Hi, we can certainly work out a custom order. Please visit our Etsy store at www.etsy.com/shop/CosplayPhreakShop and let me know which Wolverine Helmet you are looking for specifically. You can reach out to me via etsy and I will be more than happy to send you a quote once we determine which specific helmet you would like.

sorry you feel that way

If this was Deadpool I would 100% agree, however, the movie and comic Lady Deadpool does not have a bulge, that is removed and replaced with the pony tail.

Unfortunately I have never had to return anything to them so I do not have any experience with their return policy. However, please see the following link to their website/return policy - www.oneherosuits.com/returns-refunds-policy Hope this helps :)

The full video will be coming out on Saturday. There i do a full review and show how it is very stable. I wear these all the time at cons.

Thanks :)

I know right.....

Yes, I would recommend oneherosuits. Also procosplay has a great reputation for these cosplay suits. I believe they are all made in the same factory in China, so many of the online cosplay stores sell the same items. I would recommend to shop around and see if there are any sales to save some money on the suit. I hope this helps :)

Thanks :)

Thanks Tony for pointing this out. I have made the correction to the link. They also have an updated version with more breathable material that I am thinking about purchasing. I'll put up a review once I get that version.

Merci beaucoup :)

I purchased the suit from ilustra studios, it took roughly 6 months from purchase to delivery.

Thanks :)

I bought it from IlustraStudios. You can find them on their website ilustrastudios.com/en/ or etsy www.etsy.com/shop/IlustraStudios. Hope this helps :)

:)

So the very best I could suggest would be to 3D scan your subjects head and model over that. That would be the most accurate. However, I have had pretty good success with the Budwin Sizing heads that are free on Thingiverese. I should have a link in the video. I would also just give a little more room when sizing. After you do one helmet, you will get an idea on how much room (if any) you will need to leave from your subject model in the cheek area. Hope this helps :)

@@CosplayPhreak that does help. Appreciate it brother. What's the next video going to be about? Really like your videos.

Video this week is Captain Deadpool. I just dropped the short today. Normally shorts go out Wednesday and full video on Saturday. But also keep an eye out next week for one of my favorite characters.... Spawn :)

@@CosplayPhreak ooooooooooh snap! I'm excited for Spawn!

Sorry thats the background screen on my computer. When rending in the slicer it takes up a ton of RAM and sometimes the program blinks in and out.

@@CosplayPhreak all good I thought you were trying to use subliminal messaging to print Yoda figures 😂

I've bought two costumes from them and they have arrived without issue. Hope that helps :)

very true

I don't believe I mention pricing on the video as it is a review of the 3d file and tutorial on the 3d print and build of this helmet. I do provide a link to the original creators file as well as a link to my store if anyone is seeking to purchase a fully printed and custom sized helmet. Hope this helps.

@@CosplayPhreak 0:37 it lists $20.00

@prettyboyray4479 the 3d print file at YoshStudios is $20, which I point out in the video and give the link in the video description. If it's not clear, that's the creator of the file. However, if you would like a 3d printed version of the helmet, I am more than happy to help you get your very own at my etsy store which the link is also provided in the video, note the 3d printed version is not $20. Thanks :)

Evil doers beware!!!! :)

TY :)

I spent the extra $15 and submitted custom measurements. It usually works out better with the cosplay companies based in China. Note make sure you measure everything in CM as converting from inches may be slightly off.

It's actually pretty close to the original comic design of the helmet. Check out the full video on my page :)

I can see it, lol :)

um ok

oh yea :)

I know, it was sized for my large melon not the bust. But at least it will keep the rain out.....

There's always room in the Deadpool core for another SugarBear :)

seguramente

I agree, totally is a cowl

ok

9

Ah, I see what’s happening here! The mask looks a bit oversized on the mannequin because, well, it’s designed for a head that’s more “CosplayPhreak” and less “department store display.” Turns out, my noggin is just a bit more superhero than your average mannequin. But hey, if you ever need a mask that doubles as a small home or a really dramatic cape, just let me know :)

@@CosplayPhreak yeah 😂

Adults wear them too :)

Thanks, check out the full video coming out this Saturday :)

Now I can't unsee that...... thanks :)

that's facking right... LFG :)

Oh, hey there! Sounds like my performance just got a solid "meh" from the critics. But hey, even a Wolverine classic isn’t everyone's cup of tea. I’ll take this as a challenge to dial up the charm and crank out something truly epic next time. Stay tuned, and maybe we’ll turn that “ass” into “amazing”!

ummmmm.... don't think Wolverine is sjw but hey the way marvel is going these days, who knows

@@CosplayPhreak I meant the way it looked on the mannequin head lol

Lol, I'll make sure to wear it next time instead of having it on the mannequin :)

It's actually fitted to my head. The mannequin head is a bit smaller and it makes the mask look a bit big. But I custom size these to order at my Etsy store. Please see the link below: www.etsy.com/shop/CosplayPhreakShop

NO LOL 🤨

WHAT TF DO YOU MEAN LIKE NORMAL PEOPLE LOL 💀

@@Yahya_Eissastop yapping

Actually the first appearance of Wolverine was Incredible Hulk #180 final panel then the full story unfolds in #181. The costume was the yellow/black/blue costume.

brown ochre isnt the original wolverine suit. black, blue and yellow is love both but i prefer the brown ochre suit, so damn cool on logan

No way bro actually got out nerded TWICE.

Sorry buddy, your calculations appeared to have been incorrect, it’s ok, I’m sure you’ll get it right next time 🙂

@Jackalicious I also prefer the brown suit. Plan to make that soon.

It's sized to my head not the mannequin

NO LOL 🤨

Thank you! I am in the US, we can certainly have prop (not air-soft) pistols and swords for most conventions so long as there is an orange tip (paint or tape) on the end of the pistol. Swords and other props normally need to be non-metal or very heavy per most con rules. The security at the event will also screen props and mark them with a flag or sticker to denote it is a prop and con-safe. I only use airsoft or other non con-safe items for photoshoots. Hope this helps :)

@@CosplayPhreak Thanks. In Poland people don't care mostly. At most security will check if you have gas in your magazines or if the swords are sharp. PS. Greetings from a 501st Legion Kylo Ren ;)

Thanks. So cool, I am actually in the process of building a 501st Clone Trooper (Rex) for one of my sons and a Halo ODST Recruit for my other son. Been taking some time but getting there. I'll post a vid once completed. Too many projects at work....

Sorry you feel that way.

Ok

Thanks

I'd me more than happy to help you out with that. Please feel free to head over to my Etsy store to get your very own Deadpool 3 Helmet. Link: www.etsy.com/listing/1748412292/deadpool-and-wolverine-inspired-deadpool

Going by the Beaufort Wind Scale, these puppies can handle a Cat 3 Hurricane....

Actually Lady Deadpool and Gwenpool are two separate characters. Lady Deadpool which is a variant of Deadpool shows up in the movie. Gwenpool unfortunately did not, but I wish they do show her in a future film. :)