What does everyone think about that your baby should be in it for 30min then 15min pauze and so on,is that to much or to short?
@Mazza6662 ай бұрын
Spewing this wasnt my issue. Ive diagnosed mine to a broken wire. Specifically the one that goes to the front display and opposite end of rocker (last wires). i tried looking for a replacement loom, they dont sell them. Display end is plug in, opposite end is soldered 🤦
@kerrieolea25102 ай бұрын
What kind of o ring is it
@draynged78694 ай бұрын
Too bad it was recalled... Either way this may be handy for other versions! Thank you!
@KristenBoyens4 ай бұрын
My swing and bassinet are moving until about 15 plus pounds are put in and then it flashes and stops...has anyone else had this issue?
@BonBu-ti3qp4 ай бұрын
s
@andrewgancinia5 ай бұрын
The gears work well Mine might just be a computer chip problem. Is there a factory reset?
@robertlopez81545 ай бұрын
Mine makes a knock noise every time it meets in the middle. I think because my toddler got on it. That’s when it started.
@TibinM6 ай бұрын
Thankyou so much.. I repaired myself and it's working properly now thankyou 🎉🎉
@manka33007 ай бұрын
Wher i get ring?
@asaditron7 ай бұрын
What size O ring did you get from the hardware store?
@aminorerror8 ай бұрын
I wonder how long this fix lasted?
@rudycastro79659 ай бұрын
If I hold the seat lever release half way, the unit works great and won't stop. But if I take it all the way up or down lock, the unit stops moving.
@trotterstips96 Жыл бұрын
How on earth did you get the white base back on? I tried for hours and hours trying to put back those long screws into the white base that moves, and could not get it to attach.
@ColinGrimm-qg1nfКүн бұрын
Same!! Such a pain getting the long screws to align! I ended up getting them in and I think the main difference maker was OPENING THEN LOCKING-IN THE PLASTIC LEVER ON THE BACK (the part that allows you to change the seat angle) This got everything pretty close to aligned, and then it only took a couple tries to get the screws in 🙌😅 Hope this helps!!
@barracudaaa7925 Жыл бұрын
Teşekkür ederim 🇹🇷
@robfrank718 Жыл бұрын
left out an important step.??
@lindiwelungu4035 Жыл бұрын
Thanks l just got finish fixing for my baby 😍 it’s now working perfectly 😊
@michaelklein3244 Жыл бұрын
Mines making a poppong noise as it swings when hes in it. Not so kuch when its empty and running but if theres weight in it it POPs at the same point every rotation
@TheyMakeItLikeThat Жыл бұрын
What size o ring did you use?
@no_one3172 Жыл бұрын
Way to speed up this video and skip parts great job
@elizabethjimenez1581 Жыл бұрын
What size O ring did you use?
@sandramurguia7302 Жыл бұрын
Como puedo arreglar el mio si no hace la función de subir y bajar , solo se mueve de un lado a otro todos los movimientos en la misma dirección?
@kayladavault879 Жыл бұрын
My swing was doing the same exact thing I took the whole thing apart, and nothing was wrong with the rubber band piece. I ended up throwing the whole thing away because when I took it apart, I couldn’t get it back together.
@khanbarfuss2385 Жыл бұрын
We got one gifted to us that had been through three other kiddos before we had it. After a move we noticed that slipping noise and the obstruction warning. Followed this video and that was exactly what was wrong - belt had stretched out. Put an O-Ring on and works better than when we received it! Thank you so much!
@michaelklein3244 Жыл бұрын
Was it popping as it moved?
@alexandria5575 Жыл бұрын
Wow you are so smart! Thank you for this video !
@ItsMeDeeDee Жыл бұрын
I had same exact issue! I ended up just upgrading to the newest one
@emilytaylor7650 Жыл бұрын
Hi please help!! What size screwdriver did you use
How do you order that part and where can you get it?
@KredOwens2 жыл бұрын
Omgggg I’m going to do this right now because that is what mine keeps doing !!
@TRawwAz5202 жыл бұрын
Going to try this you are Doing the lords work 😅
@luisalbertohernandez6892 жыл бұрын
Muchas gracias, me ayudó mucho el video, pude reparar mi mecedora. En mi caso la banda estaba bien pero gracias a que muestran como desmontarlo pude encontrar la falla del mio, solo se había salido de lugar una corredera, es decir que ya no caminaba por el riel, solo lo puse en su lugar y quedó a la perfección. Muchas gracias por el video. Saludos desde México
@matthewboechler2 жыл бұрын
My O ring was fine. The issue mine was having was it was giving obstruction code as well. I took it apart like the video showed and cleaned out the gears near the motor and the track the device runs along. Hair and debris was twisting around the gears causing it to seize up. Great video
@jessicasalt52052 жыл бұрын
oh thank you so much for this!!!!
@eminariebock22712 жыл бұрын
O ring size: I used a 1 3/4 O.D. x1 9.16in I.D ring(#38) and it was a perfect fit
@eminariebock22712 жыл бұрын
@Ayesha Juma any hardware store..ace hardware, lowes etc.
@jakecampbell80012 жыл бұрын
I bought this exact size o ring and the I.D was a little too big
@andreargove2 жыл бұрын
It seems like this product is super weak. We all have the same issue. I really appreciate your video and tips, your time to teach all of us how to fix it. Thanks again
@sugia31752 жыл бұрын
Thank you for the video. Mines does the same thing, i tried returning it but the 30/60 days return policy had expired.
@alekycraes34422 жыл бұрын
Yes I’m having the same pronlem
@peternee96412 жыл бұрын
Anyone have the issue where that it doesn't turn on at all? No error code - nothing? Thanks
@timlarson11422 жыл бұрын
Good video. You need an electric screwdriver. Haha. Check out the Skil on Amazon
@nightrider54202 жыл бұрын
My wife an Neo Nadel intensive care nurse brought a momaroo home for me to fix, Lucky me and thanks to your vid your charming wife showed me how to snap the cover off the, Something I wouldn't have tried unless I saw it done. The unit would run for one cycle then STOP but the belt was fine so being an electricain I figured that the motor software was sensing too much resistance. I took some light oil and oiled EVERY moving part, pivot point, and shafts and when I pressed start it worked as good as new. Seems the company was very stingy with the grease and what was applied at the factory was dry and dusty. I hope this might help someone out and thanks for making this vid. BTW the blurred pic on the wall behind you looks EXACTLY like my son no lie.
@savannahwade8202 жыл бұрын
I’m sorry if this is silly but what kind of oil could I use?
@nightrider54202 жыл бұрын
@@savannahwade820 You could use any light weight oil from a hardware store. You can even find it in a small syringe looking container that will help you get the drops of oil into those tight places. Basically you want to put a few drops on any pivot point or sliding point and that will reduce friction greatly.
@shanejoslin36182 жыл бұрын
Can we use WD40?
@savannahwade8202 жыл бұрын
@@nightrider5420 thank you!!!
@leesimpson9095 ай бұрын
Hi, what oil did you use, I know there's some oils/lubricants that can't be used with certain things so just wanna make sure I don't do that
@stephaniemendez25282 жыл бұрын
Excellent video thanks you for help me!! 🙏🏻🙏🏻🤩🤩
@Xandertank20102 жыл бұрын
my mamaroo was working fine and suddenly stopped working, it won´t turn on. Do you have any idea why this happend?
@daviddelacruz8022 жыл бұрын
I did this but my band wasn’t torn, I cleaned the sensor but it’s still not working!
@yuckfou14342 жыл бұрын
How did you take the base off though? It just shows how you took off the middle part but I can’t take off the piece around it (base with buttons) off, the screws did nothing since I can’t take off the base 😭 I’m going to break it on accident I feel ):
@nei_hmande24273 жыл бұрын
Stupid. Pay all of this money and they use the cheapest parts possible and then you have to fix their company’s problems. It’s absurd how expensive it is and how quickly it fails. No wonder they’re on 67% off sale. They’re garbage.
@Alicia-zk3nn3 жыл бұрын
OK FAT MAN K
@cherylann95143 жыл бұрын
But how did you remove the two other screws on the base? Idk what kind of screw to use to take it out.