Thanks for the video. Though, I used Krytox GPL 205 G0 because that is what I have laying around back when I was lubing switches. I assume this would work better since Gulikit switches kinda act like mechanical keyboards. If you have Krytox, use that. If not, use bearing grease as it's much cheaper.
@vegmario29 күн бұрын
I didn't have bearing grease on hand so I used krytox (the one to lube keyboard switches) and it worked just fine too. Thanks for the video mate.
@kairon156Ай бұрын
Thanks for making this vid. I ordered this controller and will be switching the face buttons to the Xbox style as soon as possible. I do worry about that metal plate sorting the soldering though. Sounds risky for a controller that's almost $50 Canadian.
@yonggorАй бұрын
Ya I did made the mistake not taking enough precaution for the potential electrical short. It's better to remove battery and discharge capacitors before fiddling with that metal plate.
@unashamed20Ай бұрын
what was that nifty lil gadget you used to take the screws out?
@yonggorАй бұрын
That is Xiaomi Mijia electric screwdriver ! Good quality tool for its price.
@TP_19872 ай бұрын
Thank you sir, God bless you.
@franciscosampaio16002 ай бұрын
thanks
@TyBortis2 ай бұрын
Thanks for the steps. My controller's right joystick was getting stuck, and this video was very helpful with opening up controller. To finish the job, I did need to find another video, but the initial steps with the same. Please continue making videos like this.
@endreweggsАй бұрын
Can you please share the link for the other video?
@hectorr19943 ай бұрын
thanks
@WillFuI3 ай бұрын
U made thanking this controller apart look east as can be either that isn’t thr first time u have opened it or the made the kk3 max a lot harder to open. I have issues with the back buttons giving out after like no time at all.
@Lil_piojo1003 ай бұрын
Can you pls do a tutorial how to change joy stick in the gulikit King Kong 2
@agnafrei3 ай бұрын
My X button (top) is constantly coming off just by pressing it with a little more enthusiasm. I emailed them and they suggested I put some glue on it (wtf?). What would you recommend to fix this?
@yonggor3 ай бұрын
Wedge a tiny piece of toilet paper between the cap and the pushbutton. Try a few times or change the paper to something else (plastic bag, cringe wrap, receipt paper) until it stop falling out again.
@agnafrei3 ай бұрын
@@yonggor thanks for the advice!
@Bonk_Bonkus3 ай бұрын
Thanks tons for this video, it was nice not being yelled at with EDM being thrust down my ear canals and gigantic bell icons chasing me in my nightmares. I get really stressy doing this kind of stuff cuz over time I've developed a knack for conjuring ways to screw these things up so having a straight up video to come to is really nice. I was in the middle of goofing around in ToTK when somehow I couldn't jump anymore which sucks when you've got a sword approaching your prefrontal cortex at mach 6. Kicked this on, took it apart, and lo and behold our good friend dust. Cleaned it out, put it back together and it's all good to go. PS for anyone else; the bumpers may get stuck behind the triggers if the case isn't on cuz there's little plastic lips in the backplate that help move them out of the way ever so slightly.
@mikmak72584 ай бұрын
thank you
@yonggor3 ай бұрын
Welcome!
@shreddedcheese65094 ай бұрын
My king kong 3 broke my pry tool. I put the wrong A button in the wrong slot and it's stuck. I literally just opened it.
@jundahbalafif26104 ай бұрын
thanks a lot, i didnt know mine using switch button placement so i accidently put the wrong button placement and it was stuck there, your gluestack tricks helps alot
@tusansanchong82964 ай бұрын
4:30 why do I hear a man moaning?
@alanbenyamin4874 ай бұрын
I wish I watched this video before I grabbed my hammer when my kk3 max right thumb stick snapped in half
@DrawModelPrint4 ай бұрын
literally was planning on doing this to my ender 3 s1 glad to know Im not the only one that wants to do ridiculous things to their ender
@rogeriotavares27775 ай бұрын
Hi my friend, my King Kong 2 slipped out from my son's hand, and completely died on the impact. I've followed your guide, to see if there's anything off, but I couldn't find any issue, visually at least. Woud you make a eletronic video guide, to test continuity, voltage, current, etc.
@pinkmegalodon64446 ай бұрын
I only needed to open it cause I had a loose piece so Thx a lot this helped a lot
@gummi49776 ай бұрын
Didn't realized you can remove the thumbstick, i don't think mine can do it. Should i put some twist on it?
@gummi49776 ай бұрын
nevermind, i can remove it. Thanks!
@FerociousWolf696 ай бұрын
Hello i want to ask some question my zr button can't be use it fell down twice what i need to do and it makes squeaky sound
@MedChicken7 ай бұрын
3:21 are those weights in the controller?
@yonggor7 ай бұрын
You are right.
@ikrartulus89937 ай бұрын
Why my Gulikit KK2 usb c socket wiggling (not firm)? 😭 is it just me or anyone got the same problem?
@galaxymariosuper7 ай бұрын
ive got a weird bug with mine. the '+' and '-' -Buttons get registered as being pressed at the same time even when im pressing only one of them. i tried updating the new firmware but it didnt help. not sure if its hardware related. only got it for a week...
@Manuel-px4qw3 ай бұрын
Mine is doing the same thing after some month of use, its driving me crazy
@galaxymariosuper3 ай бұрын
@@Manuel-px4qw glad im not the only one...
@NicoMerco9997 ай бұрын
Its the worst controller Ihave ever had, upgrade bricked it straight away, this was my7 experiance, why dont they have any soft ffs its 2024
@ariffalimi8 ай бұрын
why does my L2 block my L1 after reassemble ? where did i go wrong ?
@mslucasmeloАй бұрын
I had the same problem. Just close the control and they will work normally.
@ariffalimiАй бұрын
@@mslucasmelo im not sure about your however mine are fixed just by putting all the part together and it will fit just right.
@Wafflesforsonic8 ай бұрын
I wanted to check this video out to see if you knew how to fix the squeaky trigger problem but you sure did fix the button delay problem💯
@turji8 ай бұрын
When I did mine I used white lithium grease🙂
@OHomemSimples9 ай бұрын
Thank you for the time and ditailed explanation! It Helped a lot!
@yonggor9 ай бұрын
👍
@avengederz9 ай бұрын
Can you change the button layout to xbox? I hate switch layout it’s confusing for steam player
@afiq3589 ай бұрын
You need to buy the xbox layout buttons instead which gulikit do sell. If you try swapping the current buttons it won't be flush due to the difference depth of the switches.
@afiq3589 ай бұрын
Thanks for this vid op. The B button on my controller started to squeak aswell and it drives me crazy with the noise it makes. Did the lube by using the krytox grease as most here mentioned and so far cross fingers, no more squeaky noise. 🎉 It's a bit of a shame that people had to do this mod because the controller is really nice. It feels a bit better than your regular xbox one controller. The disassembly btw is not too difficult, but for newbies it's understandable that it can get a little tricky once you have to gut the whole thing out. I recommend double or triple check the vid if you have any doubt.
@yonggor9 ай бұрын
Great. Thank you for your feedback!
@turji8 ай бұрын
One of the most user friendly controllers to fix, pretty strait forward, don't get me started on PS controllers🤬
@thebreadisyummy9 ай бұрын
Do I have to use grease because I don't have any
@bayuadhitya10269 ай бұрын
orang indo bang?
@yonggor9 ай бұрын
Org Malaysia bang
@darelldy495210 ай бұрын
Much better if you put Krytox 205g0 to mech switch
@Birawster10 ай бұрын
Hi man my left analog making noises when i move it, do yo think it's okay if i lubed my analog with electrical grease
@yonggor9 ай бұрын
Analog shouldn't squeaks! You should open it up abd check if the stick got any imperfection underneath.
@itzdcx799110 ай бұрын
I have stick drift😡 I thought they said this controller was stick proof Is the first week of buying
@yonggor9 ай бұрын
try update the firmware, you can find them from official website. Some firmware versions are faulty and your controller might be one of them.
@fathimpeter11 ай бұрын
Your video is very helpful, Many Thanks.
@yonggor9 ай бұрын
You are welcome!
@NegativeSin11 ай бұрын
Hi i have problem with my RB trigger button. it's responsive but you have to press it harder than usual. is there anyway to fix it?
@blitzbulz Жыл бұрын
I just rotate one part in the switch 90 degree sonthe face button now become linear switch. I prefer linear switch than clicky one, less maintenance to do..
@yonggor Жыл бұрын
I tried that too! Went back to normal clicky button because of double pressing.
@lazarus2oh2 Жыл бұрын
Are the ABXY buttons swappable? Can I just take them out and reassemble them like an xbox controller?
@yonggor Жыл бұрын
cannot, AB and XY buttons have different lengths, so you cannot just swap them. However, Gulikit sells xbox style replacement buttons.
@hongthailim8874 Жыл бұрын
good video. my new controller got squeaky B now greased and it's gone. tqvm.
@yonggor Жыл бұрын
You're welcome!
@Dataleak726 Жыл бұрын
Thanks for the vid, I had a button squeaking on day one but loosening the clips slightly seems to have fixed it
@yonggor Жыл бұрын
Glad it helped
@shahariarmahmud521811 ай бұрын
Whats a "clip"?
@moonlightdragon150410 ай бұрын
@@shahariarmahmud5218On the side of the button,theres a little tab.Those are the culprits on why the buttons squeak.Theyre made a little bit too tight
@max3927230947 ай бұрын
@@shahariarmahmud5218 might be a super late reply, but I just got mine today and had the same problem. in the video at 11:13 you could see him rotating the switch to its side showing a rectangular "clip/flap". I inserted a small flat head under the clip to bent it slightly outward and that fixed the bind. Will definately grease it later once I got my grease.
@budgetking2591 Жыл бұрын
someone in the background having a seizure
@yonggor Жыл бұрын
😂
@budgetking2591 Жыл бұрын
my left trigger feels like shit, like its scraping against the housing or something.
@orboksanci11 ай бұрын
Try removing the back plate, scrape should have marks, try to make room for it with sandpaper, removing some tenths of mm :) Or maybe the trigger has some cuttable casting spills :o (Was meant to say, probably manufacturing = QC defect, not by design.)
@AbyShift8 ай бұрын
do you have a fix for this? I have this one also @yonggor
@AbyShift8 ай бұрын
Update: it seems that if you put in the case screwdrivers, the trigger will go back to normal. That was the solution for me.
@lidiatorresprado Жыл бұрын
When I hear that kind of music from the Middle East it scares me.
@yonggor Жыл бұрын
Don't worry. The controller is made in China, it's not going to explode...!
@lidiatorresprado Жыл бұрын
@@yonggor No the music from middle east scares me, because I know how radical the people on those countries are.
@kevinsyahputra3260 Жыл бұрын
its not fix, its lube hahaha , but i will try and thanks for making this video broo
@crankiermusic7436 Жыл бұрын
i don't know what i'm doing wrong but when i reassemble it, my right bumper feels mushier than my left one. I've tried multiple times reseating the 2nd pcb to make it even, but so far, no success.
@yonggor Жыл бұрын
yes, a lot of people face this problem. Maybe I should do another video to cover this problem...
@yosxky10 ай бұрын
Me too i just kinda accepted it
@this_is_very_strange Жыл бұрын
You messed up the gamepad, man. :(
@yonggor Жыл бұрын
just asked my gamepad, she is better than ever
@this_is_very_strange Жыл бұрын
@@yonggor Ask your gamepad in two years, let's see what it will answer you.
@afiq3589 ай бұрын
Nah, nothing will happen, worst scenario will be that you have to swap out the switches if it's starts to crap out. Gulikit btw sell their switches too if you needed one.
@this_is_very_strange9 ай бұрын
@@afiq358 The best option would be to use silicone grease or a fairy tale for mechanical keyboards. And this one will eventually corrode plastic and rubber, because both are made of oil in fact. I don't think there's any need to argue with that, it's just a fact.
@martensite6488 Жыл бұрын
The up direction of the left joystick of my Gulikit Kingkong (non-pro) stopped working suddenly. Any idea if I could still fix this? Is replacement joystick the only option here? Thanks in advance.
@yonggor Жыл бұрын
Have you tried recalibrating the joystick? >> Press L, R, Left D-Pad and A at the same time I had this problem with an older firmware, recalibration fixed it but only lasted a minute. I thought the gamepad broke, but eventually newer firmware update fixed it.
@martensite6488 Жыл бұрын
@@yonggor I haven't done recalibration. I lost the instruction manual and haven't thought about on doing that. I'll also check if I have the recent firmware. Thank you very much for the response.