WyrTap

Пікірлер

@suprman1971 22 сағат бұрын

Thanks for showing i have my manual but it's still good to know info

@selectorerwin1don12 22 күн бұрын

Best video well demonstrated thanks 🙏

@Ytslimeofficial Ай бұрын

I think we’re all here because we thought we knew what we were doing …

@davekincaid6729 Ай бұрын

Do you have another video of you installing the new Jack onto the press?

@wyrtap5138 Ай бұрын

@davekincaid6729 I don't believe so but honestly I record a lot of stuff that doesn't make it to yt so I will look. If not I could do one and show what I had to do.

@Thick_Burger Ай бұрын

Thanks 👍

@ShaunMurphyBand Ай бұрын

Thank you!!!!

@ricardoberrocal3358 2 ай бұрын

Thanks for teaching how to open the case, you saved my day.

@ishmaelsampedro7020 2 ай бұрын

What type of batteries did you use???

@wyrtap5138 2 ай бұрын

@@ishmaelsampedro7020 harbor freight brand AA

@chocotoynk2931 3 ай бұрын

Will this work on cv axle to easily pull it out from transmission?

@wyrtap5138 3 ай бұрын

@chocotoynk2931 possibly, I've never tried. If you are able to get one of the attachments to stay on it should work.

@pyropeople 3 ай бұрын

Does this apply to ac, as in 3 phase motors?

@wyrtap5138 3 ай бұрын

@@pyropeople yes it would

@davecrupel2817 3 ай бұрын

Applying a load on it is the same thing as applying brakes to it. There's a reason it's called a *load.* And these "freespin" idiots cant wrap their head around that.

@donwright3427 3 ай бұрын

Flux reluctance

@JUHEBLA1776 4 ай бұрын

Thanks I really didn’t need the help but I wanted to set it so bc I’m making a video of shooting it and wanted to see if the key or the code will still work

@Dimomult 3 ай бұрын

Well, does it still work ? What did you shoot it with and how many times?

@Dimomult 3 ай бұрын

Also, this is hands down the best comment on this video.

@JUHEBLA1776 3 ай бұрын

@@Dimomult kzbin.info/www/bejne/maWWkIZrd8Z4aLcsi=vbFGOEfKksXYO17B

@hakimsmith1489 4 ай бұрын

How do you factory reset this camera?

@wyrtap5138 4 ай бұрын

I will see if i can find some info. Been some time now.

@Uiyhin 5 ай бұрын

👍

@Predictbauer 5 ай бұрын

Great video. Purchasing one today for my interlocking brick press.

@grilledchickenwrap 5 ай бұрын

what would you get if you have the Negative in middle (drain) and positive on the left pin (gate)??

@frankdatank7751 6 ай бұрын

Will this work on axle bearings thanks!!!

@wyrtap5138 3 ай бұрын

Yes

@CalvinHanna-k8p 6 ай бұрын

How do u set a Code on the keypad on the 0.17 Cube Feet

@ChristopherGoshgarian 6 ай бұрын

Just bought one in 2023 and I love it so far and I’ve been telling a lot of people about it and it is such a good product

@ZURIROBLES-bx8qo 7 ай бұрын

Worked perfectly thank you 🎉🎉🎉

@andrewday497 7 ай бұрын

It never said there's a button inside!!

@jeffbrinley5443 7 ай бұрын

Thank you!

@jonatanmartinez2376 7 ай бұрын

Thanks Bro, for your video 😊. Good job

@gaynzz6841 7 ай бұрын

this thing doesn't work at all. i enter height 1 = 0 (bottom), height 2 = 30cm, turns 1250, wire dia 0,2 and it tells me the turns dont fit. hilarious. and if i enter 0.02 DC resistance is wrong, wire length is wrong, everything is wrong.

@wyrtap5138 7 ай бұрын

It can be tricky and it has been a while for me so I apologize if i get this wrong but for height 1, if it's sitting on a table, height 1 will be the dimension to top of the table (32" for example). That's your build surface. If your winding area is 8" then height 2 will be 40". Use a caliper to measure the actually size of the wire. Actual diameter is different than awg due to enamel coating. Plus you will need to account for a tiny air gap between each winding. Sometimes it can get tripped up and it's just best to start over.

@Rollincoal17 7 ай бұрын

thanx really helped

@josemartinez-lj5oz 8 ай бұрын

That big washer don't go

@TolaTrucking 8 ай бұрын

Hello, I'm working on an power inverter the irf1404 mosfets have the Drain or the middle pins clipped off not connected to the cb ,Is it normal?

@wyrtap5138 8 ай бұрын

Not sure exactly what you mean but the middle pin is generally common to the back side.

@michaelvanbuskirk8845 8 ай бұрын

Does anyone know what the nut size is that holds the buffing pads on this buffer? I lost mine and need to replace them. The instructions say "M12" but it doesn't say the threads per inch.

@wyrtap5138 8 ай бұрын

Let me see what I can find out for you.

@michaelvanbuskirk8845 8 ай бұрын

@wyrtap5138 Thanks but I think I found out. Mine is the older #94393 item number so it takes 1/2"-12 nuts which is odd as most are 1/2"-13 at Home Depot and such. I had to order four from Amazon to get them. If I want to use the other side, which I don't need at the moment, I will need to order some 1/2"-12 left handed thread as well.

@wyrtap5138 8 ай бұрын

@michaelvanbuskirk8845 good deal. Thanks for adding that info. Some other folks might be able to use it.

@michaelvanbuskirk8845 8 ай бұрын

@@wyrtap5138 Hope it helps someone.

@123demaio 9 ай бұрын

❤

@trewatkins530 9 ай бұрын

Sikkkkkk

@AVBNOW23 9 ай бұрын

Thank you

@katwin659 10 ай бұрын

Thank you! Works on 62978.

@Cardinalfloors 10 ай бұрын

Can you mute the sounds

@Dimomult 3 ай бұрын

You can de solder the speaker from the pcb, or motherboard if you know how to use a soldering iron.

@AbelAdames-r9n 10 ай бұрын

Gold digging is a hobby I neeeeeeeeeeeeeeeeeeed 😮stay thirsty God bless my wallet 🧱

@carlossalgado9627 10 ай бұрын

Thanks🎉

@jh5881 10 ай бұрын

Thank you ...i read manual poorly 😂

@jeremiah5454 10 ай бұрын

Can u make a vid of u disassembleing it

@wyrtap5138 10 ай бұрын

I don't have this bike anymore. Unfortunately, I had to sell it a few years ago.

@solarsynapse Жыл бұрын

I would need a lot of bulbs to handle 2200W. Suggestions?

@wyrtap5138 Жыл бұрын

haha thats pretty hefty but...might try 25 - 100w bulbs. go a little heavier so your bulbs are not being stressed. 25 bulbs (2500w) on 125v would be 20A. You would want 125% more on your breaker as well so i would go with a 30A circuit breaker with #10 wire. You could get by with a 25A breaker but i would still use # 10. could even try a variac so you can ramp up the voltage if your circuit would allow for it.

@solarsynapse 11 ай бұрын

@@wyrtap5138 2 1500W Nichrome wire heaters in parallel with each other then in series. Tungsten filament bulbs have a positive thermal coefficient (PTC) with low cold resistance so high in rush current. Nichrome wire/ribbon has a consistent resistance. Always learning.

@wyrtap5138 11 ай бұрын

@@solarsynapse as we should be! good job and thanks for the info!

@odiesclips7621 Жыл бұрын

I could almost stay awake watching this.....

@_noah143_4 Жыл бұрын

Thank you!!! Been trying to figure this out for awhile and never knew there was a button inside for the rest😂

@JoeHewlett-l6z Жыл бұрын

You didn’t show the work.🤨

@ryancarson4528 Жыл бұрын

It’s been 3 years did you ever fix that breaker popping background noise? I wouldn’t be able to sleep, just saying ❤️❤️❤️❤️

@wyrtap5138 8 ай бұрын

Sorry I didn't see this sooner lol. That is actually my powder coat oven I made. I built a timer circuit that pulls in a contactor for 30 seconds on and 20 seconds off. Not sure of exact timing I haven't used it in a while. Anyways, the timer is to keep the heat element from overheating since it is designed to have air blowing over it. No air circulation in the oven. The timer is a very efficient way to maintain the heat inside. I guess i got used to hearing it because sometimes it wouldn't even register that it is on while I'm recording something and people have pointed it out in other videos