it depends of what you are comparing, diameter is around 120mm .

Yes that's how I wanted it to be because it's a bit of a pane to make G codes for just one part.

Nope , They are both left handed.

@@cytron8787 yes both left handed. Actually, better way of asking the question. When it comes to disassembly, after you've removed one nut, how would you remove the other nut? The remaining nut would turn the axle - how would you keep the axle still to undo the remaining nut?

@@author722 I remove the first nut , after that I remove the shaft then holding it on the lathe chuck so I can remove the other one what ever come first , usually the front one because the nut at the turbine side it's getting hot and then it stacks a bit more than the front one 🙂.

@@cytron8787 got it, understood. Thanks bud, cheers

I am sorry I don't have them available for now maybe some time will be.

That's correct, but is a bit difficult to find Inconel , and on plus on top of that I have no experience on machining Inconel , from what I know from interned it's a nightmare to deal with. 🤐🤐🤐

Thank you man.

3 axes plus one manual

Έλληνας απόγονος Σωκράτη Πλάτωνα Αριστοτέλη 🙂. Φίλε εχει κερο να ασχοληθώ με τζετ. Επίσης δεν εχω χρόνο. Αν θέλεις κατι πεστο εδώ, αν ειναι εύκολο θα απαντήσω, ευχαριστώ.

@@cytron8787 Αρχηγέ ευχαριστώ! Θα σε ρωτήσω εδώ αν χρειαστώ κάτι.

@@cytron8787από που προμηθεύτηκες τις ράβδους για τον άξονα και για τα αλλά μέρη του κινητήρα (inconel)?

Thank you

No, unfortunately not.

it is a K-type thermocouple , most multimeters have the capability to read them.

I want too

I mean thrust angle please thank you

I think it's around 25 - 30 degrees at the exit, in general too steep angle its good for turbo shaft not for thrust , also makes the engine start easier , but the compressor may stall or surge too early, the opposite happens if it's too shallow, the engine have more thrust it runs hotter and it's harder to start. One good way to understand this is to imagine that every gap between the blades it is a thrust nozzle, smaller gap = more thrust(meaning more thrust to rotate the shaft not move the engine forward) - but it's harder too push air into , opposite happens wen the gap is big.

@@cytron8787 Thank you for the information I learn something from you it's more than I expected appreciate that .

it's a cnc , I indexing manually though.

it wouldn't fit, I guess🙂

There still some area

May I contact you through mail please? 😊

@@yousefashry2897 send me message if you want .

Thank you. You want the name of the machine that cuts the metal?

@@cytron8787 yes and the name of this process please

It is 72mm 6x6 blades, don't know the brand , a friend of mine gave it to me.

@@cytron8787 ok, I'm looking for it but can't find one that suíts the engine

Thank you! , diameter if I remember correct is around 70mm, I didn't measure the rpm, but from calculations must be around 120k.

@@cytron8787 Maybe you could help me. I am trying to repair a simjet 700 which is missing the combustion chamber. It's been three combustion chambers that I try to design... but this one works very badly. My compressor air inlet is 33mm and the turbine wheel 45mm. For a 75mm housing. What is the diameter of your air inlet on your engine? Maybe your combustion chamber could work on my engine. Would you mind sharing the plans.

@@nicolasm7012 Are you sure that is a combustion chamber problem? Any way if want help contact at my email.

around a bar, it is too small.

For test I use propane, but it depens on the design, some micro turbo jets can't even start with propane .

Hi, the combustion chamber is the same as kj66, you can find drowings on the internet if you search a bit.

I must thank you for the support.🙂

@@cytron8787 for what it's worth, I'm streight however I have Jesus in my heart and I really love people and I'm a tender hearted person. People are so very important to me I like people.

@@cytron8787 if you need me to look up flight simulator cockpits with pokeys57E I can but you can find them. Making it fly a plane online with cameras is sweet. Id work with you on it we can contact the pro's and ask for help to do it. If you need anything I can mail you things I have left over from upgrades

@@cytron8787 kzbin.info/www/bejne/jmKYgaang5V3fsU tell me if you like this

@@cytron8787 I wonder what the exchange rate is for US dollars to your money. I wonder if I can send you something in the mail. You should do a personal testimony of what your life is like and talk about your life. I fell to drinking beer because of the stress I've been going through lately and I feel pretty badly. Maybe next month when I get more cash then I can buy you something or send you $20 just to say thanks for being such a great person. You deserve it for making those videos. I don't have a lot of money but I'm sure I could at least send you something. Patrion is some kind of thing to do that I think. If I was rich I'd help people like you all over the world. I feel bad for people who struggle to succeed. You should be rich with your skills. Definitely!