This is the best explanation I have seen on basic vehicle ac systems. Love the diagram reference with the pressure readings

Couple os spanners and a screwdriver and I can fix my 1962 Morris Minor 1000 myself. It's registered as a Classic so cheap to operate. Depreciation, what's that.?

Plasti dip vs Bedliner ?

Great vid! Did you have to pair the remote? I cant get my remote or app to pair with the roof.

Why can you not just turn the key and take it out. Will that not hold steering wheel in place????

Please adjust your mirrors lol

I’m on same drop 2/4 but I don’t like that is lower in front then back , can I cut 1 or 2 inch on spring ?

I put two coats of clear on mine

Home Depot Black Friday 2024 by 2 5amp hour batteries for 199.90 comes with a charger get a free M18 inflator

Thanks for this video. I'm spraying my 2011 Ram 1500 this weekend. I got a quote for paint from MAACO which was more than I paid for the truck! I'll be about $400.00 in because I'm going two tone. Thanks for the urethane reducer tip.

depends on the car and if you really like the car or not... i recently got rid of my hyundai accent for an older lexus and i feel i made the right choice i could have fixed up the hyundai for about 600 but it needed new tires and it also had an engine that was burning oil like crazy...i will fix this lexus up like nothing.

You are holding the installation driver incorrectly

I ceramic coated the hell out of mine to try and protect it from this sort of thing. Only time will tell.

Can a 263XHD Chain and Sprocket be installed in a 263HD ?

That matco has same design as the old non comfirt mac i was talking about but only find them online used..unless you know mac plave that has them

If you contact koons trucking channel im sure he can find you a mac dealer..very informative on there

Great video

Mac is best looking for sure..wish they sold the older all metal flex ones..besides on e gay

H

Very well explained!!

Where can you get those drill bits for 200 . They are over 600 on my truck

I’ve had my replacement for 1 week now. It’s peeling. 3rd top. I’m done. I want my money back. I waited 10 months for this one. Snap on is not the same company anymore

Nothing compares Milwaukee, Span On should go back to making tic tok videos

What should I be looking for carrier bearing preload? I have a new tracrite with new bearings. Thanks

What’s the red hexagon on the bottom of your fuel tank?

Sees 16 minute video oh it can't be that hard gets 5 minutes in nope this is above my knowledge level

That's a big tool box I didn't realize the back ground was the tool box.

Where are you hiding

How has the Raptor Liner over your chrome bumper held up?

Oregon has a very similar law 650.390 that states that "the factories must pay the same rates as the retail customers do" but the corrupted state interprets the word "rates" as only meaning the shop labor rates and not the labor time rates.So corrupted because they can not write a law that only protects the dealers and the dealers can always raise their shop rates.Illinois uses the same word "rates" and it applies to both the shop rate and the labor time rates.Techs are completely within their legal rights to bid their own labor times and all they are legally allowed to do is either accept or decline their bids.TECHS NEED TO ENFORCE THEIR OWN RIGHTS EVERYWHERE!"House Bill 3940 ensures highly skilled auto mechanics are compensated at the same rate regardless of whether the vehicle is under warranty," said Tim Drea

Great video! Thank you!

Any USA made Rachet is what everyone should own . I’m a retired mechanic and any non-USA made Rachet will break at the most inconvenient time! Trust me!

So I’m making a top for mine Are they using osb board under ? Glues to it or ?

So 4 years later, would you still go with a poly windshield?

Another overpriced Snap-On tool that nobody else makes and is backordered.

Amazing tutorial !! Well done Sir!

I wouldn't call any of those items up selling as they need to be changed. Up selling is BS fuel system cleaning, throttle body cleaning, brake pads at 50%, spark plugs that don't have many miles

Have bought 3 turbos from RDS. All 3 have failed.

Opie from SOA?

Jeromy Maurice Green aka Jayynasty 💚8️⃣🪄

also i know its not in overboost as when you hold down the I for two seconds the status lights move rapidly in sequence, and it wasn't so maybe user error on this one

How does it last on the chrome? I’ve heard people have had adhesion problems over time…

I think your are supposed to power off the Genious GB70 THEN hit the "I" to go into overboost

Maybe I can get an opinion or a few. I have a '15 jeep grand cherokee limited w/ecodiesel that I financed for $13,800 as-is earlier this year after an accident so it was the quickest way for me to get a car to get work again. My term is for 54 months at $374/mo. (Insurance at $295/mo) At this moment the repairs are beginning to pile up - needs new water pump, thermostat, serpentine belt (these first 3 alone was quoted at $3600), steering rack and pinion, sway bar links...I mean the cost is going to equal or surpass what it's worth now which is about $8K. Wondering if its just better to trade in for something that will last me in the longer run for a few years before a major repair is needed which could be covered by warranty or if not enough time to set aside a savings for repairs

Tool grid for my socket drawer has been hands down the best system of many i have used and it nice to be able to reconfigure easily. However for screw drivers and wrenches the widgets have been my choice because of how densly you can pack everything in your drawers and open up a ton more space in your box

These brakes are awful IMO. Bought my 3rd X3 with this kit already installed and the brakes are no better than stock (have bled several times...). Over half the 15" wheels I've tried dont even fit. Ripping these things off the car as soon as I can.

If my boss told me I need to improve on this or that Id be gone that minute. Youre not gonna tell me to improve anything when Im getting paid warranty pay fuck yourself.

I KNOW EXACTLY WHY BECAUSE A CERTAIN PERSON ALLEGEDLY STOLE THE ORIGINAL BLUEPRINTS ETC 🤔 💭 AND IT WELL NEVER EVER PROSPER BECAUSE THEY KNOW PRECISELY HOW THE OVERALL IDEA 💡 WAS BOGUSLY OBTAINED FROM WHOM THEY KNOW ORIGINALLY CREATED IT IN THE FIRST INSTANCE! (DANIEL 2:22,23) 👁 🙏 🧐 🎥 ⏰️ 🦉 🚨 🌎 😇 🛸 👽 🎩 🪄 BELK@ 🔮 ✨️ 🫡 🇺🇸 🇩🇪 🇮🇪 🇷🇺 🇨🇳 🇲🇴 🇭🇰 🇮🇹 ETC 👉 🌈

This dude is just promoting the scantool. He is no mechanic, he probably think that all car run on electricity

Did you use the provided Shultz gun that comes in the kit or a HVLP gun