Does an over tightened scope ring start to flex a scope tube and cause accuracy, holding zero and tracking problems but when you remove the scope, the flex backs off and it all looks fine? How delicate/sensitive is the torque spec to consider over tightened? 1-5in-lbs over recommended or 5-10in-lbs over recommended?

Is marking on the scope tube considered “crushed” ? Even if the tube looks and feels pretty round. Can a slight flex and permanent deformation (no longer perfectly round but can’t tell either) be considered a crushed tube at which holding zero and tracking issues start to present themselves?

Interesting, so unless a tube crushes then will you have tracking and holding zero issues? What if a scope says not to exceed 18in-lbs, but all scopes are super heavy today and always slip in the rings under recoil when you mount stupid heavy torches on top that the temptation to tighten to 20-25in-lbs becomes real, but you don’t see any tube crush. Will that scope lose its ability to hold zero or compromise tall target click tracking even after tightening up a few more in-lbs but no crush or will anything above the recommended torque always cause zero and tracking issues no matter what? Does 1 in-lb above recommended guarantee a permanently ruined scope in all cases? How tolerable is it?

Damn… now im gonna have to buy that lc

I tried to shoot my 1911 45ACP and Glock 34 9mm in IDPA and did not have great success switching between buns as the Glock has a unique grip angle. many of our scenarios were close in where you would simply point and shoot without focus on iron sights. I sold all my Glocks and stayed with guns having the standard grip angle like S&W M&P, SIG and CZ. My present carry gun is a S&W Shield+ but I'm transitioning to the H&K VP9 family. A VP9SK-B would become my new carry gun and I just put my first pistol optic on a VP9 Match with a Holosun 507C green. IDPA isn't as fast paced as IPSC and more mirrors concealed carry scenarios. It was started here in Arkansas by Bill Wilson.

I’d like to see something like this for UTV riders who travel long distance. I have no need for orange however, and would like it in either OD, Tan or FDE.

Nanuk are the best cases. More rugged than their competition.

Highly recommended seller. I own a pair of mittens from this company, best mittens ever.

Im surprised that a $400 cooler performed better than a $25 cooler. Shocking

Very little detail on setting up the blind. I’d give you a 3 out of 5.

Did he rub his finger on the lens "to make it dirtier", then later say "don't rub your finger on the lens, in the field"???

The only thing to disappointment me is the lack of casting.

I recently bought this vest for deer hunting in Pennsylvania. Overall, it is a decent vest and holds almost everything i need. however, there are a few areas of concern that could use improving. 1) use zippers on all the pouches (except maybe the extra large pouches) instead of plastic clips and nylon straps. They don't stay tight at all and small to medium size items fall out easily from the gaps, even when fully tightened. 2) add grip teeth to the plastic pieces that hold the 6 side straps and make the end of the straps fatter. The straps fall out easily and like the pouches, don't stay tight. 3) add a slot to the top of the vest that can feed a drink tube from the pouch and over the shoulder straps. Having to run it through it's own open zipper, across the back and shoulder, then under a shoulder strap isn't comfortable or secure. 4) shoulder straps are tight and difficult to adjust, also not enough storage for the excess strap lengths. I haven't had this vest very long, but so far that's what I've found wrong with it.

Q precio una usada amigos saludos chebres

Muy elegante arma magnífica amigos saludos belleza

Some good tips there. Thanks man.

Hey :) Awesome video! Really useful :) I have a Question, though. If I don’t get all the bark off the outside of the mushroom, there’s no health risks from a little birch bark in the tea, right? :)

Awesome

What color is the fiber optic on that 935?

How is it holding up ? Is it true the lids on these things are always warping?

Does the 935 over bore barrel actually make a difference when shooting steel loads??? BB’s,, BBB’s vs the 930 standard barrel, both modified chokes

And why exactly do you insist on sweeping the palm of your hand with every gun? I hope you don't teach safety classes

My prismatic 4x32 rifle scope get water inside and I remove front lens but there are remaining spots inside the prismatic lenses ! With what to clean those without disassembling?

I am thinking about getting me one !!! I have heard a lot of good thing about the crossbow ! I made my mind up I am getting me one !! Does anyone know the price on the excalibur 380 crossbow ! I think I am saying it right !!

Educational note: “Proof” is not the same as “percentage”. Isopropyl alcohol is described by percentages. Proof is double the percentage, so 90 proof is only 45% alcohol. What you are using in this video (initially) is 90% isopropyl alcohol, not 90 proof drinking alcohol.

Check your legs for ticks

Don't watch it it's clickbait

Only got through halfway of the video. And I'm going to go to something better. Your video is definitely weak sauce or for you Canucks to understand Your video is junk garboso garbage people lose brain cells watching the stupid ass video

You say 400 yards is ridiculously far. LMFAO 🤣🤣🤣🤣 try 2000m with a AR-10 and a Arken scope. Vortex you go ahead and pay that$1,000 I'll pay half that. And I will definitely help do you in short notice. Little kuppy Canucks owned by the queen or Trudeau

Your vortex scope is not even rated up to 50 BMG. Arken SH-4 6-24×50 is rated up to 50 BMG and cause half the price of your precious vortex scopes LMFAO 🤣🤣🤣🤣🤣🤣🤣. Give might want to tell your subscribers Arken is the way to go. You Canucks don't even know how to pronounce. Oh I forgot you guys are owned by your queen. In prime minister Trudeau. You guys can't even have firearms in your own house. At least America has a pair those two guns in my profile sit right next to my bed fully loaded ready to rock and roll read along with my AR-15 if anyone breaks into my. What do you guys get a kitchen knife maybe a baseball bat. And your guys's criminals get that s*** is hilarious

Well no just in washing this video I can you tell that your Canadian Canuck. Cuz you don't know how to say process. You think vortex is the best LMFAO 🤣🤣🤣 41 you're paying a higher price than what you can get from Arken into their scope rings suck. Arken gives you scope rings that are 6 lugs vortex takes only gives you 4 lugs. On top of it Arken Scopes are illuminated.

Vortex scopes LMFAO 🤣🤣🤣 Arken SH-4 6-24×50 hands down is the way to go. People if you read this screw vortex t go with Arken. I guarantee you you'll pay less money but you'll see better than vortex. I have it on my .338 Lapua muzzle FCP-HS an my .243 an my .308 AR-10 Arken is the best scope you can buy hands down

Hmm I just break it up in pieces and put a few in a pot of water on the stove on low and let it turn the water almost black and add water as I take water out and just use that water in my coffee. Where you at in northern Ontario? Im around pickle lake myself and find change there more then anywhere else I’ve lived. Good video thanks

The HD5000 is reversed. Makes me wonder why in the world Vortex reversed what seems to be the industry standard of Diopter on the right. Still love the HD5000’s!

Just discovered this brand. How does it stack up to Pelican?

The scopes aren’t made in Canada, but in China. Says so right on them.

So how do you clean it if it's actually dirty?

I’m gratified that you’re still doing well despite the gun ban in Canada

Love my 935 shimmed it to fit and and have shot many ducks with it definitely recommend to anyone for a great gas shotgun.

isn't windex bad for optic lens in general? Like weakening or ruining the coating on the lens?

They can't get 12 round or 15 round or 20 round magazines.

My brake is in the parts box , where it will reside, the only thing I found the brake did was make it obnoxiously loud !

La mira ya viene ceriada la 223

is it safe to assume any grass/brush field surrounded by agriculture is good habitat for pheasants?

You're a great Dad

very informative. thank you.

My dad has a 935 he uses for sporting clays. I have a 930 tactical for self defense and hog hunting etc. I have never had a hang up on either one to feed or eject, those who do don’t clean and oil and use that super cheap low recoil crap. Automatic shotguns function best with full power shells and the 930/935 is no different.

Clear as mud.

Neat to meet your family! Thanks!

Great video series. I live near Toronto and have no idea where go hunting. Does anyone have suggestions? I’m not a fan of a those hunting farms. Thanks.