Richierock1

Пікірлер

@JimsNBHomestead 2 сағат бұрын

Is 80ft pounds troque in the manual ? Thats what i went caliper to spindle

@assetallocationshow8629 Күн бұрын

What a messed up way to fill and check transmission fluid. How about just a drain plug, fill plug, and dip stick? 🤦🏼‍♂️

@nikyromero Күн бұрын

I would like to know the specs of the compressor bolts

@mrfada916 2 күн бұрын

You rock brother. Appreciate the video

@SakibAhsanTamim-k3q 2 күн бұрын

Hello "Richierock1" I saw that in your channel have some problems. For these problems your channel is not much growing. Not getting much engagement. If you can solve these problems, Your channel will get more engagement. If you can give me permission I can tell to you about these problems. Can I tell here or email?

@MaksimVayn 2 күн бұрын

After replacing air suspension compressor, about 30 mins later I got this code C15A0-13 “ Air suspension reverse valve 2 control circuit open”. Please help. Everything is connected, fuses are ok. The code instantly comes on when erased.

@richierock1300 2 күн бұрын

@@MaksimVayn did you replace the valve block also that bolts to the compressor

@MaksimVayn 2 күн бұрын

@@richierock1300 I did not

@MaksimVayn 2 күн бұрын

@@richierock1300 it shows circuit open message. Wondering how it would relate to the valve block

@richierock1300 2 күн бұрын

@@MaksimVayn well it says reverse valve control open I’d say it’s the block

@AFatherToTheFatherless 3 күн бұрын

Don't hit the back of the rim with a sledgehammer wth hit the rubber tire

@hotpuppy1 3 күн бұрын

Not a bad idea, but to get more accuracy, you can hold a scribe to the tread of the tire and spin the tire to make a line all the way around on both tires. Measure from that marking on the tire. That way you don't have to worry about any wobble or bumps on the tires.

@donramon2501 3 күн бұрын

My guy the truck waisted alot gas shakes you think because of this problem

@richierock1300 3 күн бұрын

@@donramon2501 scan it check out the fuel trim

@rama7654 4 күн бұрын

There’s a problem if you change all the motor ??

@richierock1300 4 күн бұрын

@@rama7654 have to get it programmed

@rama7654 3 күн бұрын

@@richierock1300 how do i know it want programs or not, and can you tell me the issues without programs. Thanks for your help

@richierock1300 3 күн бұрын

@@rama7654 if your just doing the coupler your fine if you replace motor or column then needs programmed if will let u know if it does light comes on

@rama7654 3 күн бұрын

@@richierock1300

@inkspill9189 4 күн бұрын

Thank you so much I don’t have a 4x4 but it is so hard to find this process when looking to replace rod bearings

@davidv775 4 күн бұрын

Thankyou

@rayg7055 4 күн бұрын

Do you have to program the switch?

@richierock1300 4 күн бұрын

@@rayg7055 no

@craigbahr1343 5 күн бұрын

Okay

@user-cx7vb6xo7b 6 күн бұрын

Would snugging them down gently be good enough if you don’t have a torque wrench? and do you really need that grease?

@richierock1300 6 күн бұрын

@@user-cx7vb6xo7b no grease fine torque give a little umhp

@user-cx7vb6xo7b 6 күн бұрын

@@richierock1300 what does umhp mean?

@richierock1300 6 күн бұрын

@@user-cx7vb6xo7b that’s the grunt noise you make when you pull your ratchet

@harveyjoneswoodsman5956 5 күн бұрын

Not to much grunting tho 😅

@johnb9394 6 күн бұрын

lol using the tire to measure toe in..

@damienfauolo6613 6 күн бұрын

Is there a gasket or did it use rtv ?

@richierock1300 6 күн бұрын

@@damienfauolo6613 grey etc with couple orings for oil passage to pump and filter pretty sure

@SamS-w6t 8 күн бұрын

How long does take you to take the connector out?? Ive been trying for the passed 20 minutes with my screw driver still does want to come out

@richierock1300 8 күн бұрын

@@SamS-w6t look at the new one see if you can get a better idea of it

@shultsitify 8 күн бұрын

Thanks

@jerrycallo 9 күн бұрын

I would have thought after the sleeves were cut in 1/2 the bolts could be knocked out. Those things are really fused. I'm not sure I can tackle something like this but I know if I did that control arm would be in pieces. My upper ball joint is bad and it's a ball joint control arm assembly. No option to change just the ball joint. And yes it's not an issue to chop up a part you have to change anyway especially if it's to save a part you can reuse.

@richierock1300 8 күн бұрын

@@jerrycallo maybe spray them down monthly with penetrating oil

@jerrycallo 8 күн бұрын

@richierock1300 Thanks, problem is I broke one bolt off so I can't drive the car until I get that one out and a new one in. I used freeze-off by CRC on the other bolt which is absolutely amazing stuff 15 seconds of spraying and hit it with an impact and the nut came right off (I went right back to the parts store and bought 2 more cans to keep on the shelf, amazing stuff, smells like Kroil so it must have the same or similar penetrant). But the bolts are still seized in the sleeve. I'll keep spraying it down but I'm guessing there's going to be some cutting going on eventually. I hit the bolt with an air hammer to try to push it out and it didn't budge. Just a matter of whether I'm going to do the cutting or find a decent mechanic. Upper control arm so I don't have a lot of space and plenty of plastic parts nearby. The video really helped show what's involved.

@jackedling4013 9 күн бұрын

Thank you 😊 very clear and detailed! Nice Job!! It GREATLY helps us driveway mechanics save a lot of time in the sequence & details !

@thesillyquestions 9 күн бұрын

how are these doing?

@richierock1300 9 күн бұрын

@@thesillyquestions good still work on the truck

@castforward 9 күн бұрын

Perfect thank you

@Roy-fanof9 10 күн бұрын

Thank you

@Olhead718 11 күн бұрын

Thank you sir I just needed a quick reference you made it simple in less than 10 minutes

@rebeccaoakes9960 12 күн бұрын

Ty so much. Straight to the point. Had my jeep fixed in less then a hour. Also love u told me what tools to use. I subscribed ❤

@rogerdavis2056 12 күн бұрын

I find it easier just to measure the tow link before removing then match up when installing.

@erwinpadgett1050 Сағат бұрын

Yep. But it still isn't right. As you are guessing not confirming it's correct.

@Blackcat0330Channel 13 күн бұрын

Thank you so much. I've been looking for a video that's identical as my dakota.

@kromik6965 14 күн бұрын

Хороша робота!)

@nxtup- 14 күн бұрын

Same thing with mine just having trouble finding the sub frame and which one will work n people talking about the aluminum ones dont fit on the 2007 g35x and also any problems after you put it in ?

@richierock1300 13 күн бұрын

@@nxtup- go into description and it shows you which one to use. They’re all over the place. I got mine from Arizona on eBay.

@richierock1300 13 күн бұрын

@@nxtup- 2009 to 2011 g37 fits perfectly

@nxtup- 9 күн бұрын

@@richierock1300thank you just got a g37 sub Frame for it hopefully everything goes well

@richierock1300 9 күн бұрын

@@nxtup- worked fine

@MattBurnell 15 күн бұрын

and yes WD 40 and pentrating oil soak of the knuckle joint does work in the interim.

@MattBurnell 15 күн бұрын

after tranny serviced by good shop and i changed rear diff fluid i still am hearing a whining sound but not as bad....not sure if it is tires or tranny or rear diff are about done....i guess i will find out 260K lord i can't afford a new truck

@MattBurnell 15 күн бұрын

had transmission shop change out with my new part while i had transmission serviced. still seems to be stiff when i start but not as bad

@mlipsey66 15 күн бұрын

Your video was very helpful, I was able to do it without taking the wheel off due to my long ams. But still had to get the creeper out to really get the bottom bolt tight. Thanks again. Very much appreciated.

@tomb5509 16 күн бұрын

Thanks for this super informative video, about to do mine tomorrow and this cleared up my confusion.

@raybouton2917 16 күн бұрын

This is how a diy video should be. Directly to how its done. With no bullshit weather reports or suggestions on using surgical gloves. Damn good job.

@MrSilver708 16 күн бұрын

Wow!!! I have tons of angle iron laying around and I never thought of this!! Well done! Im going to try ut this weekend on my Pilot. Btw....I made my own wheel plates. 4 squares of plywood wrapped in tin foil or cellophane...smear a ton if grease in between and lower the fron wheel on them. Works perfect! 😊...thanks for the video!

@ovwok 17 күн бұрын

Only need to remove the passenger side bolt and the rear driver side differential bolts. It will come down enough to remove the pan.

@YuriiB 18 күн бұрын

Maybe you know is there any differences between regular Taurus and police Taurus racks?

@richierock1300 18 күн бұрын

@@YuriiB they say different

@hectorfuerte9664 18 күн бұрын

Gracias

@Michael-lm2du 18 күн бұрын

Did you have to engage EPB service mode?

@richierock1300 18 күн бұрын

@@Michael-lm2du nope

@Stonehopper1067HMG 19 күн бұрын

I would’ve been nice if you showed how you actually adjusted the tie rod. It does not look like this very much room to do this comfortably.

@richierock1300 19 күн бұрын

@@Stonehopper1067HMG I was just trying to show the tool you can use to adjust toe then kinda explained what to do if you like to see the tie rods it’s on Peter video of rack replacement on a Saturn hopefully that would help understand middle of video before installation

@lamontbryant1792 19 күн бұрын

How's it going Buddy, listen that was the best explanation I have ever seen on how to remove and replace Brakes and Rotors. Job well done thank U!

@Chicago_Clout 19 күн бұрын

You talk like Norm McDonald.

@BrettMeyer-ig3nd 19 күн бұрын

Awesome 👍

@benschlack5814 20 күн бұрын

Thanks for the video, I just got done doing one, it sucked ass!!!

@SportsMusicCars 20 күн бұрын

I have a 2008 XR with 143k on it. Best car I've ever owned!!

@SportsMusicCars 20 күн бұрын

@philbare 20 күн бұрын

WITH YOUR VIDEO I WAS ABLE TO CHANGE MY ALTERNATOR, NO ONE ELSE MENTIONED THE NEED TO MOVE THE SLEEVE BY TAPPING WITH BALLPIN HAMMER BEFORE THE NEW ALTERNATOR WOULD FIT INTO POSITION

@QaysAbbo 20 күн бұрын

You are amazing, thanks for the video, problem solved.

Ең жақсы KZbin

Пікірлер