Just got myself an original left-hand drive VX trim 1997 Prado with 117,000kms original mileage. I'm gonna build it the same as what did to this fine example. Thanks for the inspiration.
@dominiquehall-deal801210 күн бұрын
What dobinson leaf springs did you use?
@bobbynix96517 күн бұрын
What's the cost for that set in bronze? 4 wheels with tires, with new lug nuts
@zachc568729 күн бұрын
Do you know if this OBW has a suspension lift?
@ernestoescamillajr5122Ай бұрын
This is my favorite modification so far! I’m doing this on my Titan!
@RepuBlicOfChaD22 күн бұрын
If you do it. Get the shocks and struts kit. The puck lift alone is a horrible ride! I did the puck lift but upgraded the RC shocks and struts later down the road due to necessity.
@JerryC25Ай бұрын
My baby ❤️
@CaptSpenceАй бұрын
Nice!! What’s the offset on the wheels?
@4WhopperАй бұрын
When in the US?
@chesneyredmond6653Ай бұрын
Thanks guys! I followed these exact steps however I made sure to put my LX on flat ground and adjusted the rear ACH adjusters to the lowest setting to get a more leveled look. And then I measured all the distances from top of tire to fender and noticed that passenger front was 0.5in higher than drivers side and same in the rear so then I adjusted those sensors down a little more so it was perfect side to side then followed these steps. We will see how the ride does. Honestly I am sick of the car adjusting while I am driving and the front being 2in lower than rear.
@eronibarra5499Ай бұрын
What's the biggest tire you can put on a 2021 titan xd pro4x? without having to remove mud flaps and no trimming. Using 1.5 wheel spacers on oem 18" wheels.
@reneulloa2437Ай бұрын
What is the actual size of rc spacer ? They say the pro4x comes 1inch taller from factory and they dont recommend more than 3 inch lift so is the spacer 2inches?
@mikemesaful2 ай бұрын
No rubbing with 265/70?
@rhoodj2 ай бұрын
I have Recon Grappler 33.5x12.5x17 with ICON brown rims.❤🤜🤛🤝🤝
@rhoodj2 ай бұрын
Is the AHC option still operational?
@richstevens2962 ай бұрын
Did you have to cut the wheel studs to make the 1.5 spacers work? How are the cv angles with this kit? do they use a diff drop kit? Thanks
@shootdonttalk9500Ай бұрын
boots will rip after 60k miles
@dee1512 ай бұрын
How do you like quick ride option? Looking at MRR kit with quick ride
@campbowie222 ай бұрын
I wonder.... I have 285/70/17s in there now. My 3' radflo remote resevoir lift is going on in a few weeks. I had neutral trd wheels with a flush mount I wonder If I can slap 305s on there without any crazy mods I have the same 2017 gx
@MohammedAladi-i9w2 ай бұрын
Every time i make it in a HI mode and disconnect the comp it drops down instantly, any suggestions? Please need your support
@dadbodonfleek95012 ай бұрын
Do you think a 4 inch lift would look good with those same tires?
@Dirty6ixThirty_VP2 ай бұрын
No too high
@justinduenas50352 ай бұрын
I just did the sensor lift but did not poll put the pin in rear driver side, so the AHC system can still operate. The ride was very compromised with it stuck in high position. My question is, will these tires and offset fit with the sensor adjustments ONLY at the "Neutral" height ? or does it need to be stuck in "High" for no rubbing?
@neilsimmons79503 ай бұрын
Love this. Thanks
@rallyredevo3 ай бұрын
Hey buddy great work you guys do, BTW what offset are the wheels, thank you in advance.
@Gtyu-m9q3 ай бұрын
Is this 35 inch tire or 37? Btw this Lexus is absolutely stunning, great choice on the color🔥👌
@rhoodj2 ай бұрын
I love it. I am lucky to get one, ready to go @ a Mercedes Benz dealer in Orlando, Florida. With ICON brown rims and NITTO Recon Grappler 33.5x12.5x17 Tires. The AHC is still functional, lifting about 5-6 inches high.😅❤❤👍🏽🦾
@edgarAce3 ай бұрын
The tent is on point 🔥🔥
@manoloprpr3 ай бұрын
Step Delete and chin trim next?
@jvroulis14 ай бұрын
This is literally the worst idea ever just lift the vehicle properly 😂😂
@corwininadsm4 ай бұрын
WOW that music is annoying
@boomersooner96004 ай бұрын
With a little trimming you can run 285’s and they fit nicely.
@YourSoulFriend2534 ай бұрын
Beautiful view before it gets dirty
@WheresRonaallldo4 ай бұрын
will this kit fit PRO 4x? I've been looking at some kits where rough country's website said it wont fit but other sites will say it does fit? what are the differences between the trims as far as suspension compatibility? are the parts interchangeable?
@sammyjones35004 ай бұрын
love my 97 prado, 3.4 petrol is super reliable,
@LiterallyOverTheHillAdventures5 ай бұрын
Any idea on its wet weight?
@Cosaneo5 ай бұрын
are these wheels in 0 or -10 offset?
@davef59165 ай бұрын
i just got a JDM kzj90 SWB. I was looking at the forerunner roof racks, but I found them kinda goofy because theyre super high off the roof to account for the factory bars that came with some of them. Do you think it's possible to lower them at all? Or is the height ok do you think?
@Adam_K_W5 ай бұрын
When you say "Cab Mount Relocation" are you saying you completely cut the body mount off up front and moved it elsewhere? What does the bolt go into to mount the cab at that point?
@lawrencesayoc74595 ай бұрын
This is the perfect size and set up wheel and tire but it will run and you will need to do some very minor things like I did. Heat guns be zip ties that’s all no cutting.
@4bvenom7336 ай бұрын
Great taste
@427saleh6 ай бұрын
What is the hight from the lower wheel rim to the fender ?? Cus i have the same settings from dobinsons and still 78 cm only
@denisaunga2546 ай бұрын
Wow, this is so cool. I've fallen in love with Prado j95. I must buy one soon.
@714integra6 ай бұрын
This looks awesome!
@harizummer32336 ай бұрын
😊In lexus is their centre and rear differential lock.
@vipraz1196 ай бұрын
Where yall able to fit that same size wheel/tire as a spare?
@dbronco20326 ай бұрын
50k!!! Stay down under ARB Earth… whatever
@SSA0M6 ай бұрын
It looks great
@mojorizn726 ай бұрын
Nice truck. But, you can pound that fucking music in your ass! Why the fuck would you put that annoying shit in the video? Seriously!
@krisarrcha59147 ай бұрын
That’s 3” of lift?
@richmatyiku54457 ай бұрын
Is that the gloss titanium color?
@turtlerico7 ай бұрын
Looks awesome!!
@Amakye-Acheampong-Yeboah7 ай бұрын
Are those 33s or 35s???
@DaveyJordan7 ай бұрын
I highly advise against locking the truck in high permanently. When I showed how to do that it was to show how the systems works and how the network ECU checks for other modules on the Canbus and what happens if it doesn’t see the AHC module. This is something that, as I mentioned in my video, in actual practice wouldn’t make sense for day to day use. You are going to have a stiff ride and lose all the handling and responsive benefits of AHC.
@chameofrierson76285 ай бұрын
You making too much Sense my brother :) These LX570 builds are for the lazy mall crawler types. He has no idea he just gave himself an awful ride lol.