Never test a new outlet with a hot stick.. that’s not ensuring you have correct voltage.

This is cool

Prioritzing look over function

The Corro-Protect unit is quite expensive. Most likely within the 20 year warranty period of the unit, other unrelated problems will arris with you'r water heater ie, thermostat, over temp protector, pressure relief valve, etc. With this in mind, and the price of the Corro-Protect, you would be better of purchase a couple of standard Anode Rods for $19 which last from 8-10 years where I live. I will keep a spare and just replace mine in 6-7 years.

You can also use Schlüter-SCHIENE-V trim to recess the drywall around the cabinets. It gives a modern look by combining metal and wood along the reveal edge.

Great work, but personally I’d prefer if the door fronts are flush against the wall👍

The most unneeded invention in history, which is why you only see it on channels like this. If you can't tape up to a corner, this isn't going to help, in fact you now have a huge paper surface you need to get mudded perfectly into the wall, which is worse than a 1 inch piece of tape.

vibrate the edges

Was having the same issue. You're tips did the trick! Thank you for posting this video.

Forget the chalk!...look at those bathrooms😮...beautiful😊🎉

Wait,where did you get that baby paddle?

Yo bro great video! Side note, what kinda pants you rocking my guy? Im desperate need of a new cargo pant brand

I laughed my head off...brilliant stuff. I keep watching it over and over again.

How much did the door frame cost?

😅😅👿🇹🇨

Home owners can do their own work without being a licensed electrician. They just need to have it inspected.

😊

One thing I like is thenuse of Wagos! Too many North American Sparkies balk at using Wagos, but they are the what European Sparkies have used for decades!

All that work and you neglected to run an ethernet cable! Wired > Wireless! Unless you need mobility/portability, or running cable is not feasible (and if you ran a cable for power, it most certainly was feasible ro run a CAT-6 cable) always go wired!

Please don't install outlets like these with USB charging ports! Technology standards change too often to make these things worth using. The same goes for funiture with built-in USB charging ports. We don't know if USB-C will be the power and data standard in 10 years, and even if it is, this may not support the current protocol version/standard for USB PD (Power Delivery) meaning it may not be able to negotiate the proper voltage and current for the device you want to charge....or at worst, you'll get "slow" charging (slow in quotes as it's relative to how fast the device should charge with the proper charger at the time). This is another example of customer demand for things they don't understand because of poor customer education.

It’s always annoying when a GC has a half ass plan going into the build/remodel. It shows lack of experience and costs the GC and all Subs money if they don’t play their cards hard against bs.

American homes are made out of paper, literally.

Also thought it might be worth mentioning that there is a new revision of this M210 out - i just got one early this AM and the key difference is that it throws up a green LED sensor on the true-center of the stud which is a nice feature. - I just spoke to customer service @ Franklin Sensors to confirm as it's apparently only listed in the tiny print in the documentation that nobody ever reads.

not sure if anyone else mentioned this already but you don't take the battery cover off to access the pencil - there is a cutout spot on outside - bottom right where you can slide it out with your finger.

You can get silicone on a ton of colors to match your job.

After owning many homes and having 4 built from scratch I can honestly say I hate drywall.

😂

Why the metal box and not a plastic?

Which brand and type of mud mix do you use? Cheers!

He ain’t lying

Soso dope 🔥🔥🔥🔥let's go

Oh ive got pride in my mud.......thats why i have four kids 😂😂😂😂

Very nice job! Thanks a lot for sharing!

Can these be used for a kitchen vent?

"advanced mud pan" lmfao

Just watched COUNTLESS diy radiant floor heating vids and THIS is the ONE I've been searching for!!! I don't see why this process would not work over existing concrete basement floor, unless I'm missing something???

What really turns me on about this idea is that it possibly makes the paint more sandable, which would not only allow one to achieve a perfectly smooth final finish, but to also match that finish in the future when doing touch ups, simply by sanding with the same grade of sandpaper you used previously, blendling the touchup to the rest of the wall. What can you say about other performance parameters? Like scuff and stain resistance. Adding chalk material like joint compound would increase the porosity of the paint, so it would be a good idea to apply some sort of wipe on finishing coat, I'm sure.

It would be nice to see it work with the wires in the box.

👍

Looks good- I was expecting the 210 to be a $150+ device

Frog tape works really well, also learning how to edge.

Very European.

wait wth is mudding?

Love it. Commenting to comeback and do this on my tiny house in the upcoming weeks! Great content.

Do you paint the board with a brush or roller?

Great idea but where do you pick them up at Home-Depot

Omg cleaning all those grout lines

Nice inspiration

omgee if you get invited to dance by a princess, you have to accept!!

🎉.