Replace all the caps including the filter caps with new electrolytics, and chances are you'll be up and and running again pronto. The values in microfarads don't have to match exactly, so long as they're the same as or greater than the old ones.
@TheHypnotstCollector 6 ай бұрын
Thanks. The designer and maker of the amps died 2 yrs ago so I can't ask him for help. What are filter caps.... If I plug in the amp shouldn't the capacitors "fill up" and then I can measure their capatity or discharge them? I can perform basic "acts" but I know nuthin about functions/ design etc... I can rewire them for 8ohms, I know that much. But the Amp is very "clean", no noise, s/n-115db...Speakers are wired in series so he made a high impedance amp. Designer of amp designed entire U2 cockpit array's and installed them. Had patents in IR and microwave. these things were something he cooked up one day in his garage. I haven't touched them since I made this video and I was going to rewire as 8ohm. But I'd rather keep the amplifiers r box's c. 1980.
@joe-hp4nk 7 ай бұрын
The sbc has the best oiling system in the business bar none.
@codyevingham2329 7 ай бұрын
Where do you find part at for your I have a 4430 and I'm having a hell of a time trying to find parts
@chrislewis3083 7 ай бұрын
There supposed to fit tite so the coler can seal
@TheHypnotstCollector 7 ай бұрын
Yes. The problem here was the O ring was the wrong size and I had to search thru my collection of O rings to find one the would fit and allow the C clip to fit on the transmission shaft. P.S. > stay away from Hot Rod products, there can be issues.
@Mr.Westery 7 ай бұрын
Hey, mystery enthusiast! If you have an interest in the unknown, you should watch the latest crime documentary video. This video is filled with events that will leave you astonished!
@noelshelley-v4w 9 ай бұрын
YOU WERE HAD ! In 2013 I was buying complete new diesel engines through a lister dealer for £1300 in the UK.
@TheHypnotstCollector 9 ай бұрын
I looked all over for parts. Cummins had us by the short hairs. But it doesn't matter now. The entire forest, some 700,000 acres, burned in 2019. The "Camp Fire" took out the entire San Joaquin River drainage. And this place was also being devored by pine beetles. But yes, we were had.
@IExposeMormonism 9 ай бұрын
I can hear your mic misbehaving.
@voidisyinyangvoidisyinyang885 11 ай бұрын
I got his autograph !! Heard him in Minneapolis. He scared me up close though. hahaha.
@cherylcoyote Жыл бұрын
Wow, beautiful area! I'm suprised no one has stolen those gas pumps. People can be such d!cks.
@frankmadonia8525 Жыл бұрын
what’s the manual that you have??
@Blood_Boltz Жыл бұрын
What about the sealer they put down in all the seams.? It's like concrete. And the whole building is set in the concrete pad.
@mr.channel6467 Жыл бұрын
You just used the grinding wheel or what?
@TheHypnotstCollector Жыл бұрын
do not use a grinding wheel, wire wheel, sand papers, solvents
@mr.channel6467 Жыл бұрын
Wy not any solvents? Honestly I had to use Chem dip to get of a BUNCH of stuck on deposits. Like it was the last resort. It’s like they Never cleaned it, that and used the cheapest 2-stroke oil. But the stuff seamed to work fine nothing happened to the parts I dipped, it only cleaned it off some more.
@mr.channel6467 Жыл бұрын
@@TheHypnotstCollector I understand not using a grinding wheel though
@alliggins2373 Жыл бұрын
Just curious what type of solid lifter were you using ? There are a couple of types for Chevys. A piddle valve lifter where the oil hole in the lifter is located in the " Waist " or machined out area in the body of the lifter. These lifters expose this area to the lifter oil galley and will send a generous amount of oil to the top end. The other type is known as an " Edge Orifice " lifter that the oil hole is not located in the waist area but is a hole drilled into the body of the lifter that does not get as much exposure to the lifter oil galley. These Edge orifice solid lifters take oil from the clearance between the lifter bore and the body and are designed to Reduce the amount of oil going to the top end. Chevy used Edge orifice solid lifters as OE on some engines but most Chevy solid lifter engines used the much more common piddle valve lifter, The Edge orifice lifters were said to reduce the oil to the top end by 20 to 25% . This was back in the day when people thought that too much oil to the top end was a big problem and the edge orifice lifter was designed to help that so called problem. But I cant tell from the top of the lifter which type you have. Looking at the lifter out of the lifter one could identify it in seconds.
@TheHypnotstCollector Жыл бұрын
The cam was Camonics. I built the engine in 1989. I was told Camonics owner and Vic Eldebrock were friends. The cam (and lifters) were designed for Vic to use in some drag racing class. I never raced it. It had 530 lift and 300 duration both sides. Forgot the overlap..... the lope didn't come off untill 3500rpm. Reved real nice to 7800. I posted "The Last Fremont Drag Race" (1989?). had my 59 Corvette there.... had ignition miss, did 12.8@113. 3:70 gears... Should have done mid 11's. I only raced it twice. first time Fremont had just repaved and it was Slippery. The regulars just packe dup and drove home... I had 3:08 gears. first gear was 88mph! Spun all the way thru the 1/4.... 13.6@108. I sold this engine last year. Hope that helps.
@awoods5318 Жыл бұрын
I have a jr 50 for my son, bought a rebuild kit and the piston ring seen too tight for the groves in the piston
@TheHypnotstCollector Жыл бұрын
Not sure what the ring gap is for a jr50 but it should move up and down! try a feeler gauge, I would Guess around 002-003
@mountainmatters6402 Жыл бұрын
I cant get the piston to go into the cylinder. Any tips or tricks?
@TheHypnotstCollector Жыл бұрын
make sure it fits without the piston ring on. install the ring buy itself and check the ring gap. Not sure what it should be but 004 should be ok. make sure the ends of the ring are on both sides of the little pin in the piston ring gap that keeps the ring from rotating in the bore
@misty8634 Жыл бұрын
This person goes on other videos and tries to destroy a fundraiser to create a park for kids. Shame on you!
@faraway3032 Жыл бұрын
Ive always buit the panels on the ground and stood them up indiviually.
@hypnosisbyrandy Жыл бұрын
This looks like my bush hog utility vehicle Th440 just curious if you could tell me where the fill plug is on the rear transmission for oil or grease I think I have a leak
@TheHypnotstCollector Жыл бұрын
Hi. I don t remember, it's been 7 years. If you can't see on top of the housing I would use a mirror and look around the top of trans housing. As a Sidebar, this entire place, 12000sqft, burned in the "Camp Fire" of 2021. This was a 20 acre parcel. 500,000+ acres burned, the entire San Joaquin river drainage. No trees to suck up the moisture now.
@hypnosisbyrandy Жыл бұрын
@@TheHypnotstCollector thanks I’m sorry about everything that happened
@hypnosisbyrandy Жыл бұрын
I lifted the bed on the TH440 and I see a small knob or cap that looks like it might be a fill cap tried to twist it with pliers but do not want to break it it’s about the size of a dime can you tell me what type of fluid goes in there or grease like 70 weight example and how the cap comes off. Don’t know how to send pictures on here but I have pictures of it. Thanks again for your help Randy
@JohnDarsey51 Жыл бұрын
Like looking at beautiful naked girls, lol... 🤣🤣 New blade is a marked improvement! Sure is pretty wood!!!
@TheHypnotstCollector Жыл бұрын
There will be 3000+/- bdft in the coming months. Maybe redo the corner horns in black walnut veneer?!
@TheHypnotstCollector Жыл бұрын
I love this stuff. It's like candy
@arboristBlairGlenn Жыл бұрын
Helped a neighbor built this same mill. That was quite a job! Now I have rights to use it! Nothing like having the mill set up on your own place though. Be sure to show what you do with the wood.
@TheHypnotstCollector Жыл бұрын
Thanks. Had some rain, had to move some walnut stumps. Have black walnut ready to slab and record today, Monday. Thanks. Chipping out the clay was the tough work
@arboristBlairGlenn Жыл бұрын
My brother owned 200 acres between Fiddletown and Plymouth. I love the gold country. Spent the night once in the Volcano hotel. With those thin walls and creaky floors, it was an experience. The ghosts were coming out of the woodwork! The bar downstairs made sleep difficult until they closed down.
@TheHypnotstCollector Жыл бұрын
I parked my 850 pound BMW K1200 in front of the St George in Volcano and it just rolled off the stand and fell over..... No harm except to my ego and back.... They are designed to be picked up but.......
@TheHypnotstCollector Жыл бұрын
I did Not make this video but I make it into a movie. 0 to 60 in 4ish....seconds
@jamnoise72 Жыл бұрын
😍
@TheMindInvader Жыл бұрын
This is Allan Cozby, notorious psychopath of Auberry
@suzy2anyone Жыл бұрын
🌈Gorgeous 💙💚❤️ thanx guys
@suzy2anyone Жыл бұрын
🌈Merry Christmas beautiful 🎅🎄stay warm ⛄ ✨
@RIISCHANEL Жыл бұрын
I like Grass Valey Empire Mine
@TheHypnotstCollector Жыл бұрын
I should have recorded there 3D wire model of the mine. The mine is Huge, like 5 sq mi and over a mile deep?
@TheHypnotstCollector Жыл бұрын
minute 2:00 announcer says "you ever sit in one of these? Steering wheel is in your lap." So true and it's big too and the pedals are Way far away.... but it looks great
@TheMindInvader Жыл бұрын
the tongue between the teeth and the fangs, near the end, are a nice touch. I'll have to put me on my channel
@TheMindInvader Жыл бұрын
Sometimes you forget, it's good to record.
@TheMindInvader Жыл бұрын
ALL of this burned in the 2020 fire.
@TheMindInvader Жыл бұрын
lovely Latte moment especially with Cheshire stretched out on the rug
@IExposeMormonism Жыл бұрын
YeeHaa
@TheHypnotstCollector Жыл бұрын
whoops, the last clip belongs with the opening shot.....
@TheHypnotstCollector 2 жыл бұрын
He looks black but he is all white with the tips of the hair turning black upon reaching full length. He knows english:: I told him I wanted a rat in the roof removed.... He brought me 3 rats over a week and one was the bad rat. Another time Purr Purr cat didn't come home, I told him we needed to find Purr. We walked around..... After a bit I wanted to leave but He wouldn't come home. I returned 15 minutes later and he was still there....With Purr. Then we all walked home together
@vincetboltusa4917 2 жыл бұрын
DUDE RIPPS !!
@TheHypnotstCollector 2 жыл бұрын
he does rip, but doesn't race very often. and he gets "arm pump" issues after 20 min or so. Since he was 12. he just changed his channel, david_darsey. it was racer715
@speaklifegardenhomesteadpe8783 2 жыл бұрын
Beautiful home. Not sure what to think about all the burning. Planned obsolescence? Kinda like they want for us too, huh. God bless and keep you 🌼😊👍🌼
@TheHypnotstCollector 2 жыл бұрын
I lived in the Santa Cruz mtns for 30+ years, until 2000 and the Sierra for 20+ years and I've wached it all burn:: At Loma Prieta end, at Big Basin into Last Chance Road, the Entire San Joaquin river drainage, some of it twice! and behind us now, the grizzly flat fire, burned all the way to Tahoe. Oh, and the Paradise fire, we didn't lose our home. But we sold it, it was a second home. Millions of acres. And I look at most of it as arson by bureaucracy and control burns. I'm really pissed. I have a bunch of tv channels i watch in Az, Ut, Co and that place is lit up like a torch all the time. And I have opinions of what the fire men did at the Superior Fire in Colo with a 1000 homes gone:: ON VIDEO the firemen drove away from the 12 Tribes shed burning with the burning brightly. No one asks why, who ordered them, where did they go. And so on.
@speaklifegardenhomesteadpe8783 2 жыл бұрын
Oh my gosh I saw this six years to late. WOAH.
@ashercohen387 2 жыл бұрын
Bill Binney, Phil Haney, bodies continue to stack up. Phil Haney did not kill himself. You are a Hero Phil for exposing Obama and his catastrophic swap out for Communists of The DHS.
@TheHypnotstCollector 2 жыл бұрын
Yes, his death is odd. The scene had No tire tracks, no indication that anything had happened there. He and his family name have been in this area 'forever", since c.1860's? It made little news out here.