Need more videos like this! Simple, to the point, key information given at proper times, and not inflated with useless stuff. Thank you!

Thanks for the helpful video. Question about running the cable to the rear camera across the top of B pillar like you did: Does that run across any curtain air bag. People have said that that a deploying bag will blow through a camera cable, but I like to run the cable behind the bag if I can. I'd like to avoid taking the pillar cover off to find out if I can. Thanks.

Hi thank you for this video. It was very easy to install. I do have a question tho. Do the camera stay on At all times and if so will it during the battery? Also does the camera get hot? I was very hot outside today so maybe that’s why it got hot but I wasn’t sure.

I have a 2024 F150 - What Fuses would you recommend I piggyback off of? I was thinking Power Mirrors (Accessory) and Dome Lights (Battery Constant) - thoughts?

Thanks for the sharing. How did you get behind the camera cover behind the mirror to install the wires in the same opening as the existing wire? Any tricks on gettin the cover off?

What will be the best fuse for acc mode please? I plan on using the 7.5 amp no 3 for constant power since I don’t have a Wireless charger

I just installed my dashcam in my 2023 F150. This video was a huge help. Best video I've seen in a loong time. Many Thanks

K&N do let more air in but they also let more dust into your engine to, so be careful . I always use Febi air filters, much better.

Thank you. This video helped me out.

Awesome video, I was annoyed my 23 doesn't have it either

Neither of those actually provide constant power.

Very helpful, I'm planning on doing the same with my 2018 A5 TFSI. I like the fact that the screws stay in the airbox cover instead of disappearing into the engine bay and then rolling under the car 😂

Thank you so much for posting this, made installation a breeze!

Where did you find that replacement with the retainer clips or whatever they’re called Wonder if it’s the same for 2023

Does this work for 2016? The air filter doesn't open when I try to turn it

29 is not constant power.

What is the part # for the cup holder you swapped in?

Will this now fit the large Nalgene bottles?

Excellent video. Just a couple of thoughts based on my experiences. The captive screws only take 5 rotations to remove/tighten - I don't bother with a power tool. And if you're somewhere that have leaves fall off the trees, have a shop vac ready to clean out the compartment before actually removing the filter. Mine had a quite a few dried leaves to be sucked out. And after removing the filter, be ready to vacuum any small shreds that might be attached near the seal. And maybe check to see if any debris fell from the filter pleats back into the compartment and clean it again after the install.

Will that work for my 2020 XLT?

Great video 👍🏼 do you think the same locations you tapped at the fuse box could be used to power illumination to upfitter switches??? 🤔 I’m adding the upfitter switches after the fact thanks for the video 🙏👍🏼

We’re these fuse slots 3 prong or 2 prong? My truck isn’t yet trying to be prepared

What's that little pry bar? I need to fix one side with the pinchers.

Which Dual fuse holder you used?

Thanks!

@soc4me, I have a question about your other video replacing the F150's center console rear cup holders. In the description you provide a PN# ML3Z-1513562-DB. Is this really correct? Could the 'D' really be a 'C'? I'm finding this very similar PN# ML3Z-1513562-CB.

I purchased this E-0646 for a 2018 Audi A4 and the stock oem filter is definitely smaller than this K&N filter.

Hi guys Did anyone can tell me wich is better K&N 0647 or K&N 0646 Thx

What's the kn part number

Thanks for the video. However, when I screw the cover back, I noticed gaps between the cover and the air box. Did that happen to you? Am I installing it wrong?

Could you please tell me how much does it cost that K&N air filter? Thank you for your answer.

Outstanding tutorial. Just got a 2017 A4 Quatro s-line and with this being my first Audi I needed to know how to change the filter out for a K&N which I do on every automobile I’ve owned. Super easy and to me a must do easy mod for all vehicles!

Great tutorial. Any new content? how's the B9 treating you? any warranty repair? any mods? I've been thinking about a B9 but can't decide on the sedan vs the allroad. Then there's the Quattro-Ultra vs Quattro decision.

As for the gas mileage how have it been si far?

K&N is too expensive, I found cheaper one for £10

how frequent do you change the air filter?

So how you likin this car? Is it reliable? Any problems? Im thinkin about getting one this month

Thanks very much for the tutorial! Worked like a charm on my 2018 Audi A5 Cabriolet. The only thing I would caution (I used a K&N E-0648 Air Filter) is you have to make sure the smaller slide friction clips on the bottom are lined up. The first time I put the K&N on, I missed one of the clips; it slid above the grove portion of the clip. Other than that, your video was spot on and thank you again for posting it!

@soc4me did you have any change in intake sound?

After how many miles are you supposed to change the oem filter?

Maybe buy another filter cover and cut some of the plastic on the top away so the sound can come through. I know it is not the best for performance, but it would still have some heat cover around like some performace filters do. I think I will try that out. But first I have to ask the price for that filter cover.

Hei men please please do a video with the oil exchange because I do not understand how to remove the oil filter, it's crappy I can not figure out how to take it out

After changing the filter, did you get any intake sound?

Thank you so much for this video! Was looking everywhere to replace my Audi A5 filter with a K&N one. Have you noticed any difference in car performance or sound upon replacing the filter?