These tires don’t carry the DOT label. There is a label for off road use atv/utv use only.

God it. Do you know of any DOT legal tires available for these? Thx.@@azsxsproject

I actually sold my maverick sport before I could make a video but light bar was amazing. Just about as bright as the custom headlights I made. You really could drive with just the light bar.

@@azsxsproject appreciate the quick response!

Thank you! Glad it was helpful.

Great question. I think as far as frame the machines are relatively close. Wiring might be a different story.

Looks like the only numbers on the rear springs is 005528

Ok thank you. That's the same one I was sent however I can't maintain ride height I have alot more weight on the back than you do.

@@BrianSmith-si4zd probably a dumb question but have you tried more preload?

If I remember right with the front clip off there are a few bolts to remove and separate the plastics. I’m pretty sure they can be.

That would be cool. I have only seen a few and it seems a bit harder with 4 seats. Not sure I trust my welding quality with my families life. I’m kinda holding out for a sick cage I designed.

Glad you enjoyed it.

@@azsxsproject seriously, awesome production and super informative. I was going to make a similar video, then I found this one and couldn't have done it better. Great job.

@@traildawgsoffroad5156 really appreciate that. Thanks.

Thanks for supporting! Means a lot. Glad you found the xp pro. That will be fun for sure. Yep I still plan to make some more content so stay tuned.

Here are the brackets I used. Off-Road ATV UTV Light Bar Mounts... www.amazon.com/dp/B082XKHYXL?ref=ppx_pop_mob_ap_share

I bought something similar to this for the lights. I just sprayed the brackets black and used some rubber washers on bracket to keep it from moving over time.

Lol thanks. You guys are always killing it!

Thanks for watching!

I actually don’t have those wheels anymore. I bought them before I understood about wheel offsets. They were a 0 offset which is one step past a 4+3. Too much steering feedback. I can’t speak for the durability of the coating but I did like the design. I am now running a method 409 wheel with bead grip at a 5+2. Wheels are super light and I can run low tire pressure without the need for heavy bead lock wheels.

@@azsxsproject yes I actually seen those on a newer video I really like the beef grip design but I don’t like any of the colors I’m looking for more of the brushed aluminum look like the vibe has but there’s not a lot of wheels with that look that will work. They saying it’s a 4+3 on the sight but a zero offset you would think would be a 3.5x3.5. I am a little concerned that will be a little much but my stock wheel is a 5+2 and since I’m raising it about 3” I wanted to add a little width. I really want a 15” wheel but the vibe wheel don’t have that option.

That’s a tough one. Yeah raising it three inches will make you a bit tippy but going wider will definitely wear out your steering and suspension parts. Right before I changed tires and wheel offsets my rear axles were starting to click from the increased width and rear being a locked axle. Since moving back to 5+2 I have had zero issues. Not to mention I took Shock Therapy’s advice and went with a rounded tire instead of the popular square tire. I lost a bit of planted feel for more of a controlled slide but I have also had zero issues with tires and I recently went on a trip to the desert and put 200 hard fast miles on it through some jagged rough terrain.

@@azsxsproject was your factory wheels a 5+2 as well?

They were actually more like 6+1. I gained just a bit of width with 5+2

I believe it’s right around 1in but the actual value is in the manual if you have it handy.

@@azsxsproject thank you for the response

Yes it can clunk sometimes when flexing for sure. It’s because the bolt that goes through the control arm is slightly smaller then the hole. It’s beyond me why it’s not a tighter fit.

If your trying to lock down the sound try disconnecting it and tying it up or zip tie it and see if the sound goes away.

@@azsxsproject ill give it a shot. Thanks!

Your very welcome. Glad it could help you.

Hmmm that’s weird. Let me give Mitch a call and see what’s up with that. Maybe they are waiting on something or maybe they never went through with making 4 seater kits. Hmmmm.

They have them now thanks. I bought a bandit utv set and there garbage.

Lol wow. Well I can’t take the credit for the idea as I saw it on a Facebook post but I thought I would make a video on it as I tired it.

That’s great news! Yeah I’m pretty happy with them. Machine rides great now. It did take a bit of time to dial it in to what I like but I had all the adjustments to do that. Thanks for watching also I appreciate it.

Thanks for watching and your comment. For the spring preload I measure from where the threads stop and top black cap starts. From there I measure down to top locking ring on springs. For crossover I measure from top of locking collar to bottom of the two crossover rings, the side that has the o-ring. Rear collar 2.5in Rear crossover 2.5in Front collar 1.25in Front crossover 4.5in

Thanks man. Hmmm not sure. I would check shock therapy website and if they don’t have them maybe call them and ask them if the sport springs can be used on the trail.

Thanks for watching and great question. 1in was good for my kids but you could go farther if needed. I was concerned about horizontal stresses by going higher. Maybe using a 2in square tube could be used also.

Thank you so much for watching. I actually haven’t got the blinkers going yet but it basically starts at one end of the strip and goes to the other end so the whole thing is solid orange. Then it starts over again. It’s nice cause it doesn’t matter what color your on it will always go to amber for turn signals.

I’ll try to get a video soon of that being finished up.

lol guess I should have looked at your other videos before asking!

Lol thanks for watching. The springs are by far the best investment I have made. It took a bit to dial them in but that’s what’s nice about them. Now I’m doing 40+mph off-road through rough terrain plus I have 10ply tires. Really impressed.

@@azsxsproject excellent. Definitely going to upgrade at some point

i guess Im asking randomly but does any of you know of a tool to get back into an Instagram account..? I was dumb lost my password. I love any help you can offer me

@Eugene Titus instablaster =)

Thanks for the watch. I believe this is the item I purchased. Flexible Car Led Light Strip - Multi Color 2 Pcs 24 Inches Daytime Running Lights LED RGB Kit Waterproof - for Car Replacement Switchback Headlight Decorative Lamp Kits and Turn Signal Tube Lights www.amazon.com/dp/B07VPT5ZG1/ref=cm_sw_r_cp_api_glt_fabc_ER065A6Z5TSB8J8SGF82?_encoding=UTF8&psc=1

Pretty much. I try to not focus to much water on the dash but just graze it.

You know that is a great question. I think you might be able to with some trimming of the plastic floor area. Maybe it would fit laying on its side but I’m not sure if you can do that with a battery. My plan was to add a on board air compressor.

@@azsxsproject 10 4,i need more juice.After adding front & rear windshields,roof....it got HOT in that thing lol.

I bet. I still don’t have a windshield and I keep saying I’ll get one but it’s nice not having one for summers in AZ.

@@azsxsproject found a pro vent on one of the FAKEbook forums for $250 shipped 2 my door,I HAD TO GET IT lol,b4 that i was like 'im never get'n a windshield if i gotta pay $1,000 for one 😂.And there are NO companies besides Yoshimura & MBRP ( which sounds like shit TO ME) making exhaust 4 these things either smh.And who in there right mind pays $700 for A SLIP ON?! 😂.All good though,all i want nxt is a HALO locker and a way to rig my roof fan up & im good 4 a while 😂😤.

You might have a broken roller. I would check there. The other thing would be a bearing that could be keeping it from closing. This is a bit beyond what I know but these are some solutions I have seen in the forums.

@@azsxsproject 10 4,we just got the Dalton kit,we're gonna try it out....THANKS! 👌😤

Dude love my dalton clutch kit. Didn’t think it would be that noticeable but the thing rips pretty good with only one person in it. Lol

@@azsxsproject Thats wassup,i needed to read that lol.😤

Thanks for watching. I wired to post under the dash. There’s a battery 12v, negative, and accessories 12v. I used all three in my application. No issue so far.

Thanks bro I think ima do it like you no problem at all with your battery or becoming hot? My cables are to short to connect directly to battery I could only do it to the bus bar

You looking for stock or aftermarket?

@@azsxsproject whatever you think works best ?

You know I am not sure but a lot of guys swear the the oem ones last the longest and work the best. Some use brass pads for if they do a lot of mud. Not sure on any part # as I haven’t had to replace mine yet.

Thanks for the comment. I would agree that all of them on feels better. Stock setup though did experience a better ride quality with front off and front shocks at 2 and rear at 1. Don’t remember what the preload was but with stock springs it road way better.

Correct if your concerned about body roll or rollover I would leave them connected. It’s personal preference though. I found that stock setup with front off and front shock on 2 and back on 1 was pretty decent to handle everything. With aftermarket suspension or upgrades the ride flexes way more to the point I don’t really even notice the bar connected. You may experience an occasional 3 wheel but it rides great.

Thanks so much for watching. Your support is appreciated and I’m glad the video helped!

Lol but so worth it because I saved a tone of money.

Lol yep. Glad it was helpful.

Glad you found the video helpful! Thanks for watching. 😃

For mounting the winch? I don’t think so as I didn’t have to buy one for this install. I did need some longer hardware to bolt through the lower front section you take off to install the winch.

With this setup I was at 64in width.

The shorter wheelbase probably won’t be as pronounced as the 4 seater.

My kids are 12 and 10. 64in and 54in.

Thanks for your comment. I actually got mirror from a friend who got it at a yard sell. Not sure but this one is pretty close. KKmoon UTV Rear View Mirror, Offroad Rear View Side Mirror 1.5" 1.75" 2" Universal for UTV High Impact Shatter-Proof Tempered Glass www.amazon.com/dp/B07Q292759/ref=cm_sw_r_cp_api_glc_fabc_EhL7FbM9MC0QD

Wow that’s pretty cool. Yeah I wonder how it will hold up. I have been running sway bar since I got shock therapy and I am very happy with performance. I almost can’t tell it off versus on now.

@@azsxsproject bushing pn# 706203594 sway bar pn# 706203595 in the case you decide to try it maybe make video 😃.. Paid 94.25$

Great idea. Thanks for posting info.

I’m not familiar with the DRS kit. I think and shock or spring upgrade is better then stock.

@@azsxsproject DRS spring kit. Dual rate spring kit from Shock Therapy is what I was referring to that we have on our X3....considering doing this on our Mav sport as well. I also agree way better than stock

Oh man...duh...lol. It’s been a day. Agreed dual rate is the way to go.

Thanks for your interest in the video and my ride. If your referring to the side mirrors they are Seizmik Pursuit side mirrors. Great company. I got mine from a yard sale but needed profile cage mounts. Called company and had them at my doorstep 2 days later.

No problem. Glad it was helpful.

Thanks for your comment. Are you referring to the amber pod lights on the front?

@@azsxsproject yes please

Wiring harness: Nilight LED Light Bar Wiring... www.amazon.com/dp/B071ZPX32N?ref=ppx_pop_mob_ap_share Mounts: Off-Road ATV UTV Light Bar Mounts... www.amazon.com/dp/B082XKHYXL?ref=ppx_pop_mob_ap_share Lights: 3E LED Yellow Driving Fog Lights 2Pcs 3Inch 40W Waterproof Driving OffRoad Work Lamps For Wrangler Offroad 4X4 Auto Car Jeep Truck ATV UTV Boat Motorcycle bait www.amazon.com/dp/B07ZT62VV8/ref=cm_sw_r_cp_api_i_RkxOFbMCDM0WN

Oh and the switch: ESUPPORT 12V 20A Bar Push Button... www.amazon.com/dp/B019679ML0?ref=ppx_pop_mob_ap_share

@@azsxsproject i can't thank you enough, they look great I'll do the same to mine come back soon i put a video and tag you, thank you so much for the help