Pci-e to M.2 Installation
6:47
2 жыл бұрын
Romoving Activated Bitlocker
10:33
2 жыл бұрын
Removing a partition with Lazesoft
2:59
Removing bitlocker
3:51
2 жыл бұрын
disk cloning with a bitlocker twist
6:50
Corel Error Code 38
3:09
3 жыл бұрын
Crashing Computer
8:37
3 жыл бұрын
hp 17 keyboard replacement
19:54
3 жыл бұрын
Пікірлер
@aiwe6173
@aiwe6173 3 ай бұрын
I hope you can answer this...I have a similar situation..the new keyboard fits but is it suppose to snap in place or does the brace keeps it in place or is there something else I can do...
@alltech247
@alltech247 3 ай бұрын
THANKS A LOT :) GOD BLESS YOU ........i watched so many videos to fix this issue while installing win7 and tried a few different ones but none worked ...almost gave up but watched this one and it worked like charms....... THANK YOU THANK YOU THANK YOU :)
@thomasalbiez3428
@thomasalbiez3428 3 ай бұрын
Thank you 🙏
@Ahmed_Obeidat04
@Ahmed_Obeidat04 4 ай бұрын
thanks a lot, it works ❤. for my bios it was called mouse and keyboard simulator.
@juanjavierm
@juanjavierm 6 ай бұрын
This videoclip is useless for every BIOS setup that does not include the 'Devices' menu.
@mayankpathania3898
@mayankpathania3898 8 ай бұрын
Tanks brother
@RobertPearson777
@RobertPearson777 8 ай бұрын
I have an HP desktop that obscures this part of bios. Is this bios in all machines? I cannot find any way to boot into it. It's like they gave me HP Bios Lite.
@Disillusionated
@Disillusionated 5 ай бұрын
Yeah. I have a msi motherboard but I cannot find this in my bios as well. Does anyone know if this exists?
@Mariuszgamer
@Mariuszgamer 9 ай бұрын
I wish I had a ps/2 mouse since my ps/2 keyboard works on windows 7 and my USB mouse is not recognised
@Mariuszgamer
@Mariuszgamer 9 ай бұрын
I have a custom built msi gaming PC that I just installed Windows 7 on it (also have Windows 10, 11)
@EduardSpalins
@EduardSpalins 9 ай бұрын
Thx I think this worked
@hackerSpot4214
@hackerSpot4214 9 ай бұрын
Thanks jaani😂
@LyuboT
@LyuboT 10 ай бұрын
Thank's , solved my problem !
@jasonlayman8817
@jasonlayman8817 10 ай бұрын
Sadly all my ubs in bios shows checked and I still have the mouse and keyboard issue.
@texaseaglejcl
@texaseaglejcl 10 ай бұрын
Thanks for this. Pity the camera as off-center a bit.
@wolfenixtheproducer7512
@wolfenixtheproducer7512 11 ай бұрын
🙂 Hello thank you, for the video it is very helpful. I have a question. What kind of glue do you use at minute 11:25?
@adnanzubair4528
@adnanzubair4528 11 ай бұрын
Salute you with 5 Star rating❤❤❤❤❤. Superb method.
@udofs2020
@udofs2020 Жыл бұрын
Sehr gutes Video
@sashakupetsky
@sashakupetsky Жыл бұрын
Mine new one lasted 11 month. Am I so lucky, or just shitty keyboard?
@GrobmotorikJones
@GrobmotorikJones Жыл бұрын
my BIOS (gigabyte mainboard) hasn't virtual kbc suppurt either...
@wbs4506
@wbs4506 10 ай бұрын
me too
@61443
@61443 4 ай бұрын
same
@spacemanmonster23
@spacemanmonster23 3 ай бұрын
I'm in the same boat...
@EnigmAHAS100
@EnigmAHAS100 Жыл бұрын
Оторвав эти пластмассовые заклепки, разве они будут держаться, на том что осталось ? Hp почему то делает такие корпуса, это настоящий геморой пока все снимешь.
@roberts2554
@roberts2554 Жыл бұрын
Thanks!!
@kevincortes106
@kevincortes106 Жыл бұрын
Complete useless
@tonyalillie7971
@tonyalillie7971 Жыл бұрын
So now, two years on - did this repair using the hot glue gun hold? I just bought a replacement keyboard thinking it would be easy - but then realized I had to melt off the old plastic pins on the cover to get the old keyboard off. Wasn't sure hot glue would hold and thought I'd have to remelt some plastic in there...
@engovali1719
@engovali1719 Жыл бұрын
Thanks helped alot
@nenume00
@nenume00 Жыл бұрын
hey rob , would really need any more info/videos on this a hp pavilion 17 ab series, any more info would be lovely I have te non backlit version. Can i use the keyboard light port to power a small 3v or 5v fan ? The port should be just near the keyboard-motherboard ribbon connector
@eogutveren
@eogutveren Жыл бұрын
Can this keyboard changeed to a lighting keyboard?
@om4gaa
@om4gaa Жыл бұрын
For me every thing is enabled ut it still dosent work plus i dont have virtual kbc support option so pls help us
@randomguy5704
@randomguy5704 Жыл бұрын
This is why I only buy and sell Dell business laptops. Any company that is this greedy is to be avoided.
@tizio54
@tizio54 Жыл бұрын
Is this the same as with the Windows 11 "Settings" panel? > Privacy & Security > Device Encryption [ ON | OFF ]
@tizio54
@tizio54 Жыл бұрын
Very useful video ... but how do I reclaim the additional space on my new drive?
@computerrepairswithrob6282
@computerrepairswithrob6282 Жыл бұрын
Normally you would go into Disk Management and delete/extend partitions there. Failing that, there are a number of programs out there that will delete/move/extend etc. partitions.
@tizio54
@tizio54 Жыл бұрын
@@computerrepairswithrob6282 thanks for this info. The Lazesoft disk-cloning software worked perfectly. Unfortunately my (Dell) laptop failed to boot properly with the newly cloned M.2 NVMe 2TB drive, after doing a sector-by-sector clone from a 1TB MVMe drive. Any suggestions?
@computerrepairswithrob6282
@computerrepairswithrob6282 Жыл бұрын
@@tizio54 I ran into that issue and then when I updated my Lazesoft version, it worked fine. I believe Lazesoft has free updates.
@tizio54
@tizio54 Жыл бұрын
@@computerrepairswithrob6282 but I downloaded Lazesoft yesterday (for the first time) so I assume it was the latest version. I could try Macrium Reflect, as some KZbinrs recommend. Or I could decrypt my drive/disable bitlocker as you showed in another video, before cloning. I'm not sure what the general impact will be on my laptop if I disable bitlocker encryption.
@computerrepairswithrob6282
@computerrepairswithrob6282 Жыл бұрын
@@tizio54 Curious that it's not booting with the latest version of Lazesoft. I don't think there is any impact on the laptop in general, by disabling bitlocker encryption; at least there was none when I did it. As far as I know, it just affects the storage drive.
@computerrepairswithrob6282
@computerrepairswithrob6282 Жыл бұрын
I totally agree!!!
@randomname9758
@randomname9758 Жыл бұрын
Thanks. I need to do this soon but it's insane the amount of work that needs to be done just access that keyboard. It should be like the old laptops will you flip it the proper way lift it from the top and replace the whole thing that way. 🤬
@isaacvaca7575
@isaacvaca7575 Жыл бұрын
Nice
@Andre-nx5xl
@Andre-nx5xl Жыл бұрын
this is actually the best video I've seen about the subject. Thank you! :)
@davidschisler3385
@davidschisler3385 2 жыл бұрын
I just replaced the keyboard in one of these and your video was invaluable. Can't say i watched every step and heard all your comments. But I was successful mostly due to this video. Thanx.
@zed2396
@zed2396 2 жыл бұрын
i can t find usb virtual kbc support option
@JK_Tirupur
@JK_Tirupur Жыл бұрын
Same problem we have any solution plz
@padilish
@padilish Жыл бұрын
same to me
@btito916
@btito916 Жыл бұрын
Same here
@AKABattousai
@AKABattousai Жыл бұрын
​​@@btito916 (edit, it might actually need to be usb1.0 that's needed) you can try using a USB 2.0 plug. My old case has front panel 2.0 and apparently windows 7 doesn't have boot support for USB 3's
@pennystocklocks
@pennystocklocks 2 жыл бұрын
wtf why cant they just be like dell and let it snap out...glue gun FOH
@sc0572
@sc0572 2 жыл бұрын
Has to be to force you to buy a new one instead of repairing it. I thought this would have been an easy fix.... WTF...
@Samuray1411
@Samuray1411 2 жыл бұрын
hello all right, would you have the model part number of this keyboard for replacement?, thanks