Nah it’s powder coated, but it turns out paint stripper in Australia is stronger compared to other countries.
@mankihonda9833 ай бұрын
AT makes one that has double the MC content and its half the price of CRC.
@Letsmakesomething13 ай бұрын
Good to know, I’ll give it a try.
@vickysharma7545 ай бұрын
Is it possible to dry and reuse powder coating powder that has gotten wet from water accidentally falling on it?
@freyatilly6 ай бұрын
I used paint stripper for my powdercoated bike front fender. Hardly touched the surface. Was told that sandblasting or silicone ball blasting is more appropriate. 1) we didn't see the powdercoating process. Looks like regular spray paint. What was the process for that paint? 2) didnt see the paintstripper product name. 3) What was the liquide used to clean off residue? (Isopropyl?) Thanks
@AudieChason7 ай бұрын
Aloha. I see you are in Australia. Your paint remover must contain MEK which is now banned in Europe and the US. Paint strippers available in those countries will not strip powder coat. I’ve tried all of them and the tricks, like wrapping the item in plastic kitchen wrap. The only effective, but much more time consuming and complicated solution is to use either a paint strip disc on an angle grinder or burn it off with a touch, or a combination. I have a propane weed torch that works reasonably well but it takes awhile to sufficiently heat the part. Note, many commercial powder coaters use bake off ovens to remove old coatings.
@Letsmakesomething17 ай бұрын
That’s really bad, I’ve tried using a paint strip disc but it clogs up pretty quick and having to much heat causes metal warping.
@AudieChason7 ай бұрын
I'm having good luck with the 2 and 4.5" strip discs I can get from Amazon. They chew through powder coat pretty quickly so I have not had any heat issues. There are a few KZbin videos of people using acetylene torches and it removes powder coat so fast, that the metal doesn't have time to heat up. I'm giving serious thought to getting a laser rust and paint remover. It also removes powder coat very quickly with no damage to the metal. Its probably the best solution there is but the devices are close to $1000.
@mankihonda9833 ай бұрын
Methylene Chloride. And it was only removed from consumer chemicals. You can still get it in various "professional only" chems which are still sold to anyone who knows to find them, like gasket removers. "AT" still makes a gasket remover with 75% MC content. Methyl Ethyl Ketone or MEK isn't banned at least not as a hardener, you can still buy it in pure form by the gallon for your composite and 2K paint jobs.
@AudieChason3 ай бұрын
@@mankihonda983 I just ordered a 1500w laser paint stripper from China. Hopefully, that will solve my powder coat stripping frustrations.
@chrischann34987 ай бұрын
i want to do this on my rims would this damage the aluminum if i use the head gasket remover?
@Letsmakesomething17 ай бұрын
No it wouldn’t as most of the gaskets sit on aluminium like the water pump and the cylinder head.
@user-vy8ef9fk9i9 ай бұрын
What brand stones are used? And grits that were used in the video?
@Letsmakesomething18 ай бұрын
Hi the stones used are A DMT brand and grits are fine, extra fine and extra extra fine. Hope this helps.
@abarragan9519 ай бұрын
Will it work for an aluminum intake manifold? I bought a used one and it its powder coated black with lots of clear
@Letsmakesomething19 ай бұрын
Yes it should, but you might need to apply it a bit thick about 2-3mm thick.
@richardhouse799710 ай бұрын
Would’ve been nice to see what kind of paint stripper that was instead of hiding the label dammit!
@Letsmakesomething19 ай бұрын
Sorry it wasn’t intentional to hide the label, I didn’t give it much attention because a lot of paint strippers will do the same job , but the paint stripper I used in the video was Poly paint stripper, it removes all household oil and water-based paints and most industrial, marine and automotive finishes.
@CraftwerksMC3 ай бұрын
I have to wonder how well that plate was powder coated? I only say this because more often than not most any paint stripper made now will have little or no effect on a properly powder coated item. Ever since they removed Methyl Ethly Chloride from paint strippers most of them will barely remove paint much less powder coat.
@AIsk-qh6pq10 ай бұрын
this made my life so much easier i was using flap discs to remove it only if i knew paint stripper works with powder coat to remove it, i guess you always learn
@CraftwerksMC3 ай бұрын
If won't now days unless it is some really old stripper or something made outside the USA.
@user-vy8ef9fk9i10 ай бұрын
nothing better then bringing something back to life💯
@user-vy8ef9fk9i10 ай бұрын
first to comment
@user-vy8ef9fk9i10 ай бұрын
💯💯💯💯💯💯💯💯💯💯💯
@user-vy8ef9fk9i10 ай бұрын
I actually got my saber wet stone grinder after watching this video i was looking at the tormek t8 and was leaning more towards it but after watching you video i thought it over and decided to take the chance and i do not regret it, thank you for your non bias review.💯
@user-vy8ef9fk9i10 ай бұрын
I use paint stripper works great, and its less messy then the crc and i don't think crc is meant for stripping paint but I've seen people use it. don't know why they use it over paint stripper as the cost is a lot higher then your standard paint stripper
@garyzhang50998 ай бұрын
Because not every country allow such strong paint stripper for individual buyers. The strongest stripper I found in Canada is pro form aircraft stripper, and it just doesn’t work very well on powder coating
@user-vy8ef9fk9i10 ай бұрын
only if i knew how to weld
@user-vy8ef9fk9i10 ай бұрын
I might make something like that for my batteries, like the idea and i have plenty of wood laying arround
@saidjansaidjan658811 ай бұрын
❤❤❤❤❤
@EVA190311 ай бұрын
Просто нет слов! Столько мудохаться, что бы сделать? А сколько нужно электроэнергии затратить на это)))
@Letsmakesomething111 ай бұрын
There is no fuss it’s about Art, I’ve made something from scrap timber the will not go to waste and a mallet that I find comfortable in my hands, as for electricity the cost was about $0.26.
@AIsk-qh6pq Жыл бұрын
I love the feature in the timber.
@ahmettuzun8923 Жыл бұрын
You convinced me i subscribed.
@halilesen3952 Жыл бұрын
I don't use a chisel but this video is entertaining
@ztnoyunda208 Жыл бұрын
im impressed how sharp it is
@muhammadsakhawatlanjwani3873 Жыл бұрын
Good vedio
@wt96532 жыл бұрын
I bought 5pk Amazon Ego battery holders. It's meant for wall mount. But, it also has a loop where belt slide through. I wear belt with two Ego batteries. When I go weed eating or leaf blowing. I feel good knowing I have two spare batteries on me. I probably could put all 5 on the belt. Probably even shoulder mount like RAMBO!🤔😁
@masalndunyas3812 жыл бұрын
Very intresting
@animeblack93842 жыл бұрын
Thanks for the video
@pubgmobil14832 жыл бұрын
Love the idea that the wheel goes both directions
@cagatayyaman28292 жыл бұрын
Good informative video
@SNIPER-dk5os2 жыл бұрын
Amazing and so inexpensive
@pesmobilturkiyehd67582 жыл бұрын
Nice video, brought my saber 2 years ago and love it
@tyraxtyrux36752 жыл бұрын
Thanks, it was hard to find info like this to compare
@kadirvefatemiz75242 жыл бұрын
I got the saber and happy with it
@protolga93542 жыл бұрын
Great job bro nice
@emris10752 жыл бұрын
Terrific Video
@relaxingpanda46872 жыл бұрын
Awesome Video cant get simpler
@mustafakarabayr4852 жыл бұрын
Just done one today thanks
@yagizmehmetmaceralari89272 жыл бұрын
Thanks tried this and it works
@ceylanablannyeri2 жыл бұрын
Thanks, just what i need since i have a small garage