@ have you Even tested it? It feels harder then Even Dignics 09c becouse the sponge is so firm
@StarD_Gamingz9 күн бұрын
@@KonstantinDjordjevic-fy7wt 37 deg hurricane hardness I mean, 41 and 42 are certainly harder than dignics 09c but others are not I believe
@KonstantinDjordjevic-fy7wt9 күн бұрын
@ yes on Paper it is softer but the sponge is really firm so it feels very Hard Even the 37 degree one. D09c is elastic
@cardindex565716 күн бұрын
Why do you only do front style throws? That’s interesting
@bkkidsnyc18 күн бұрын
you forgot the Sungwing, Overclock and the Davinci and bimetal Koi, Hypercut, Tankette
@jaspurp.chafer7063Ай бұрын
Where’s the brass ring version!!! It would be your best Yoyo ever
@alekssbelskis3544Ай бұрын
How come you prefer black to yellow oil, what’s the difference in the hand feeling?
@philipyyfr1977Ай бұрын
@@alekssbelskis3544 I never tried haifu yellow, sorry.
@alekssbelskis3544Ай бұрын
@ Fair enough, we table tennis player stick to what we like and what works for us. I’m tempted to use the yellow oil on my T05 hard as it’s good on higher impact shots but has no feeling on other shots. It’s the only non-tacky Butterfly rubber that I’ve used so far that can handle the full impact of my swing without bottoming out, so I’d like to boost it enough to make it bouncier and improve feeling on all of my shots but keep the benefits of the harder rubber by not overboosting and making it too soft where it bottoms out and hits the next on higher impact shots.
@rkkeisham6796Ай бұрын
Bro you ship to india??😅😅
@rookierookie1067Ай бұрын
Would you do this to tenergy 05/64 to be specific
@KonstantinDjordjevic-fy7wt29 күн бұрын
He Said no
@andrewyriveraАй бұрын
For that rubber you are using but the national one and what you would recommend the yellow one or the black one booster. Which is the difference?
@philipyyfr1977Ай бұрын
@@andrewyrivera I recommend black because that's what WCQ (seen in a picture) uses. I tried it with great result so I never used anything else.
@andrewyriveraАй бұрын
@philipyyfr1977 Thanks!
@bkkidsnycАй бұрын
Can you make a 55mm Papercut with even bigger ring?
@MuhammadQasim-v8j2w2 ай бұрын
Hi i am table tennis beginner i want to ask some questions. I would appreciate if you help me . Thank you. I just bought a table tennis set-up Dhs pg7 blade bh: H3 neo commercial Fh: h3 neo national blue sponge Glue: dhs 15 Booster: haifu seemon 1. I removed the plastic sheet from my h3 neo commercial rubber as you suggested in the vedio. But seems like i confused paper towel with tissue paper. Cause after boosting , my rubber is very dirty doesn't appear to be Brand new at all even though i haven't used it a single time. Probably some booster strains or maybe sweat or something else idk. I tried to clean with water but it doesn't work. Do you recommed something to clean it? Also for long term i have to maintain my other expensive National rubber. What do you recommend to keep it clean, is cleaning with water along with non adhesive protective sheets enough or something else? I also want to ask that i have cheap haifu seamoon booster, i used it on commercial rubber, is it ok to also use it on National H3 neo or do i need to buy haifu National? The expensive one? Do you recommend to me remove plastic sheet on national hurricane 3 neo before boosting (i will apply 3 layers of booster)? since i already have ruined my commercial rubber Thank you for your time.
@YOJAYO2 ай бұрын
Philip, pls give unbias opinion, ultra cut or evolve for compitition
@philipyyfr19772 ай бұрын
First they are at different price range. 35 vs 55. I personally think evolve has faster acceleration and top speed. Ultracut has more power. The stability is the same. Also evolve's 4.60mm gap width requires you to use kitty XL or OT fat. Ultracut at 4.52mm, you can get away with Kitty normal, fat and OT normal, Fat. So it depends on your budget, string preference and characteristic preference.
@YOJAYO2 ай бұрын
@philipyyfr1977 of you have 55 usd would you say tis worth to spend it on the evolve, or would you say you can get a just as good yoyo for 36 usd, the ultra cut
@philipyyfr19772 ай бұрын
@@YOJAYO I am bias and cannot answer this question. Get both.
@YOJAYO2 ай бұрын
Sweet review
@boreddrummer2 ай бұрын
my new favourite throw, couldn’t recommend highly enough, and the azure/purple ano is just incredible (all of them look incredible to be fair please keep these great colorways coming!)
@CAIOSILVAMACEDOCOUTO3 ай бұрын
Can I put 2 layers of Haifu Black on my Dignics 09c or is too much ?
@philipyyfr19773 ай бұрын
I do not recommend haifu black at all for tensor rubbers. Please use one layer of Kailin or falco tempo long/ plat instead.
@Ha-qu8yz3 ай бұрын
If you ever get around to it, I would love to see a video of you reglueing a rubber. I use the same glue you use, but when i take the glue of a used rubber i rip pieces of the sponge out.
@mcmrpeanut3 ай бұрын
Hello. I’ve been playing With simillar combination. LGY ALC, H3 FH and D05 BH. I’ve ordered and want to try H3 37 on my BH. Would you recommend the same boosting process as fh side or less boost?
@philipyyfr19773 ай бұрын
@@mcmrpeanut Same boosting process.
@gregtheflag4 ай бұрын
I would love to see a full review on the Crosscut from you!
@UTUBEUSER12WAS5 ай бұрын
If i can buy dhs hurricane 3 national ( not neo ) but its 2.2 thickness and also i can buy neo 3 national 2.1 which one is better to buy ( im planning to boost it ) Is it not recommendable to boost 2.2 thickness hurricane?
@philipyyfr19775 ай бұрын
@@UTUBEUSER12WAS I would go 2.1mm neo national. 2.2 is usually for speed glue.
@UTUBEUSER12WAS5 ай бұрын
@@philipyyfr1977 thanks a lot i’ll order it rn
@UTUBEUSER12WAS4 ай бұрын
@@philipyyfr1977 i boosted hurricane 3 neo nations 39 degrees with 2 layers of booster . It is domed for like 100 hours already . Should i glue it now or wait until it is completely flat
@philipyyfr19774 ай бұрын
@@UTUBEUSER12WAS you can glue it.
@UTUBEUSER12WAS4 ай бұрын
@@philipyyfr1977 wont it peel off? it have really decent dome
@nyzt_21525 ай бұрын
Why press it overnight? Won’t that compress the sponge and make it harder?
@philipyyfr19775 ай бұрын
@@nyzt_2152 to ensure adhesion. Also no the rubbers are too ridge for it to become harder by just pressing on it with a textbook.
@Iandarmawan03145 ай бұрын
Yay new vid if u remember me
@joebloggs25345 ай бұрын
When does this drop?
@philipyyfr19775 ай бұрын
Sometime in the near future. I asked Justin.
@Shaughnism2 ай бұрын
Yoyo expert and a couple other online shops have a bunch right now!
@joebloggs25342 ай бұрын
@@Shaughnism Nice, I managed to get one from YoyoRewind a couple of months ago. Glad to see them having a world wide release now.
@johnsnowie41575 ай бұрын
Hyped for this
@run-a-milekyle38356 ай бұрын
Picked up one of these finally. It kind of reminds me of the CLYW Klondike, but slightly smaller, making it quicker but still retaining the power and stability. Love it.
@leogajardo71046 ай бұрын
Can I boost a normal H3 neo to put on a viscaria? it will have a similar feeling as the provicial?
@srkstik__6 күн бұрын
if you're lucky, yes, hurricane 3 neo commercial just has less quality control so you might get one that's not the absolute best result the factory made, with provincial, it's more likely than you get a really good sheet, in essence, it's the same rubber.
@jaspurp.chafer70636 ай бұрын
Hey philip! We need a mini hummingbird overview! Always wondered your take on the mini. There literally isn’t one review for it on KZbin. No biggy. Just a suggestion. Thanks for all the great videos and yoyos. Excited for the mini I ordered today! Wanted one forever
@jaspurp.chafer70636 ай бұрын
FYI I got mine and freaking love it. What a perfect little Yoyo. Talk about a teleporter!
@jaspurp.chafer70636 ай бұрын
Mini hummingbird I mean. Lol
@edwardcandland87406 ай бұрын
Sounds good!
@diegodept6 ай бұрын
will this make the rubber faster?
@srkstik__6 күн бұрын
yes
@pankace32966 ай бұрын
For some reason the original Peregrine did not click with me at all. I found it really boring, like it was all performance and no personality. The Peregrine X feels like the original but so much more fun and satisfying to throw. The update to the only Yoyofriends yoyo I didn't really like ended up being one of the best in my opinion
@YOJAYO6 ай бұрын
This is like an a updated draunier
@matsen46206 ай бұрын
Hi, I have recently bought some Chinese rubber without boostering them. I have seen your other vids on glueing rubber an i wonder if it's ok or customary to boost the rubber after glueing like you do. Haven't seen this before. And is it ok to take my rubber off and reboost them and not take the glue off if you dont have to many layers of glue on it, you think? Greetings from Sweden.
@1powerequalsgod7 ай бұрын
I think Phillip mentioned the yoyo width is 48mm, that’s in my range not to go anything larger in size. You want a yo-yo that can be comfortably catchable. The v shape gap in my opinion is very large is where you want to know with confidence your going to land string.
@jaspurp.chafer70637 ай бұрын
Another super fun Yoyo from you guys. Had mine over a week and loving it. Think it’s my third or forth favorite in my Yoyo friends collection. My favorite pure v shape. Thx for all the hard work!
@Tmac144k7 ай бұрын
Just brought this Wednesday. I can't wait till it comes in
@omaririzarry17 ай бұрын
🌇🗻😊🌆🙌👏👏🙌👊👍😊🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉
@JKLee-dg4vz8 ай бұрын
How long does the boost effect last for H3? Should I re-boost after that?
@StarD_Gamingz11 күн бұрын
I won’t advice more than 2 times
@YOJAYO8 ай бұрын
Why did you guys discontinue the tachyon
@philipyyfr19778 ай бұрын
We have a small run coming soon.
@YOJAYO8 ай бұрын
@@philipyyfr1977 is it your second favourite now, or one of your favorites now that new throws have come and your new overlock yoyo has been released
@ginxxyami8 ай бұрын
Great job I love the mmo or idk rts or moba or arpg reference in the name. Seriously, passion like this is what makes people really enthusiastic to stay in the hobby, that makes people proud to be part of it.
@jamesmoore46008 ай бұрын
With the glue layers between the booster - does that mean the effect lasts longer? How long would this last roughly? 2-3 months?
@phill10418 ай бұрын
When does this drop!
@editionyoyo8 ай бұрын
Currently slowly making it through the machining process! Due to the complex structure of the single piece cap/ring machining of the production run has taken considerably longer than originally planned. We are hoping that the caps will be done soon and the rest of the process will go quicker.
@zhengyuanluo46238 ай бұрын
nice video, where is the over view for peregrine x though hhh
@UrbanZakapa018 ай бұрын
By the way, is the booster brush made from boar bristle?
@naupiimznau76188 ай бұрын
how to switch between responsive and unres mode? is it hard?
@SapphireGuzzi8 ай бұрын
Where can I buy genuine Haifu booster and DHS rubbers?
@philipyyfr19778 ай бұрын
tabletennis 11 and Prott.
@astamak25668 ай бұрын
If i use haifu regular and only do two layers should i do one layer booster, wait 2 hours. another layer, then glue onto blade?
@dantesalvucci23938 ай бұрын
It sounds so cool! cant wait to try it for myself
@editionyoyo8 ай бұрын
Really appreciate you taking the time to go super in depth on this design! Also thanks for keeping it real, explaining the design characteristics and how they function within the weight distro. Always top tier content and a real honor to have had your overview on this design.
@philipyyfr19778 ай бұрын
You are welcome!!!
@yahoo80938 ай бұрын
That name definitely came from Aespa
@aridnavleez8 ай бұрын
Can’t confirm this is not correct lol
@Solemn_Kaizoku8 ай бұрын
This might be my favorite video you've made yet! Thanks for making these detailed overviews. Also, I totally didn't expect "we're High School Musical-ing this" to come out of Philip's mouth 😂 Loved the subtle humor throughout.
@Solemn_Kaizoku8 ай бұрын
Any plans to restock the blue/silver fade or to releasing new colors? Going to have to get one of these for sure. I've generally preferred monometals, and I've been looking for something on the wider side.
@philipyyfr19778 ай бұрын
@@Solemn_Kaizoku no current plans on restocking yet but if it sells well I'm sure we will make a second run.
@topke56429 ай бұрын
Did you ever try H3 boosted on backhand, can that be a thing ? Tried once non boosted and my backhand was like dead. Flip and block control was good but speed was painful.
@philipyyfr19779 ай бұрын
I always boost my BH H3 37 or 37.5, same process as this one.
@robin16087 ай бұрын
@@philipyyfr1977 How many layers would you put on an H3 37? I'm afraid that it will become too mushy if I put too many layers.
@philipyyfr19777 ай бұрын
@@robin1608 the same process, just put thin layers.
@irshaddanish6147Ай бұрын
Painful means? Please explain.
@topke5642Ай бұрын
@@irshaddanish6147 It means that in order to play this rubber on backhand you have to be technically really good if not great and to match that with good body, that means fast, explosive movement. Ofc everyone can play it but the question is are you playing just for fun or you want to learn and advance so you can play against good players, if yes just go other rubber that does a bit more job for you and is not that hard to learn like NIttaku Fastarc, Butterfly Rozena I feel are the good starting point. After that you can go for more with like MXP or Tenergy 05. Tacky rubbers on backhand is not for hobby players its just do demanding.