Пікірлер
@RichardMillet-RM 5 күн бұрын
Installed mine months and months ago before this video existed. Great sounding horn!
@human_cabbage 3 ай бұрын
Hands down the best & cleanest install video for a Rivian running board.
@fengfu2330 4 ай бұрын
Just too expensive.
@arya_jahan98 4 ай бұрын
Your link directs to a 404 page lol
@AsterDreamweaver 4 ай бұрын
Which grade of impact wrench did you use? I am finding mid torque and high torque options. Would the mid torque like the Milwaukee 2962 (650 ft-lbs breakaway torque) be enough to remove the frame bolts or does it need the high torque version? Thank you.
@brettsiciliano2037 4 ай бұрын
How much? Website? Thanks
@raghs4001 4 ай бұрын
2024 R1S passenger side install is little bit tricky, need to remove 6 T20 screws of the wheelwell and then you will be able to locate the factory horn. Also make sure the connection behind the horn are plugged in correctly mine was loose and was not working. Spend 44 minutes to make all wires were connected properly and then found out the wire was loose.
@talhariaz8347 5 ай бұрын
Im pretty sure it blocks the camera completely from front view
@carlosvega8417 5 ай бұрын
No good
@E_Wumi_V 5 ай бұрын
Hi RealWheels EV, I love your content! I'm interested in discussing a potential collaboration. Could you let me know the best way to reach you? Thanks!😊
@ReevansElectro 5 ай бұрын
Come on now, it is a metric truck in a metric automotive world an you use British engineering bolts and nuts???
@srqTactical 5 ай бұрын
Should use this design to make the ultimate bug defender
@dwdrum1 6 ай бұрын
This looks absolutely so fucking stupid I can't even begin to count the ways
@getrealzx 6 ай бұрын
Great, added for what?
@joeybayer4460 6 ай бұрын
What is the point for this add on?
@lazerusmfh 5 ай бұрын
to make your truck look stupid? idk i would never put that on my truck
@conantdog 6 ай бұрын
The first time ot gets bumped by another vehicle the bolts will snap,. Ugly .
@rbfarrell1 6 ай бұрын
The deployable running boards would be nice.
@formytots0128 6 ай бұрын
Do you need liquid loc-tite to ensure that the bolts do not become loose over time?
@adammcwilliams2803 6 ай бұрын
That’s horrible looking
@iarts 6 ай бұрын
Why is this bar tubular in design while the cyber truck is angular? The design looks terrible and out of place. Thanks but no thanks!
@musk-eteer9898 6 ай бұрын
bumper for bumper
@rayc.8555 6 ай бұрын
2 3/8 dia bolts holding it on? You have got to be kidding me. That thing is purely cosmetic.
@reviewsandstuff4447 6 ай бұрын
This is absolute garbage 🗑️
@akila219 7 ай бұрын
you need one for the tow truck as well
@billhamilton5230 7 ай бұрын
Good video and good product! I added these to a 2024 R1S and panel 3 had no ribs. (Panel 1 does not have a second rib.) If you’re adding to a R1S you’ll have to dry fit panel 3 and mark the location of the ends of the bracket. Alternatively, use can use panel 2 to locate the drill locations on panel 3. Also, pay attention to which end of the panel they are measuring from. Measure twice, cut once!
@christophersinsabaugh9795 7 ай бұрын
Got mine today and installed it. It was ‘almost’ as easy as the video. The clip on the frame gave me a little trouble but overall very happy with the product. Sounds great.
@AI-Driven-Entrepreneur 7 ай бұрын
Wonder how much range is lost with these.
@notsecure 7 ай бұрын
Good question!
@RWC-EV 7 ай бұрын
@@notsecure @AI-Driven-Entrepreneur Thanks for the question. We have not noticed any change in range or efficiency. The Rivian community has been adding running boards for a couple of years and have the same results, not real change compared to not adding the running boards.
@my1vice 7 ай бұрын
100K and it doesn't have them already? hahahaha..... One born every minute, I guess. Ellen is such a scammer.
@wellrounded9757 7 ай бұрын
Love these. ❤❤ Wish they were more competitively priced. I would expect to pay $1,300+ for automatic running boards.
@RWC-EV 7 ай бұрын
Thank you for the feedback. If we made them using regular carbon steel they would be less expensive, but they also wouldn't last the same way that these will being stainless steel. These will last as long as your Cybertruck does basically worry free.
@fieldsfury 7 ай бұрын
Very nice! Would love electronic deployable version as well.
@brittanysaulsberry3912 9 ай бұрын
Thank you
@jasoncoryell2369 9 ай бұрын
Great video! Very easy to understand. Great job with the amazing design. I will be ordering soon
@AaronGajadhar 9 ай бұрын
Thanks for the clear, detailed instructions!
@jayliu645 10 ай бұрын
Thanks for the video.
@ajjenkins6595 10 ай бұрын
Just bought one for my R1S. I bought the dual horn wire version. Any tips for that one?
@JuanAlvarez-ig8ws 10 ай бұрын
You guys should sell the harness, as stand alone kits for those of us that already have a second horn on hand. This is awesome
@Sickleficker 10 ай бұрын
this video was perfect guys! thanks so much for putting this together and R&D'ing that harness; now i'm not embarassed to honk my horn!
@josilver 10 ай бұрын
Video instructions worked well, much easier for me to follow than the printed instructions, thanks! For anyone watching deciding if this is a good buy, go for it! The bracket and pre-wiring was very well made and convenient. Sure, you could DIY a little cheaper but it would take longer and require a lot of tinkering and fitting; totally worth the small premium. The sound of the horn is much deeper than comes across in this video and the other reviews I’ve seen online. I like it. It’s like a deep train/truck horn.