Please, how can I replace the battery?

Danke gut information

I really like mine , tips are a bit expensive but it's worth it's weight in gold

send it to big clive

Is it an 18650 battery in this trimmer? Mine isn't holding much of a charge any more and I need to replace it.

L'unica parte che interessa ( come aprire!!) non c'è!!!

E2 what typ of error is this?

Very interesting and genius!! Are they strong to open tv frame? Thanks ❤

Did anyone else succeed getting the rotating cover separated from the inner housing? Its locked in place. I'm pulling on it with all my strength and it does not budge. I need pointers for this magic move. TY

You have show how the big black part comes out

i dont understand how do you remove the body... jesus christ, i cant remove it... im going to break this thing to the wall...

No problem thanks

To nejdůležitější, jak sundat kryt neukázal. Chtěl jsem se dostat k baterce.

Thank you for putting this video out, as had to look on youtube on how to dismantle as have the same issue. Will dismantle tomorrow

What is this piece SMD U1?

What model of battery is inside? Do you have the specifications, besides 3.7V? The picture was not clear enough to read the markings. Thanks.

😘😍🥰💪🦾💪🙏🙏❤💚🖤💯

Дякую за відео. Найважче було зняти круглий корпус, але на відео не видно його кріплення. Батарейка 14500 3.7V 700mAh.

Next time you can make video in completely dark enviroment , because now i still can something to see

What operating voltage of this soldering Stations handle

I have the same cage as yours but only for my 1 pacific parrotlet and even then I think it’s still small. You have 2 budgies, they are slightly bigger than my bird, I would suggest you buy them a bigger cage. Like maybe M02 or L size from Vision but I agree with you that when we remove the tray we have to remove everything, it’s actually quite annoying haha 😅 I guess, I would suggest other brands than Vision as Vision quite heavy as well

im azizsaadi from morroco im nedes to intal mac ox x10.5 8 in my power g5 please helpe me sir

I've just seen this - thank you SO much for going to the time and trouble to do this for me :-D

The reason why I watched this was to see how to get the trimmer end back into the unit, and you didn't show that!

Thanks for sharing! I don't understand that these fake soldering stations are being taken back or there is a ban/penalty fine for the makers of these fake stuff. you can't and shouldn't just (use the real brand/name/logo)??

Cool idea 👍

What soldering iron does this take?

Why is there only two connector slots on this tip even though four wires are going to the handpiece. I guess the side of the bit is earthing and two wires to the connectors but where is the fourth wire attached to?

How working with the VR?

You are a genius, with the due attention when using these metal tools, for sure I can open my laptop without destroying the plastic clip. Thank you

can it open a tin of beans ?

MY OLYMPUS DP-11 WONT WORK IT TURNS ON BUT THE BUTTONS WHEN PRESSED WONT RESPOND DOES ANY ONE KNOW A REPAIR I HAD IT STORED FOR 5 MONTHS THEN FOUND IT USED IT AFTER 5 MONTHS ON NON USE NOW IT JUST STUCK HELP ANYONE KNOW WHAT I COULD DO REALY LOVE THE CORDER DP-11

Hi! Could you please share what is the focal length and the magnification ratio? They should be written on the lens you have there (if you still do). That should help understanding what lens to choose acording with what camera we use (I only have webcams, for example). Thank you very much for the video though!

Where did you get the tip?

If you think you are going to get a genuine Hakko soldering station from AliExpress then you are sadly mistaken

Well i ended up finding it.but good luck ever buying one. Pro Elec HT8095LED

I've googled for the past hour and I can't find the lamp.closest is the 12 Diopter LED Magnifying Lamp by Omano but I dont believe it will be large enough for something like this. Dang samtec why couldn't you have listed who made the lamp..

Whats the make and model on the magnification lamp?

This solder station is not very accurate temp is off over 100 degrees

Mine is about 8 years old and still going strong! Only things I would change is the bottom dust filter coming out the front instead of back and a back plane for hot swap drives.

Anyone know if the handpieces still available anywhere? Someone is selling the base units for very cheap on eBay buys it's no good if I can't get a hand piece.

To remove my battery in an acer aspire E laptop it says i need a #3 spudger. Am i supposed to run it around the edge of the battery cover to remove the battery to replace it? There is a tiny circle under battery cover on right hand side & it has an indentation & a small battery pic. I think im supposed to press a flat head spudger or pencil in there to release battery but im not sure. Iv never heard the term spudger before. Does anyone know if its safe if i use a pen or hairpin or should i take it to a computer shop? I dont have much money & last time i took it to Murwillumbah NSW pc computer shop the owner tried to tell me it was too old & (its 5 years old) to just give it away to him & BUY A NEW ONE LOL - i dont have much spare money & im wondering why the battery isnt charging.. Any advice would be superb! Thanks for reading this & hope someone might know how to help me get battery out.

Ok so I’ve got a question about trying to install OS X 10.5 on an iMac G5 Heres what I have available -The G5 of course -A 2008 white MacBook that can run leopard (intel core 2 duo) -The MacBooks original install DVD’s -a 16GB flash drive -a 120GB HDD (and a USB SATA adapter) -a downloaded DMG of 10.5.8 Here’s what I’ve tried 1. I originally tried to install via USB using the flash driver and a DMG. I’ve looked at every KZbin tutorial there is and every post, nothing, the USB doesn’t show in the G5, no matter what i try 2. Install using the DVD, which doesn’t work because they’re for the MacBook and only the MacBook 3 I tried to modify the discs to support my mac using “the 8 bit guy” KZbin tutorial (that is very old now) but this (I guess) no longer works 4. Install to the 120GB HDD using the DVD from the MacBook (but it can ONLY do so if the HDD is GUID MAP not Apple Boot, the G5 can’t read a GUID partition MAP Has anyone got any idea how to get 10.5 on the G5 :( I’m stuck with 10.3 until I can get this sorted and 10.3 is just too old to support web browsing now ANY SUGGESTIONS !!!

I OWN THIS AUDIO RECORDER ONE PROBLEM THE PLAY STOP AND RECORD BUTTON DOES NT WORK WHEN PRESSED WHY WELL APPARENTLY IF YOU LEAVE THIS RECORDER SITTING ON THE SHELF FOR ONE YEAR WITHOUT USING IT CONDENSATION BUILDS A THIN CRUST OF RUST INSIDE THE BUTTONS DAM IT NOW I GOT TO OPEN THE CASING TO REPAIR IT SOMEHOW GOT TO SCRAPE THE RUST OFF THE CONTACTS INSIDE THE PRESS BUTTONS SCREW DRIVER REQUIRED LOL

hi there i need help regarging bios of exact same hp model . reply if you can help, thanks

hi there i need help regarging bios of exact same hp model . reply if you can help, thanks

Can you browse with full version of Firefox or Chrome? Mine won't.

What is the latest version of Mac OS that can run on this G5? Thanks

I think the lens came from the Telesensory Aladdin Low vision magnifier machine. The lens possibly is a 400mm ~ 500mm focal length zoom lens with a magnifier glass in the front. It was adapted to a CCTV camera with a lens adapter. C-mount ? maybe this one will help.. www.instructables.com/id/Ultra-zoom-Macro-for-a-Few-Bucks-DIY-High-Resoluti/

not so much a how-to as much as it is an example of the tools you've made, and how they are used. thanks!