Sloppy work pal.

I love your explanation and neat work! That said however, I would add two things: (1)The lugs on the main lug and main breaker load centers will use a 3/8" Allen (hex head) wrench and should be torqued to 250 lb-in using a torque wrench. (2)Never put two white neutral wires under one lug or you will fail inspection in our state.

Is concrete good for mass? I see many people use cob, but this looks tidy and neat 👍🏻

Important tip is to drain the battery to about 11.8v. and then charge. Better if you do it with 240 v. prolly. Bigger bangs on each discharge, though I just did it with 120v.

One neutral wire per each screw. Not 2 under one screw.

I did not fucking know that as soon as you said the store would cut it for me I went right the hell back

Great video, thanks so much

Didn’t show how he was going to do the ground to the ground bars and water metal pipe. The big ground wire he tide to the panel, this one comes directly from meter so he need it to run a #6 ground wire to the bars and connect the water pipe for better ground. Did he miss that? Hope he can respond to my comment.

Thank you Sir 🎉

Cheers ❤

Manual was missing, I have to search on you tube how to install😂 Thanks so much!

would it work if you just connect the neutral wire to top, in parallel with the hot wire for disposal switch? This way, you don't have to break any tabs. Also, I would recommend using a red wire for hot side, not a white wire 😊

I had to watch it a couple times y my thank u 🙏 the other videos are in 14 3 an they confused the dog shit out of me

Thank u

Is there a way to attach or an adapter for this saw to put one if those diamond infused blades with the circle in the middle instead of the diamond shape? I am trying to install a saw blade that produces a polished cut like the saws they use to cut geodes and gemstones in half and they look smooth, not choppy or jagged cuts. My problem is that the 7" blades the stores have like the Makita precision blade and the DeWalt XP DW4760 Ceramic Tile saw blades have a circle in the middle instead of the diamond/rhombus shape that the saw spindle and the blade that came with the FlexVolt came with. Or is there any attachments or adapters to replace the saw spindle/arbor so that I can use these blades? Or is there a way to attach it to the FlexVolt saw as is? I am using my saw to cut stone but I am seeking out a blade that can give me a nice polished cut. Please help, I am very frustrated. Thank you.

Thank You Firefighters For Your Honorable Service. 🔥🚒🧯👨‍🚒

I have one installed on my jeep wrangler 2 door. It plows very well. I've been plowing snow since 2010 here in north central indiana. The jeep is much more maneuverable.

Put the keeper pins back in, and the plow won't come off when you pile it up.

Nice video do appreciate it. I was curious why there’s two neutrals and two hot. Is that to run in series to the next outlet?

Cool! Thanks for sharing this. I think I accidentally ordered my faux wooden blinds a 1/4 or 1/2 inch too wide and I'd really like to avoid having to send them back.. Would a circular saw work for this?

Thank you for posting this! It is so helpful. We recently added trim to our windows and the existing blinds no longer fit. Can't wait to try!

This was very helpful... thank you !

Amazing video. Thank you so much for posting

Thank you I will have a go at doing this now I have seen your video, I will let you know how I get on.

Not sure about the code where you are but they don't allow double tapping on the neutral lugs especially when you have plenty of spaces to put them all individually also not allowed to use drywall screws to secure a panel here they have a raised sharp edge and no fire stop foam on the wires coming down from above Through the Wood

what about the bracket? Should it be cut a little smaller due to the bracket for it to fit in?

I’m in a similar situation, BUT i need your set ( one on a switch for food disposal and one hot all the time for rear speakers) I have a surround sound and my rear speakers sit perfectly behind couch on island. I did all the drilling and come to find out, my speakers only power on when I turn on my food disposal.

Thanks for the help. I hate reading manuals. Great step by step

Great guidance 🙏

My tension dial won’t turn to the right to tighten the chain and when going backwards it makes a hard clicking sound. Any idea what’s going on?

Light is always good with video... can't see wiring at end

Excellent video. I learned all I need to know to get started with mine. Addressed everything anyone could want to know before getting started. After seeing the cuts you made with it, I am thilled to know that I did indeed make a good choice when I purchased mine, as it will be more than sufficient for any trees i want to remove on my proper or after the frequent storms when I need to clear tree limbs on my Louisiana property.

Great video man

Thank you!!

Can these also be used with a Thudbuster?

Looks like you did this with your eyes shut. Not precise at all. The pen line was incorrect, the cut was incorrect, the slats weren't clamped. That is a hack job

Obrigado pela dica

This is wired like a sub panel, is the neutral/ground bonding done at the service entrance?

That's not a plug you idiot

The proper way to install line is to turn the grip cover ( larger diameter part closest to shaft) counter clockwise while holding the part you tap stationary, this is in manual

Sloppy.

Thank you!!

Just bought that saw and used for several hour in the rain. Manual melted. Thanks. Very large oak tree is on my friends house. Bringing a made in West Germany Stihl with a 20" bar tomorrow. Plastic Dewalt would not be my go to but works with a sharp chain.

I cannot get the wi-fi to accept my phone number . Cannot complete registration. Wi-fi will not work.

Super very nice video ,thanks!!

What about the oiler? I bought a different model Dewalt electric chainsaw and in a few months the oiler no longer worked because it was very poorly designed! What good is a chainsaw without an oiler?

Explained perfectly. Thank you. Helped me out much

Don’t want to piss no off but you don’t need to use NOALOX anymore for aluminum wiring for like the last 30 years we perfected the aluminum alloys in it. It’s not like how it was back in a day.

Worst air conditioner I've ever owned. Doesn't operate when it's hot outside and you actually need it. The first one they sent broke in less than a week, compressor went bad. Second one compressor hasn't gone bad, but the compressor shuts off after the unit runs for about 10 minutes and stops putting out cold air. So as an air conditioner it's Useless. Plus it said online that it's a 12,000 btu unit. When it arrived, the sticker on it says it's an 11,500 btu ASHRAE and 7,400 btu SACC. Which means it's only a 7,400 btu unit and is a piece of Junk. Don't expect to stay cool with this thing or you will die from the heat. I hope this company burns to the ground and goes out of business.

Great video. Much easier explained than many of the others I looked at when I first bought this thing which I really do like. My poor ole Stihl doesn't get used as much anymore...