I like the Auxbeams but they are mount too deep. What is brand of light are you replacing? Those would fit in my CJ.
@charlespatterson913811 сағат бұрын
Looks somewhat like thw silverado spring on my pathfinder it dont fit around sonit frts all bend out of shape somwtimes b makes rubby noises
@zackeryeckenrod654920 сағат бұрын
I have a 04 tj and a 79 ford dana 60. I see your runnig the stock 6 mines a 5 speed what gear do you think would be a good combo im mostly running mud and trails not much rock crawling np 231 h.d. trans case. I really like your setup on that jeep just dont have that kind of money for what your doin. thanx bro.
@SquatchyOffroad15 сағат бұрын
@@zackeryeckenrod6549 What size tire are you going to be running?
@zackeryeckenrod654915 сағат бұрын
@@SquatchyOffroad 38s possibly 40s it's also a 6 cylinder. thanx
@jhinton088Күн бұрын
Is that a custom plate for that jack or does harbor freight sell those for the Pittsburgh jacks. Im throwing together axles currently for my tj and that would be a godsend.
@SquatchyOffroadКүн бұрын
So the long part mounted to the jack with the pads that screw up and down is from Harbor Freight and the pieces that are on the pads with the V on top to catch axle tube are custom pieces that my buddy built to slide on to the pads.
@jhinton088Күн бұрын
@@SquatchyOffroad genius, I will definitely be looking at doing something similar for my jack. That would make it so much easier to move around the garage.
@benjaminreinhardt2592 күн бұрын
Jeep is looking good. Why did you run wheel spacers?
@SquatchyOffroad2 күн бұрын
@@benjaminreinhardt259 Thanks Benjamin. I have to run them on the back with 2 1/2” coilovers for my setup so they hit at full flex. Since I run them on the back, I have to run small ones on the front to keep the track width the same. I have 2” on rear 1 1/2” on the front.
@benjaminreinhardt259Күн бұрын
@@SquatchyOffroad Gotcha. Thank you for taking the time to explain that. I am slowly building up my jeep and plan to do a wonton swap one day. Looking to glean all of the knowledge I can.
@SquatchyOffroadКүн бұрын
@@benjaminreinhardt259 Depending on how you set yours up and if you use a matching set of axles you may not need to run any spacers at all.
@tinablakely98002 күн бұрын
Looks amazing! And I think a certain someone was disappointed in an answer he got 😆😆😆 and the 2 puppies playing ❤️❤️❤️
@SquatchyOffroad2 күн бұрын
@@tinablakely9800 🤣🤣🤣
@dkhallal2 күн бұрын
Sasquatch indeed!! Nice.
@SquatchyOffroad2 күн бұрын
@@dkhallal Thank you
@johnf49272 күн бұрын
It looks awesome
@SquatchyOffroad2 күн бұрын
@@johnf4927 Appreciate it. 👍 Happy that the swap is done. 🙌🤣
@holoholohaolenokaoi22993 күн бұрын
Trump’24 or all is lost
@Youngsauce4144 күн бұрын
Imagine having a jeep that big with a 3.6L engine 🤣😂😊
@SquatchyOffroad4 күн бұрын
@@Youngsauce414 It’s a beast 🤣
@TheBabbsFamily74 күн бұрын
Gearing makes all the difference in the world… she’s a crawler not a bouncer 😉
@Youngsauce4144 күн бұрын
@@SquatchyOffroad my minivan has the same engine 🤣😂
@SquatchyOffroad4 күн бұрын
@@Youngsauce414 It’s a TJ not a JK. 🤣 It’s got a 4.0 inline 6. Now… she ain’t beefy but she gets it done. Same as your minivan. 👍💪
@Youngsauce4144 күн бұрын
@@SquatchyOffroad rite
@ajasher99447 күн бұрын
I just keep watching this. Got to cut the rear of my fenders and armor🤞🏻
@SquatchyOffroad7 күн бұрын
@@ajasher9944 You can do it! Most of time I take thin masking tape and tape it off till I get how I want it and then draw line beside tape. It definitely takes some time to get it decent.
@ConnieBost9 күн бұрын
So excited for y’all! ❤️
@MandMMayhemOffroad9 күн бұрын
Can't wait!
@tinablakely980010 күн бұрын
Looks so good!
@SquatchyOffroad10 күн бұрын
Thanks!
@shinysideup261317 күн бұрын
Looks great! Where did you mount your amp?
@SquatchyOffroad17 күн бұрын
@@shinysideup2613 Amp is a marine amp and mounted under front passenger seat.
@matthewcranfill858121 күн бұрын
That be a nice daily to match the shop TJ
@SquatchyOffroad16 күн бұрын
That’s what I told Crystal! Lol
@hillbillyhangover23 күн бұрын
SWEET!!!!!
@SquatchyOffroad16 күн бұрын
Thanks! We love the new look!
@bohannanmckenzie744127 күн бұрын
Tell me about that hard tonneau?
@SquatchyOffroad27 күн бұрын
@@bohannanmckenzie7441 Me and my wife built it out of a sheet of 1/4” thick aluminum diamond plate.
Most definitely brother and y'all do an amazing job
@mattm4794Ай бұрын
Air down fool, cheaper than burnin rubba
@99Jeep2008Ай бұрын
You gotta do what you gotta do when you can't find that sqeaking sound in the dash. 😉
@Sillyzombie666Ай бұрын
just saw this for sale on market place
@jafetmendoza67855 күн бұрын
fr just saw it on facebook marketplace
@TomSmith-nx3hxАй бұрын
Guess you're gonna find out!! I think you're right. Less messing around to put it together.
@TomSmith-nx3hxАй бұрын
Congratulations! Thank you for sharing.
@venture.explore.discoverАй бұрын
Congrats on your anniversary!🎉 I just sent you an email- no rush- get back to me whenever you have some time.
@davidthomas9267Ай бұрын
this was going good till I saw Talton rig - I'll pray that you survive knowing those folks!!
@SquatchyOffroadАй бұрын
We were excited to get a chance to build the sliders for the Talton's buggy. They turned out nice.
@bigtarheelfanАй бұрын
👍
@MandMMayhemOffroadАй бұрын
We are so proud of yall!
@SquatchyOffroadАй бұрын
Thank you :)
@TrailwreckerАй бұрын
That's awesome, cograts guys :-). We need to link up for a wheeling trip!
@ManuelPerez-er4nrАй бұрын
I’m going to flush mount mine weld them in
@SquatchyOffroadАй бұрын
Nice!
@Baldybiddle21 күн бұрын
take pictures i wanna see it
@ManuelPerez-er4nr20 күн бұрын
@@Baldybiddle just got it done the other day let me see if I can figure out how to post pics
@ManuelPerez-er4nr20 күн бұрын
kzbin.infodR8ePiwh3oc?si=8Drr-gT4D3MVO4ZR
@ManuelPerez-er4nr20 күн бұрын
Link below
@jamiefrye2024Ай бұрын
Looks amazing brother
@SquatchyOffroadАй бұрын
Thanks bud!
@jamiefrye2024Ай бұрын
You're very welcome
@landen_576Ай бұрын
i seen it posted on marketplace ❤
@SquatchyOffroadАй бұрын
We sold it last year after we got the crawler hauler. I don’t think the guy camped in it much after us. We kind of miss it but that hip replacement kind of changed the game for us. 🤣
@landen_576Ай бұрын
@@SquatchyOffroad i can give you the link if you want! it was just on there about a day ago it looked super cool man
@SquatchyOffroadАй бұрын
@@landen_576 That’s ok. I appreciate it. We found it too in a local group. Hope it goes to a good home for someone to enjoy.
@louise64512 ай бұрын
Sweet ❤
@andycaban24662 ай бұрын
Installed these taillights and when I put either blinker on they both flash. Anyone know why?
@SquatchyOffroad2 ай бұрын
Sounds like you may have something wrong with wiring. Only way should both flash is with the hazards on but I am sure you know that. I posted wiring colors in comments if you wanna make sure wires are good.
@notfatchxnmyride2 ай бұрын
no better friend than a basset
@SquatchyOffroad2 ай бұрын
She is a mess but we love her!
@darthshot78382 ай бұрын
I just seen that jeep you turned into a camper on Facebook and that shit is nice asf 😂
@SquatchyOffroad2 ай бұрын
Thanks man. We done a lot of camping in it.
@XJreplay2 ай бұрын
Hey I installed this exact thing, when my running lights are on I have no turn signals or brake lights just solid illuminated lights, any ideas? Thanks!
@SquatchyOffroad2 ай бұрын
Sounds like you may have wires wrong. Took me a while to figure out wiring. Had to use a test light and check each wire while someone worked turn signals and brake.
@SquatchyOffroad2 ай бұрын
Look in comments and I put what wires were what and check yours with that.
@donaldhanschman77282 ай бұрын
where are your safety glasses man!!? i see you with that air chisel !! I still got metal in my face from one of those!! Love your channel!!!
@SquatchyOffroad2 ай бұрын
Sometimes I get in hurry and forget and as much metal as I have had in my eyes through the years you think I would learn lol! Thanks for watching and your support!
@TomSmith-nx3hx2 ай бұрын
Headed to Gulches soon for the first time myself. Thank y'all for sharing!
@ericgalloway4612 ай бұрын
Impressive 3 part axle!
@honahwikeepa21152 ай бұрын
It's stuffed
@rickeyeplingjr22552 ай бұрын
Thats awesome Jeeps Can make it thru anything. Chippping the tires if u watch closely. lol.
@SquatchyOffroad2 ай бұрын
Thanks and it’s not chipping the tires. May be little pieces of rock flying cause its like shell rock. Been riding this place for 30 years but man how it changes. We tried slow crawling several times but it has gotten taller and more undercut over the years than the video really shows so now after trying slow crawl you gotta get back and give little bump lol!
@RebuildingAtlantis2 ай бұрын
Just crawl up. You're chipping your tires
@SquatchyOffroad2 ай бұрын
We tried slow crawling several times but it’s alot steeper and under cut than you can tell in video so got to give little bump lol. Its not chipping the tires though. Been riding this same spot for 30 years and used to could crawl it but with my wheelbase and how it has changed over the years gotta have little bump lol.
@MarkDurant-go1wo2 ай бұрын
😂😂😂😂
@MarkDurant-go1wo2 ай бұрын
That's a first seeing someone go over show off rock
@SquatchyOffroad2 ай бұрын
This was the first of two times I’ve been over it. Just gotta send it. 🤣
@MarkDurant-go1wo2 ай бұрын
Daniel?
@KennySPT2 ай бұрын
Ezekiel
@SquatchyOffroad2 ай бұрын
@@KennySPT😂😂
@SquatchyOffroad2 ай бұрын
Yep, front side of Daniel👍
@The_R-n-I_Guy2 ай бұрын
I wonder how long it took to wear that much. I have no doubt that there was noise and vibration. But sometimes between the car stereo, exhaust and tire noise. It can get really bad before it's noticed. This is why I like to look around and check things on my vehicles as often as possible. You never know what you might find
@SquatchyOffroad2 ай бұрын
Truck has like 280,000 miles on it. It is a 7.3 diesel with loud exhaust so he never heard a sound.