Scott Bot Autos

Пікірлер

@karynj3075 28 күн бұрын

What happens if the red piece is broken? Where would I find that one piece?

@camarobossman 27 күн бұрын

If you still have the manual, call the manufacturer and ask them for that piece. Just ask them for the hot side. I would think they would have it since they sent me two replacement cartridges under warranty. I don't have my manual anymore. Wish you the best

@ebkbanks1197 29 күн бұрын

I never even subscribe like that but yo this vid was a godsend for someone like me who knows nothing about cars, super easy to follow, well spoken, and you seem like you know what you’re doing + good camera work. Thank you so much for this

@sgause07 Ай бұрын

Thanks bruh that was very helpful

@nsourced4942 Ай бұрын

I had to just replace my cooling fan module on my 2014 Q50.

@randallwilkinson3160 2 ай бұрын

Thank you for the instructions. Really appreciate it. I didn’t know to install them until I saw your video.

@Sertao2013 2 ай бұрын

You don't have to replace the cartridge just replace the 0-ring . You don't even have to replace he o-ring . Just move the o-ring up and out of the way of its slot and put 2 wraps of yellow teflon gas pipe tape and put the o-ring back in place over the yellow tape and put it back together .

@MyYouTube_2425 2 ай бұрын

Awasome video keep up the good work

@cameronbrown9337 2 ай бұрын

THANK YOU🎉

@Kro.. 3 ай бұрын

Hey buddy you helped me out so I'll help you out in return with a tip.... you kept saying you don't have a jack.... well there's a hack for that... if there is a narrow ditch or a narrow hole in the yard then you can drive the vehicle over it... not in it but over it.. from there you'll be able to crawl in the ditch to slip under the vehicle easily and have plenty of room to work... I do it all the time... in fact I trust the ditch or a hole in the yard more than I do a jack

@camarobossman 3 ай бұрын

@@Kro.. lol I got ya bro. Thanks

@mikellbrown345 3 ай бұрын

How is it holding up I have the same issue fans are very loud

@camarobossman 3 ай бұрын

No problem since fixed. Of course stick with OEM fan module or you will be possibly replacing an engine because of and aftermarket replacement failing to turn on the fans at high speed.

@mikellbrown345 3 ай бұрын

@ thank you. Tired of it being super loud even on cold starts 😂

@camarobossman 2 ай бұрын

Lol@@mikellbrown345

@silverbackking 3 ай бұрын

Nice job finding that...would have really helped your video if you had not recorded this in a cave. But thanks!

@camarobossman 3 ай бұрын

@@silverbackking Lol got ya

@silverbackking 3 ай бұрын

Turns out this is exactly my issue. There is a split. Did you use the same clamps and how did you get to them...super tight spot as you know. Crazy thing is that the clamps are facing towards the dash making it even more difficult to get to. Im sure they do this on purpose. LOL Thanks for your help boss!

@camarobossman 3 ай бұрын

@@silverbackking laugh out loud, I used a standard pliers. I recommend using a small vise grip though. That way you can let the vise grip hold the clamp while you pull the hose. I was able to get to both of my clamps easy. I hope you don't have to take the intake manifold off just to get to that last clamp. Since the hose is broke anyway, technically you can cut it with a scissors and turn the remaining clamp by hand to get it off the intake manifold. Keep me updated.... These clamps are very easy to turn by hand to wiggle them off once you have the hose cut. You can then position the clamps exactly the way you need them when you put the clamp on the new hose

@silverbackking 3 ай бұрын

Yes, good idea! Thank you!

@henrysylvester4426 3 ай бұрын

Good video straight to the point

@amandajames4841 5 ай бұрын

Great work Scott Bot, very detailed.

@85rx7se 5 ай бұрын

You need a tool we call a Pick Sticker .. You can make it yourself, just a couple of different sizes of sewing needles mounted into a wood or plastic dowel.

@camarobossman 5 ай бұрын

Thanks for the advice. Had to look that one up. Looks like it will be good for the wire harness connectors.

@JanetDurham-el2bq 5 ай бұрын

How high up in the container should fluid be

@camarobossman 5 ай бұрын

@@JanetDurham-el2bq fill it up to the cold full level. Then check it after your car is driven for a while it should raise to the hot level mark. Let it sit overnight and check it again and see if it went back to cold. If it's at the correct level you are done with topping off correctly.

@renaper117 5 ай бұрын

Did not specify what oil you gave not a good review on how to do a oil change for a pacific car -5 stars

@Bruxmane 5 ай бұрын

You’re stupid.

@The_cperk 6 ай бұрын

Not only are you a scholar, you are a saint. 😂 Thanks for the help!!!

@IISheayTV 6 ай бұрын

Thanks 🙏🏽

@billgreen7278 7 ай бұрын

Thanks for the video. My son’s 2011 maxima had the P0171 and you could hear the hiss like you showed and it was the exact same thing.

@dbenders1 7 ай бұрын

I have the same issue on my 2014 maxima. I will check this today and hopefully this will be the fix. It doesn't look like it is easy to get to though, but I will check.

@fernandomelgar5088 8 ай бұрын

Did it ever shut off on u

@camarobossman 8 ай бұрын

No not at all

@jorgemonterroso6698 8 ай бұрын

Please tell me wich way loose the bolt for the Adler ?

@carolynorr3474 8 ай бұрын

Thank you so much. This is easy. I had so many horror scenarios from mechanics about how they'd have to remove my bumper so they'd have to charge me more. Thank you. Thank you. Thank you. I think I can do this.

@benlotstein3179 9 ай бұрын

Where did you buy the replacement cartridge?

@nealshome 10 ай бұрын

Exactly the same problem. Thanks!

@MomOG313 10 ай бұрын

Thank you for this

@genevaelliott1354 11 ай бұрын

Thank you now my sink dosen't leak😅

@JennaCook-s5e 11 ай бұрын

Thank you!!!!!❤

@laceydalton5278 11 ай бұрын

Replaced the battery in my 2013 Nissan Maxima S and my automatic window feature wasn’t working. Came right to this video and fixed my issue now my windows roll down and up automatically! Thanks

@miket2791 11 ай бұрын

Extremely helpful video, thank you. I really appreciate you going step-by-step and explaining the whole way. I have the same sink and was getting low pressure on the hot side. Replaced the aerator, valve, faucet line, and cleared the main supply. With your video, I washed and cleaned the parts you removed and the pressure is fantastic now. Contacting Lowes now for a replacement of both cartridges.

@thomasshevins8231 11 ай бұрын

Hey i know this is old, but do you know the name of the plastic piece you put in at 4:55. Mine is cracked and i cant find the part.

@mikepollitt8618 11 ай бұрын

How to get a stripped alternator mounting stud

@MB-rr1fb Жыл бұрын

Thanks for the window tip

@Soulful_Cray Жыл бұрын

Can't thank you enough I went to a mechanic qouted me 400 plus a diagnostic to fix something that only cost me $17 the dealership

@aljames354 Жыл бұрын

Thank you sir

@pean4448 Жыл бұрын

Scott you are the man

@lilnickel1983 Жыл бұрын

Thank you so much. This was exactly what was wrong with my 2011 nissan maxima. Cost me $23 for that part.. That item # doesn't stay up long. It's 11826-JA10B. FYI. This is the shorter one below. The other one they call a lower gas hose for some reason but it's longer and above this one. Thanks again

@jakhihilton1505 Жыл бұрын

My maxima took a lot of convincing but now both my automatic windows roll up and down thanks!

@DaMoney-ds6mv Жыл бұрын

Nissan Civic da fuck nigha

@magnem777 Жыл бұрын

A bad and failed car with many problems and malfunctions.

@luiscaban3523 Жыл бұрын

Thanks bro i needed this video

@kjk4795 Жыл бұрын

Freaking beautiful

@camarobossman Жыл бұрын

It sure is. I think the next one will be electric though. I would like to see a twin turbo version. Laugh out loud with the new 10 speed or some type of automatic. Not hating on the CVT but I like the natural shifts

@humbleant5142 Жыл бұрын

Did this myself, thanks. However the moment I tighten the pressure hose bolt into the rack, The steering wheel gets completely stiff locked up. If I crack the nut just barely loose enough to leak, the wheel is loose and free again, but will lock up the moment I tighten the bolt. What could be the issue?? Please advise.

@hmongguy4573 Жыл бұрын

Same sh!t happens to my 2014. Thank you very much for sharing!

@angelvoice818 Жыл бұрын

Haha! I love this guy's down home accent! No place like home (Bama).

@maddrandy6823 Жыл бұрын

Next time take the wheel off

@SirMaxima2011 Жыл бұрын

thanks so much i will be doing myself i have 2009 maxima i had this car for 14 years with 148,000 miles on it and still runs good. my struts just ran out(smile) got some new ones have a bless day

@cometogetherlikevoltron1230 9 ай бұрын

I have 273,000 miles on a 2012 maxima SV. Same transmission second motor.

@blueskies7785 Жыл бұрын

Do both windows at same time 😊

@kugoo1231 Жыл бұрын

What hose is that and part number

@camarobossman Жыл бұрын

6 min mark of video

@alliho2243 Жыл бұрын

Thanks for the video, same problem in my Max. Thanks for helping me fix it.

Ең жақсы KZbin

Пікірлер