I like this rack. Rv and travel trailer approved even for E-Bikes. Thanks for the video

Ergon themselves have said that if you're in-between their saddle sizes (they mention 12 cm sit bone width specifically, exactly on the border, but I'd say it applies to slightly more or less than that as well), they suggest the larger size if you're sitting more upright, otherwise the smaller size. Their video about it, from 2019: kzbin.info/www/bejne/l57MZ2epprOggKM

Hi Brad ...when I create my own segments, they will not load on my Garmin... All the public segments load up just fine... I hearted my own created segments and they still won't load

At that point just break the cap off. It should have a regular cap underneath the child proof one. But I agree. What a dumb design.

I have the 118”and my fuel computer is inaccurate. I always check manually. Regardless Never rely on that range because the one time I pushed it to the limit on low fuel the range reading went from approximately 30 to zero I got off at the next exit about 7 miles ahead

You basically documented what not to do after surgery.

Hey man! You have any update on this bike years later?

I'm using it for a while now, and it's the greatest thing. Recently I had to download it again and data fields were all messed up. I didn't know how to set them up the way I wanted before I saw this video. So I just wanted to say thank you.

The retention tabs are definitely the weakest part of the M2 battery lineup, that and the batteries need to go into the charger straight on, if they tilt a little bit, you’ll get a battery charger error and have to take it out and reinsert it. I think Dewalt battery retention set up is far superior, as are their 12/20 V combo chargers-much smaller footprint.

Thank you so much, super helpful.

I will test it out on Friday. Thank you for the tutorial.

Dude, stay behind the saw when demonstrating!

I gave up looking for wide toe box mountain biking shoes some time ago. Having made the full switch to minimalist wide toe box zero drop shoes, I now just go out riding in my wide toe box trail shoes. So much better.

How did you get it open to place the inner tube

Trouble is when you finally find what you really like, they stop making it. This happened to my favourite, the Giant Fleet SLR forward, & my 2nd fav, the S-Works Toupe.

😅😅😅 i just get that gps i waste my money don't buying this

Thanks for sharing! One suggestion: take a bag full of nuts/bolts that fit your bike, zip ties and a couple of extra spokes for your rear wheel. The zip ties will work well to replace lost or stripped out bolts. Lastly, you'll more than likely need to double bag all of that so that it does not pole holes.

Junk

The tabs the hold the battery on the saw are on the highest point of the release tabs ,squeeze both sides at the very top.

Great viedeo, thanks. I could not get the guys in the bike shop to do it as they were unfamiliar with the Cannondale DD50. Now it will probably be very hard to find a shorter stem....

Y'all a bunch of old folks lol

Yall pack everything including the kitchen sink

My dog is a small bichon cross & ruptured her CCL 3 weeks ago. She was recommended a TPLO ($5-8k here in NZ), but I couldn’t afford it so the vet suggested Extracapsular surgery for just under $3k. The post-surgery instructions included a lot of Range of Motion exercises to do 3x a day, didn’t your vet recommend these? Looks like they only suggested rehabilitation (with an agency) at week 3? If so that’s poor care from the vet clinic that operated. The range of motion exercises are critical to ensure the muscles surrounding don’t shorten or atrophy during recovery. Also, some breeds are genetically disposed to osteoarthritis and CCL rupture, particularly labradors. My vet told me the rupturing is usually part of the arthritis process, and that after surgery (which alters the joint) the dog will develop arthritis with time regardless. My dog is 12 days post op and already walks better than yours, which breaks my heart for you. The best thing you can do now is put your beloved dog on a supplement with MSM, glucosamine & chondroitin. I’m starting my girl on a supplement called ProJoint 4 Dogs, which is by a brand Lillidale. It has those ingredients + others which targets the inflammation caused by arthritis (which will help with pain), and strengthens cartilage and connective tissues. That’s important because my vet said that for 25% of dogs who rupture a rear CCL, the other leg goes within 12-18 months. It’s been a bit longer than that for you so it might be wise to get a supplement started asap. Best of luck, it’s a really difficult process, especially watching your beloved dog in pain. ❤

This brush cutter is ideal for my blackberry cane problem. The "hip barrier" piece attaches to the handle to protect against kickback. I think Milwaukee supplies it for a reason although I have noticed no tendency to kick back. If you hit a hidden piece of metal by mistake or large sapling perhaps it could? Anyhow, installing it takes but a moment or two and there is no downside to it AFAICT. So far, no regrets on buying this brush cutter. Also using it with the 12 a-h batts that came with my M18 mower. That does make it a little back heavy.

So frustrating as i love this saddle.Ordered what i thought was the same one but sadly it wasn't. Have you had any luck with any other saddles?

Life saving 🙏🏾

Thank you so much! Great advice it worked a treat!

Looks like the Verse Short Comp saddle...in the Video it looks like the "new" is around this 2cm longer...? Would really be interested if my guess is true...

Years later, still working. I have used full sus with these same exact rims and was feeling like an absolute moron. Thanks dude.

Thanks so much❤

Ergon gel is to hard especially when new! The raised edges cut my nerves off and I went all numb up the right side of my balls to my groin to ass cheak like it triggered my sciatica in summer! Im still getting over it the numbness hasn't got much better as yet these "comfort zones" are bloody dangerous!

I see all the comments about post care. But he is only skimming through the timeline so we dont the extent of the post op care. We had the same surgery for our amstaff and definitely followed the post op care given and we are having the same issue. Surgeon is recommending plate removal and i can honestly say the care given after surgery has been piss poor post follow ups.

24:25 big homie Snyder!!!! Yo bro I want my CHOCOLATE MILKSHAKE!!!

THIS WORKED! It took a lot longer for the gps to be recognized than normal - for me 44 seconds. But it worked! (boy was this annoying... my watch was stuck on a different day&time) THANK YOU SO MUCH!

The only M12 I own is Milwaukee’s Rotary tool. Everything else is M18. For the extra couple bucks buy M18. M12 rotary tool is awesome, but Milwaukee’s ecosystem is primarily built around M18. Not only a huge performance difference between M12 & M18 hatchets, but also every other tool as well.

I had the same problem today. After a hard reset the problem still persist.I was completely lost. Luckily, I foun this video. Pending to check the results. Thank you so much!

I agree - get someone to assemble - mine is larger and we are maybe in 10 hours in and not done yet - drawers are a major headache - I think it will be good once its done but omg - not an easy feat

Law enforcement 2 cannondale lasted 1 month

I thought it was just me. I feel vindicated. Thank you!😊

Have you tried lake mx169 or 201?

Spent about 2 hours trying to connect, saw your video, and it worked .Thanks very much

I am glad you were ok I was right there when it happened and was trying to help the kid get back on the trail! Thanks for sharing the pictures and videos!

Just bought the Milwaukee M18 brushcutter, and to be honest, it's pretty shit! My Husqvarna 535LK is on a different planet!

Hey Buddy good to see you are OK! I debated keeping that gopro active on scene for ya, glad we did, much love!

Did you return ?

solved my problem, same solution with android phone

Looks like a piece of shit

Phew Brad Lucky You Ain't Killt! Glad you live to Snap Photos the rest of the day!

Thank you so so much for this video!!! I'm starting out on my 6 month Travato trip and the door wouldn't open from the outside, only the inside. I couldn't get the magnet plate off as there are no screws to unscrew it. So I took a screw driver and opened up a little space on the top and shoved a very small piece of once sided vel-cro into the opening. I did this on the bottom as well. Now it works! Thank you again!

M12 is solid, I just got one a week ago. I’m not competing so I don’t care how fast or slow it is.