I just bought a 2015 Craftsman with the same rs800 transmission for 300 needs gt37401 belt
@gregtarasinski55166 ай бұрын
Good video but.... I don't use loctite It's only plastic n loctite might damage threads on removal
@georgestrickland92786 ай бұрын
could have been a dependable trans if the 2 variators weren't made so cheaply
@michaelmull24088 ай бұрын
I didn’t think it would fix my problem, but it did. Just a little dirt and leafs.
@michaelmull24088 ай бұрын
Very helpful. The only video I could find that matches the problems I have with mine.
@rdberk10 ай бұрын
Great video. Saved my day. Thanks so very much.
@Thomas-ul3uy11 ай бұрын
Owners not keeping mower clean of debris is the only fallback of this transmission. Otherwise it is a good transmission.
@jeepinspence Жыл бұрын
If that DOESN'T fix the problem so one replace the variator or transmission?
@JourneyOnLife Жыл бұрын
Thank you : )
@pierces2885 Жыл бұрын
Thanks for posting. This problem has been driving me nuts for months on my Poulan and I’ve been cutting my grass by hitting the brake then the Excelerator pedal in whichever direction it was stuck on, back-and-forth brake, and Excelerator brake and Excelerator until it would finally switch from forward to reverse. It was a constant battle. I researched it several times and couldn’t find anything conclusive to fix the problem until I stumbled across your video today. I was literally finally going to stop being lazy and load the mower on my truck and take it to a repair shop. I would’ve been out a couple hundred dollars if not for this video. I simply took out the battery and battery box and took my shop vac and vacuumed all around the transmission, belts and axle. I got every loose little piece of crud out of there without even taking off anything other than the battery box, and the mower works great again like it’s brand new. Easy fix thanks to this video!!!
@jerrysorrell7775 Жыл бұрын
On my mower the 3 springs under the cover marked with the blue 30 in your video were packed with dirt. The forward and reverse pedals would stick, cleaning out the dirt fixed the problem. I didn’t have to remove the transaxle to do this but I did have to separate the plastic cover by snipping a tab connection. Someone has a video on how to do that.
@RedsoxPats34 Жыл бұрын
Tried this on my Poulan now it’s back to normal. Thanks!
@markziglinski1419 Жыл бұрын
Excellent video!! This was the problem I was having with my Poulan Pro and was able to fix the issue following the video instructions. Saved me $$$ the repair shop would have charged for this easy fix.👍👍
@Lecknye1961 Жыл бұрын
Why don’t you tell us what you’re doing? Instead of put it in words.
@joaograca4657 Жыл бұрын
There’s a lot more debris under the plastic cover, believe me, just did mine, what a nightmare
@rogergoodwin5533 Жыл бұрын
Ok solved my shifting problem. Thanks
@rogergoodwin5533 Жыл бұрын
Is cleaning needed of shift rack under the dust covers.
@benjurqunov2 жыл бұрын
Mine has fueltank in the way. I can remove the seat & fender support for some access but its not a 1/2 hr job. Its a big PITA to access the top of gearbox. I’m swapping out to hydrostatic.
@labtop23502 жыл бұрын
I’ve got one and just replaced the belt and it’s not moving… Feels like it’s slipping.
@dogdog19602 жыл бұрын
Worked like a CHARM! Repair places were clueless. Shifts great now, zero creep. I'm gonna cut a hole in sheet metal so I can spray water in there after each use.
@davidstake68572 жыл бұрын
Now I know what my recycled plastic bags were used to make.
@stevebrooks86252 жыл бұрын
I'll just keep my 25 year old MTD and 30 year old Murray both with a 12hp briggs and belt driven with absolutely no problems
@mddleman2 жыл бұрын
Thank you for the video! This makes me feel good about buying a used Craftsman T2300 that has this sticking pedals.
@eded97422 жыл бұрын
Thanks for posting this, it works great only takes 10 -15 minutes. My tractor is around 7 years old and this is the second time I've had to do this repair, seems like a bad product design, again great post fixed my tractor right up !!!!!!!
@terryplummer68922 жыл бұрын
My battery isn't under the seat. The gas tank is under the seat and under the fenders & body unit. I see no way to get to the top of the transmission without dropping the transmission. I will check with General Transmission and see if they give any ideas. I have blown the debris out of the top of the transmission area with compressed air, but it is very hard to get to.
@TDK392 жыл бұрын
For those having mower with gas tank in the way of variator, before going through pain of disassembly, give the area a good blast with leaf blower or compressed air while having someone cycle the variator by depressing the forward and reverse pedals (with mower off). I had this exact problem, tried this approach first, and mower is running like a champ again. Definitely worth a shot. Good luck!
@mddleman2 жыл бұрын
Thanks, would like to not have to take off the variator so will give this a try first.
@LL-fb8wz3 жыл бұрын
Mine would not drive just a bad variator. Replaced and now good to go vs a new trans.
@jmikronis73763 жыл бұрын
I’ll be trying this!
@josemorrasge81003 жыл бұрын
Why wouldn't you blow all of the debry on the whole transmission? Just curious
@benjurqunov2 жыл бұрын
I use a wand of copper tubing. It can reach into those areas to blow out debris after each use. My neighbor first owned it. After 90 hours, Gave it to me disgusted with himself for buying a crappy design tractor. After cleaning out a ton of debris and regular cleaning, It’s been working fine about 200 hours for me.
@daveetheridge83383 жыл бұрын
I have one of these transmissions in a Husqvarna YTA22v46. What a poor design. Grass and leaves get up under not only this pulley, but also under the brake assembly which prevents the linkage from the brake to descend all the way down which prevents tension from being fully applied to the transmission drive belt which results in the tractor moving slowly. Videos show you having to drop the cutting deck to get to this area where the debris piles up under the brake linkage. The design engineers screwed up on this one.
@JeffinTD2 жыл бұрын
IMHO best solution is to avoid owning one of these, but if you already do blowing the thing out with a compressor (or even a leaf blower) after each use might help.
@donnabush71923 жыл бұрын
My customer came by with his Poulan Pro tractor with the exact same transmission, the pedal kept getting stuck into motion when engaged forward to reverse. removed battery, and tray. cleaned out the entire back end, took me 12 minutes to complete process, with air-compressor ready, blowing the cvt system including the shaft inside, used special lube onto shaft so it can slide up and down better after blowing with air-tool. put it all together, as instructed on video, it worked with traction pedals set back into neutral, after pressing, forward without it sticking into motion anymore. Thank you!!!
@jason28003 жыл бұрын
Awesome, fixed the problem. Thanks!
@davidstill7543 жыл бұрын
Thank you very much for posting this. Up until you posted this I had no idea what was under that pulley. Now that I've watched your video, I have this same mower operating like it should. Thanks again !
@jasoncook56133 жыл бұрын
This could be the a class action lawsuit waiting to happen. Sticking in gear could get someone hurt bad or worse.
@1956fordss2 жыл бұрын
You're correct, very dangerous on my 37 degree front yard. When this stuck, it ran the tractor into my garage door which folded like an accordion. Over $700 damage. Really surprised me as I've had the mower since 2012; no problems except the leaking trans seals.
@johnstaub3593 жыл бұрын
I thought by blowing out the area with a blower I was doing myself well before any issues... now I have this exact issue. Thank you for showing the real way to clean the area. I tried the pm without removal and had no issues till I blew it out lol Now I can remove and clean correctly. Great video. Thanks again!
@mcdsdaddy3 жыл бұрын
Thanks for showing the solution to the exact issue that I'm having with my Ariens tractor. I will do this right away!! Thanks for the video!!
@TheJruppe3 жыл бұрын
Sawed our the gas tank and mounted an aluminum tank on the back. How I blow out the trans after every use and it runs great.
@jsbrown513 жыл бұрын
Worked perfectly! Much thanks for posting this.
@jamesbomer97384 жыл бұрын
Worked perfectly for me...and saved me $$$ on a service call. Thanks!
@browniebaby814 жыл бұрын
I have this problem as well but how do i move the gas tank out of the way?
@raybrandt81254 жыл бұрын
I wish someone would explain how reverse works mine will not reverse up a little grade at all ,put a new transmission belt on still not much reverse
@cma01tester174 жыл бұрын
My Poulan Pro was having an Issue were it was hard to shift from forward to reverse. I had to play with the pedal back and forth until it engaged. I took it apart as explained in the video and clean it good. It was all dirty and filled with grass clipping. After I cleaned it, it worked as it was new.
@keithfryklund51114 жыл бұрын
Thank you for posting this! This is exactly what I had to do to get my mower running correctly again.
@jimmymullins49974 жыл бұрын
Outstand exactly what mine was doing. Took apart, cleaned reassembled, and works as advertised. Thanks Subscribed
@tomrymarz55413 жыл бұрын
Had the exact problem which resulted in my three-year warranty needlessly replaced the transmission TWICE. Once I cleaned out the debris and stopped using the mulching attchment the mower works perfectly. New Husqvarna mower include a debris kit upgrade that helps reduce the debris collection. The kit is not perfect.
@lonnieking49114 жыл бұрын
My problem is the gas tank is under seat...now what do I do..
@stevegriffithsny3 жыл бұрын
I have the same problem with the gas tank. Did you find a way to get around this?
@lonnieking49114 жыл бұрын
My tractor has the battery in the front..no opening under seat to reach transmission. How would I reach transmission another way? Plz help
@Karl-ej6rs4 жыл бұрын
How do you remove the front pulley in order to remove the front case cover? I cant get it to slide off and I dont know what happens if I loosen the nut on the shaft.
@davidebelt43244 жыл бұрын
Worked great, thanks for the video.Tractor transmission is back to normal. I have a Craftsman t-3000, a real PIA as you have to remove rear seat, fender and footrest to access the area. I am hoping some strategic blasting of high pressure air from the rear chassis may work. Took a few hours to remove/replace all the parts to get at it. Gas tank is under rear seat complicating things.
@lonnieking49114 жыл бұрын
I have same issue. No easy access to transmission like in this video