Yes, the process should be essentially the exact same
@creamsdestinedfuture8 күн бұрын
also whats that steering wheel? looks boaty. if they make that in black i need it
@RealSupernauto8 күн бұрын
Nardi Gara 4
@creamsdestinedfuture8 күн бұрын
i have the same exact bluetooth fm adapter, that thing is the only one ive tried that works like a charm, two ports w charg n one fast charging, and its shows ur battery volts when ignition on :)
@RealSupernauto8 күн бұрын
I’ve had no issues with it. It works great! 😊
@muskratwiser47009 күн бұрын
Bmw!!??
@RealSupernauto9 күн бұрын
E34 😎
@Mrgotdammit359 күн бұрын
He a real one for that
@RealSupernauto9 күн бұрын
💯
@LaZerMouse11 күн бұрын
Awesome video. U make it look easy. Thank you
@RealSupernauto10 күн бұрын
You’re welcome!
@Lxst2Dope13 күн бұрын
Nice video, was thinking the channel is alr. bigger
@RealSupernauto12 күн бұрын
Thank you 🙏🏽
@liqueunique2013 күн бұрын
Wow 😮
@RealSupernauto13 күн бұрын
😎
@jeraydriv3r58013 күн бұрын
I have a question, e38 1995 m60 6speed getrag 420- is there double mass flywheel??
@RealSupernauto13 күн бұрын
In stock form, yes. You will have a dual mass flywheel unless it’s been converted at some point in its lifetime.
@Michaelhits115 күн бұрын
Brake ass lol cars telling you the brakes are ass
@FrostTheGlaceon16 күн бұрын
if all else fails i hear electrical tape works great for getting rid of bmw warning lights!!
@RealSupernauto16 күн бұрын
💯%
@pixelfish_17 күн бұрын
just buy a bmw obd
@RealSupernauto17 күн бұрын
No tool can communicate when there’s an active communication issue
@loco7812918 күн бұрын
The problem is....... a BMW
@RealSupernauto18 күн бұрын
True 😂
@DB-xt8ii18 күн бұрын
@@loco78129 25 years working on those, I can confirm. Had to walk away at the twin turbo v8.
@John420Dirt18 күн бұрын
Best spark plugs got a lot of oil on it for being one month old
@RealSupernauto18 күн бұрын
That was the old one
@williamklucznik215318 күн бұрын
You forgot crank shaft sensor and timing gearing the magnetics half to line up
@RealSupernauto18 күн бұрын
Ok buddy
@DB-xt8ii18 күн бұрын
I will say though, that is the proper way to diagnose the issue. You can also VERY CAREFULLY leave the coil loose and lift it away from the spark plug to identify coils with weak output.
@RealSupernauto18 күн бұрын
Yes, but you run the risk of getting shocked doing this ⚡️
@DB-xt8ii18 күн бұрын
@@RealSupernauto hence the term very carefully. 25 years working on those motors, never shocked once. I would say simply swapping in known good coils, but those can hard to come by in a home environment.
@DB-xt8ii18 күн бұрын
Your misfire may also be due to the oil that's coating those spark plugs and coil ends. Time for a valve cover gasket there.
@RealSupernauto18 күн бұрын
That was the old plug, VCG was changed at the same time.
@Cam_kam20 күн бұрын
You must not know how to crimp or much about electrical. Any jackass who says you cant tug on a crimp connector needs to GET THE HELL OFF MY JOB SITE BOY. Iykyk.
@arpc002722 күн бұрын
The biggest problem? Buying a Porsche.
@RealSupernauto22 күн бұрын
😂
@DreadlordLopez22 күн бұрын
You’re the worst KZbinr I think I’ve ever seen in this mechanics
@alhot1122 күн бұрын
Great inspection!! That dye showing where the leak is is saving people a lot of money 💰 !!
@RealSupernauto22 күн бұрын
For sure! Dye is great when it works!
@MR_Mazza23 күн бұрын
Very good friend, thanks for this video. I wanted to ask you a question, do you think it is possible to lower the climate control and put it behind the gear lever? The cables will reach that position. Thank you very much again
@RealSupernauto23 күн бұрын
Anything is possible with enough time and patience!
@ClavinZKL25 күн бұрын
Just a questiok did u put weight to the car cause it didint seem like the normal resting stance 😅
@RealSupernauto25 күн бұрын
I didn’t add weights to the car, but ideally the car should be fully loaded as well. There’s only so much room for info in short videos like this. I actually compensated by loading the suspension slightly past the marks made to simulate a fully weighted car.
@makeitup309325 күн бұрын
Of course we knew it
@RealSupernauto25 күн бұрын
Glad you did
@98ek925 күн бұрын
Bet you i did know this.
@RealSupernauto25 күн бұрын
Awesome! Pass on the knowledge 👍🏽
@chris10319325 күн бұрын
I always wondered how you tightened it with the car loaded, good trick to know as a backyard mechanic thank you
@RealSupernauto25 күн бұрын
No problem 👍
@OGNISTYSZKQAJDII25 күн бұрын
just saying not the case for all bushings if you ever got modified truck or car you may encounter poly pushings or spherical bushings in case of pollybushings it depends on the design in case of spherical bushing it doesnt matter in what position you torque
@RealSupernauto25 күн бұрын
For sure, every car is different. This is a very general concept
@OGNISTYSZKQAJDII24 күн бұрын
@@RealSupernauto for sure, generally if you torque suspension loaded any bushings it will be fine just for some cases no need lower and jack the car up again saves some time
@nicholascheek779025 күн бұрын
If you don't know this you shouldn't be working on cars
@RealSupernauto25 күн бұрын
💯
@Cragified26 күн бұрын
If you don't do it the right way you'll also destroy the bushings quickly because the rubber or whatever used to isolate will be under constant torsion. And then you will be right back to clunk clunky.
@RealSupernauto26 күн бұрын
@@Cragified exactly!
@jamespainter318426 күн бұрын
If you torque the suspension the proper way it will ride way better then if torqued improperly
@RealSupernauto26 күн бұрын
💯%
@tack341125 күн бұрын
SAY SWEAR!!???
@Hettdizzle26 күн бұрын
Love the paint marker trick, thanks!
@RealSupernauto26 күн бұрын
You bet! 👍🏽
@slowazzes197225 күн бұрын
Kinda pointless just lift the car by the control arms
@rayben397226 күн бұрын
Will putting a jack stand under the control arm and lowering the vehicle have the same results?
@Hettdizzle26 күн бұрын
It will get you closer than not doing it at all
@RealSupernauto26 күн бұрын
Essentially yes, but if your control arms are aluminum then I would not suggest that method. Aluminum control arms shouldn’t be used as jack/jack stand points since they are weaker than steel. It can also be hard to get a solid mount on the control arm since they are usually contoured. This is why I used the brake rotor to load the suspension on this car.
@Cragified26 күн бұрын
No because the vehicle will not be on an level plane. It will be closer.. but not correct.
@hargelm7031Ай бұрын
Well that was super helpful thank you
@RealSupernauto29 күн бұрын
You're welcome!
@greatkamalovАй бұрын
What do you use to clean up around the pan down therer?
@RealSupernautoАй бұрын
Brake cleaner. You can find it at any parts store.
@greatkamalovАй бұрын
Can you tell me where the red touch and the black touch? And where the switch voltmeter pointing please?
@RealSupernautoАй бұрын
@@greatkamalov this depends on what you’re trying to check. Please watch the video again if you are trying to check voltage. If you need further help, send me a PM on Instagram and we can arrange a meeting.
@jose1414ifyАй бұрын
What were the torque specs for the tie rod, upper ball joint, lower ball joint & axle nut?
@RealSupernautoАй бұрын
Tie rod to knuckle: 44 ft lbs Upper ball joint: 37 ft lbs Lower ball joint (w/ captured washer): 92 ft lbs Lower ball joint (w/o captured washer): 37 ft lbs + 130 degrees
@meguinness1116Ай бұрын
which AC Hose Adapter Fitting Connector will fit a e39 bmw PORTS ? ta
@RealSupernautoАй бұрын
E39 has standard R134a ports
@lezrickАй бұрын
like the clip but i have a ?4u after the car 46 is running and i turn off the motor i here a rattle and i was told that its the motor mount
@RealSupernautoАй бұрын
Could be!
@slightlypermafried2 ай бұрын
This is great, mine just stopped working and will have to look into this. Feels like I'm watching something I would do fixing little things for free, same tools, stabbing hole in ultra grey rtv lol
@RealSupernauto2 ай бұрын
Free fixes are the best 😂
@TallerAlmarvilCuliacan2 ай бұрын
Ojalá puedas responder, realize el mismo servicio pero sigo con problemas por qué la bomba de gasolina no quiere encender que me aconseja
@RealSupernauto2 ай бұрын
@@TallerAlmarvilCuliacan if your fuel pump is not turning on, this would be unrelated to this service. If you would like to schedule an appointment for a diagnostic assessment, please message me on Instagram.
@Brandolorian892 ай бұрын
I like both of them. Have you ever gone dirt biking on a course?
@RealSupernauto2 ай бұрын
They’re both great bikes. Never been on a track, don’t really plan to 🤷🏽♂️
@Brandolorian892 ай бұрын
Really cool vid. How are you liking the bike?
@RealSupernauto2 ай бұрын
Loving the bike, it does everything I ask it to 😎
@TheAzimthedream2 ай бұрын
Nice vid !!
@RealSupernauto2 ай бұрын
Thank you! 🙏🏽
@Stompychann3 ай бұрын
First time ive seen a h53 car on the track. Thank you for sharing! Tempted to get mine out there but probably won’t lol. Such an amazing car!
@RealSupernauto3 ай бұрын
I would highly recommend trying it!
@KenCashMoney3 ай бұрын
Hey like the work put in, Florida heat is no joke
@RealSupernauto3 ай бұрын
For sure 👍🏽
@bayerbear67703 ай бұрын
Who gives an F
@RealSupernauto3 ай бұрын
Good question 🤔
@roh41l_vfx3 ай бұрын
I do
@RealSupernauto3 ай бұрын
@roh41l_vfx 🙌🏽
@SoloRiderJoe3 ай бұрын
Nice!
@RealSupernauto3 ай бұрын
🙌🏽
@Babatunde-se8kw4 ай бұрын
are you eventually going to go extreme with the track build ?
@RealSupernauto4 ай бұрын
Probably not. I still use this car as a commuter occasionally!