Sanjay Noronha

Пікірлер

@BetaboyBuffet Ай бұрын

Thanks and this is made over complicated by Fujitsu. I have a Wlan unit and in the app you cannot set the temp off set. I guess that would be too obvious.

@westernmike365 5 ай бұрын

Funny guys here nice work, seems making your own pizza is even more satisfying the making it and saving cash, cheers

@jupiterinaries6150 5 ай бұрын

Nice video but you need a pedicure.

@sanjaynoronha7000 5 ай бұрын

😂

@JamesHyde-rw5uu 6 ай бұрын

A nice "hard core" look for your Pit Barrel!

@Edward-yw8tg 9 ай бұрын

Thank you for this video, my mini splits wasn't cooling as low as the remote says, I followed your instructions exactly and now it works perfectly.

@Kingofcardboard229 10 ай бұрын

I could not put the arm rests on, the screws are not long enough. Horrible experience with them

@CaptainKenny696 10 ай бұрын

Excellent video. Thank you very much. The manual I downloaded doesn't have the point at unit step and the point at unit step doesn't work.

@sikulsikula7267 11 ай бұрын

Knife set only price

@DowntownVegasLife 11 ай бұрын

I dont have an installation section on my mitsubishi manual

@joesmith7427 11 ай бұрын

NSF APPROVED??

@johngtag 11 ай бұрын

Thanks man needed it for a pizza for my family

@saudkhan5353 11 ай бұрын

hy haw are you I like this what is the price I leve in pakistan

@romitjethwaney Жыл бұрын

What size are you in UK and what size Berkinstock did you buy? I don't have the time to actually go to the store, so just wanted to be sure befor buying it online. I am a UK 11, so it seems like a EURO 46. Would love a response, thanks!

@Marianaluz-vw4fp Жыл бұрын

Thank you brother. Blessings and bon appetite!

@leov666 Жыл бұрын

Thank you for a super helpful video, it worked for me! Using Setting 06 (-5F, -2.5C) as my 12K unit was terrible at cooling, even after a complete service by the installer. Now at a Medium to High fan speed, my settings actually match the thermometer. Advice for the others: the AC unit must be stopped (not operating, but with power) in order to receive the "settings update" signal. Otherwise, mine wouldn't beep despite me furiously pointing my remote at the unit.

@JaneMwangi- Жыл бұрын

very helpful and well explained! gratzi!

@EllisLafarge1962 Жыл бұрын

Thank you very much. My 36K XLTH with 2 head units was not close to the desired temperature in cooling mode , despite being more powerful than the older unit that held the temperature exactly. I worked on the smaller 12k head unit and using your method of adjusting the remote, it now works perfectly( actually setting it at 60 degrees cooling I over adjusted it and the room was 52 degrees and falling). Thanks to someone leaving a hole by where the line-set goes through the sheetrock (2 times ) , I am on my third 24k head unit and in heating mode with this one , the temperature is off by at least 5 degrees. I will use your instructions to compensate ( and this time we used steelwool, mothballs and pest resistant foam by the hole). Again, thank you for your assistance and be well.

@petew7077 2 жыл бұрын

Interesting video Sanjay, thanks much. I purchased an 18k Fujitsu Heat pump in spring 2021 and the user manual does not contain this function matrix at all.

@sanjaynoronha7000 Жыл бұрын

Hey Pete, you need the installer manual for this. Given my air handler's position in the room, I found I have to adjust this to cool by an additional 4F and warm by an additional 2F to get to "truth" in temp.

@petew7077 Жыл бұрын

@@sanjaynoronha7000 Thanks Sanjay. That explains why I didn't see that table.

@dponzi56 2 жыл бұрын

I bought this about a month ago. I'm just a home user, that makes sausage a couple of times a year. I've was using a Kitchenaid mixer with the grinder attachment for over 20 years, but the grinder is on its last leg. It split open a couple times. I epoxied it closed, but it was time. I made sausage with my new grinder about 2 weeks ago, and the grinder worked great. Really fast compared to the Kitchenaid. Stuffing was okay. The problem I had with stuffing was the tube kept coming loose from the flang. The tube slides in. You line up 3 tabs into 3 slots, then give it a little bit of a turn. When I slid the casing on, it came loose. After a few minutes, I got it to stay, but it came loose when I started stuffing. The pressure of the meat going into the tube keeps it stable enough, but its not great. I'm 90% happy with it though. I might buy some after market stuffing tubes, and see if they will work a little better.

@naturalonenaturalone8996 11 ай бұрын

my problem too.Ill buy a stuffer soon.But probably not MEAT unless its in sale

@danilolovendino3663 2 жыл бұрын

saan po ba makakabili ng sausage pannel para sa paggawa ng longganisa, nawala na kasi yong dati.

@lioncash5218 2 жыл бұрын

🌻💐😍❤💋🙏💗

@lital8140 2 жыл бұрын

is sausage maker

@gaylecheung3087 2 жыл бұрын

For stupid people

@jvphilip 2 жыл бұрын

Quick question: Like you, I have a Greek foot (second toe is longer than the big toe), and invariably it hits the edge of the sandal. Is that normal for those with Greek feet or is there anything way of fitting a pair of Birkenstocks for these kinda feet?

@celsomateus4958 2 жыл бұрын

Quien lo vende en Bogota. Precio.

@rebimbocas967 2 жыл бұрын

Muita força 👍👍👍

@JH-zr8lo 2 жыл бұрын

BORING

@thomaskietur1782 2 жыл бұрын

Thank you so much!!! We had a new 9k mini installed in our MBR, it never cooled well so we had them bump it to 12k… still had cooling issues. This offset was the trick. Could have saved me thousands if I saw it last year. Great video!

@shallowravers1705 2 жыл бұрын

Code 49 is what i needed. I want the fan on indoor unit to run continously according to my speed setting. On cooling the fan stops when outdoor unit is not running, which means the ac is off most of the time. The 24/7 air circulation helps a lot with stable room temp.

@sanjaynoronha7000 Жыл бұрын

Oh interesting, I will have to go check this out!

@ShallowRavers Жыл бұрын

@@sanjaynoronha7000 I have 3x Fujitsu Comfort AOYG09's, and purchased these primarily for cooling computer room, home theatre and bedroom. Got the computer one about a year before the 2 other, and it was ok having the fan stop between active cooling, but was very uneven temperature. After installing the other 2, and especcially the one in bedroom, i found that I had to set it to lowest temp, and even then the room would get quite warm before it started back up and got ice cold. the air got very stale aswell since i was used to an ac unit with continous fan circulating the air. After finding out about the Code 49 continous fan w/user control speed, it was a whole new world. I could put the unit back to 22c cooling and the temp stays constant throughout the night. my ac installer was unaware f the feature, and was something i asked specifically about when purchasing the 2 additional units. granted cooling isnt that big here in norway, but still it should be common knowledge for the installer imo.

@Mary-vf4yr 2 жыл бұрын

Contact details please

@Mary-vf4yr 2 жыл бұрын

Name and price please

@AshleyAlvares 2 жыл бұрын

Wow..brilliant... I'm looking for the same thing...for the exact same purpose. What is the insert plate outer diameter? 6.9cms?

@roypereiras.j.9341 2 жыл бұрын

Congratulations Sanjay Sneha Daniel n Nathan!

@carfvallrightsreservedwith6649 2 жыл бұрын

I like that the drive end of the auger is all metal. Mine has a plastic splined cap on it that slides inside another plastic piece. Already had one strip out.

@carfvallrightsreservedwith6649 2 жыл бұрын

You'll tire of using it as a stuffer quite quickly. Not only is it slow going (to stuff) but it lower the quality of the sausage. Smears the fat. A five pound vertical stuffer will cost about the same as the grinder, be 5× faster, and sausages will be of higher quality.

@BillBraskyy 2 жыл бұрын

Take ten shots for every time you see the word "meat" in the title, and one beer every time he says meat, and buttchug a whole 40oz Steele Reserve every time you read the word "meat" in this comment. *MEAT*

@keithcrews8363 2 жыл бұрын

Excellent Excellent

@motocross03087 2 жыл бұрын

Great video thanks for posting the manual sucks and your step by step is very helpful.

@01ananto 2 жыл бұрын

I am having a problem. So its so cold in Newyork. Same remote as yours. i set a temperature on 88 but its not even getting a littlebit hot. Any idea what to do? or this video is the solution ?

@sanjaynoronha7000 2 жыл бұрын

Yeah try the offset and see whether that helps

@01ananto 2 жыл бұрын

@@sanjaynoronha7000 what is offset?

@افكارسيلا 2 жыл бұрын

بتقطع الحلمه خشن

@kuinagel 2 жыл бұрын

I bought this one a while back when I started. 100 bucks with the sale can’t beat it. Then I had to up grade. But for a couple of years my whole hunt club was using it. Honestly there was a time we grinder close to a thousand pounds in four hours. It did it’s job. Deer and hogs, we did beef summer sausage. You can see why I bought another one. Got the one HP on sale 30% plus a military discount on that and that my friend is three or four times as bad ass. Can’t keep up with the grinder when cutting pounds and pounds of meat!! The lil grinder is still used and it’s used 3-5 times a week. When I first got I was just thing store bought meat and grind once a month. It’s a lil beast perfect for what you are doing. 🤙

@naturalonenaturalone8996 11 ай бұрын

What was ur final price after ur discounts?

@pappy232 2 жыл бұрын

Fujitsu’s are terrible at regulating temperature, they short cycle like crazy, I’ve only had this issue with Fujitsu, with Mitsubishis I’ve never had the temp or short cycling issues. The Fujitsu at my house I usually just set at 68 in the summer and 74 in the winter, still doesn’t hold anywhere close those temps and cycles around 200+ times in a 24 hour period but it’s the best I’ve found

@sanjaynoronha7000 2 жыл бұрын

I believe if you change the settings per my video, you will see better regulation and less short cycling. At least I have. It works great for me since I did this.

@pappy232 2 жыл бұрын

@@sanjaynoronha7000 I’m going to try the high insulation setting you mentioned at the end of the video, I think that may help me, thanks!

@motocross03087 2 жыл бұрын

@@pappy232 I was thinking of trying the same.

@maumassa 2 жыл бұрын

Thanks a lot, really helpful!

@Mary-vf4yr 3 жыл бұрын

Price please

@necoalejandro9026 2 жыл бұрын

How much po and saan mabbili

@kuinagel 2 жыл бұрын

$100

@Mary-vf4yr 2 жыл бұрын

@@kuinagel Contact details please

@sikulsikula7267 11 ай бұрын

India money please

@sanjaynoronha7000 3 жыл бұрын

kzbin.info/www/bejne/qH-zh3mnl5WhjcU

@nomad90125 3 жыл бұрын

OMG, they didn't supply any ear protection. 😂

@nomad90125 3 жыл бұрын

Seriously the meat grinder attachment on the Kenwood chef titanium is a hundred times better than what you have bought.

@kuinagel 2 жыл бұрын

Hundred times?? 🤔 stop hating

@NoOne-wh6hl Жыл бұрын

You Said, You Were Going To Use Fork. Good Luck 😁😆😁

@sanjaynoronha7000 3 ай бұрын

So I need to buy a Kenwood chef titanium first, then the meat grinder attachment.

@nomad90125 3 жыл бұрын

500w 🤣 id use a fork 👍

@RG-tx6up 3 жыл бұрын

Great video. Thanks Sanjay. I found the arm rests to be a bit flimsy, which they shouldn't be in this price range.

Ең жақсы KZbin

Пікірлер