I love it

Would you still recommend it?

Nice!

You like like that bam mangera guy Hahahha your voice hahahaha he did turn out awesome “hellooooo my annnngeeeelllll”

Your excitement is so wholesome I love you came out great

1kg spools? Nah 1t spools

Poo is supposed to come out the back

I'm loving my SV08 with the excellent @Microswiss FlowTech hotend. I print functional parts, similar to what is shown in the video. I'm more interested in layer adhesion so I don't print super fast, but the 400 mm/s in the video isn't the top end for the SV08. That's probably a good print speed for PLA and a 0.4 mm nozzle. With Rapid PLA+ you should be able to print at 600 mm/s and still have good print results on a part with long straight tool paths like this. Kudos to the Voron 2.4 designers and the Sovol engineers who adapted it to make the SV08.

I wish i could afford a 3d printer.

That's red😂

Pretty sure that’s microfibre polymer conduit. It has multiple pipes inside a casing. Directional drills use identical reels for their a frames so they can pull multiple lines in one shot

Bro I also want to learn about 3d printing where should I start

I NEED this for my P1S

I've heard it's hard to tune the purge hopefully you get it

Are you on your phone, brotherman?

Lmao 🤣 poopies monster quite litterally

I installed the @MicroSwiss FlowTech hot end when I was assembling my SV08, so I never used the stock Sovol hot end and nozzle. I love that I now have the choice of several types of very high quality nozzles, all in 0.4, 0.6, 0.8 and 1.0 mm orifice, that I can cold swap in one minute with nothing but a 7 mm nut driver. From what I've read, the Sovol hot end and nozzle prints fine but they don't have hardened nozzles yet, the standard MicroSwiss nozzle prints a little faster and the CHT nozzle is much faster (35 mm^3/s instead of 25 for 0.4 mm nozzle printing standard PLA). Being able to share excellent quality nozzles between printers, including future printers, is excellent. I'm now a MicroSwiss fan boy. :-)

the snort sent me hahaha

I may have heard wrong but I think he said it was a snake guys

Nice! I'm loving mine and I just installed the 0.4mm CHT FlowTech and its insane lol

that looks so gross 😂

He’s so cute what 😭 I love it so much HAPPY NEW YEAR

funny

I think you have to sand down all the non working parts

Very cool print!

Lee!

Do you recommend any specific profiles for tpu? Just got my p1p last night and am running into stringy prints

I keep getting an error to load external spool however I have an AMS. Before this, I was getting a filament mismatch error. I have been using Sunlu filament. Any suggestions?

Thank you, i happened to run across this filament, and the Amazon listing is so.... so... so generic i didn't believe it. Year later you're still helping people.

That is awesome. How long did it take?

hmm, that actually printed really poorly, it should spin freely straight off the bed, much like my gif or youtube short. Maybe this is just to be expected from "high speed PETG"? i haven't tried any PETG, but I printed loads of them in different PLAs. I have seen many comments of people having success with PETG on my other spinners tho, perhaps you need to recalibrate? I have found my A1 specifically to be a bit weird sometimes and needs calibrating way more often than my mini or X1C

Awesome Lee!

where can i get the file

That looks so sick!!

Sorry for my ignorance, but what is the tool? Are they chucks because all the prints are the same diameter

we need the link

Could you please share the files? I REALLY like them.

I trash 2 original sovol hotends doing test with petg now i buy one of this. Many thx.

*koolio*

Nice I really despise people who show off their stuff and don’t share anything or show anything selfishly

😂😂😂

Itd be cool of you proportionally edited info on the label, volume, calories, etc

What size matt has that been cut out on

3d printed one myself but i made it big so it took 7 hours 19 minutes and 2 seconds to finish and uhh its real heavy

sunlu 250G spools too small for ams lite?

Coat can

Dun-dun... Dun-dun... 😊

That’s so cool 🎉

Any chance you'd be willing to share the .STL files?

A tutorial in fusion 360 on this would be amazing or even a set of tutorial videos