I will measure for you tonight. I have the gearbox open doing some mods to my final drive

@@road_2_pow_r that would be great

I ordered this a few days ago they sent me the support block instead . lol

Also, the bartek one does not fit into my input shaft as it has a step inside, so now I have see if I can get it altered a work.

excellent oem feel, you wont even know its a twin disc, and it doesnt make bad noises like other twin disc

@Road_2_Pow_R that's amazing I'm considering one for mine

@@thirdgeargrind really do, im so satisfied with mine, and im glad i went with a twin disc, the price is much better than the dkm twin disc, also its holding capacity is 700nm, with the r32 i didnt think i would be at 630nm already only boosting 1.2bar.... so im already considering ordering a sintric center, as the PTB racing clutch is upgradable.

hi eddy it was a guessing game really, i measured the input shaft from the input shaft end bearing to the spot where the support should sit on the shaft, then i used that to mark the spot on the outside of the case.... but what i did wrong was, i gave too much room for my reverse light plug..... now my support is close to the one gear... it sucks really

@@road_2_pow_r yeah I noted that, should be a little bit more inside but was good, will try myself just need to order the plastic cap

@@Eddy-th3kc How did it go mate? Did you manage the installation?

thank you given, this is only leg 3, we added times in leg 4 and leg 5 video, please given them a watch aswell

I think we should add detail when giving the times, since, we have alot of engine configs, and its very fun to know what config is delivering the best results..... keep in mind we racing at a DA of 2500

Will tel them

Thanks Justin. Good to see you at the event. Having fun per usual💪🏼🇳🇦🙏🏼

it will heat up aswell on the road, this only happened under quarter-tank. and continues pulls, my surge tank holds the pump in it, and we guessing it heats up the fuel, you can feel the surge tank is hotter

no terence you dont have to remove the transmission for this.... if you only doing the short shifter..... we had to do the clutch and flywheel combo

🤭🤭Ricardo, ons is oppad... maar ons moet 10sec in the kaap kom ry

Thank you, francois, we appreciate the kind words, and it is a difficult journey, but with your support and words of encouragement helps keep us motivated 😎

Thank you Tristin, we not done thou, i lost power at the last event, i must find time to troubleshoot and see why thou?

@@road_2_pow_r check for boost leaks. Even if you think you don’t have any you just might do. I found two big ones that’s been there from day one that know one noticed.

will definitely do that

we are going to try to break 11sec, with breaking too much hopefully

0.3bar

@@road_2_pow_r noice!

Thank you deron. In my case no, I did not have this issue. I'd like you to join the emerald k6 group on Facebook, some of the guys who worked with emerald manufacturers answer some of our questions there... It could be a number of things. Your configuration file on the k6, you plug and play harness, or your sensor. Elaborate on your setup... And type of wiring

@@road_2_pow_r ok thanks I got the plug and play harness that you got. I’ll join the group to see if I can get any help 👌🏾

we have ome sad updates coming in this week. r32 is out of racing possibly for the rest of the year

@@road_2_pow_r you'll get it back together sooner or later. Take your time, no rush, personal life comes first . I'll still watch all of your vids doesn't matter when you release! Notification squad!

No going back after the first hole. 😬😬😬😬

Dankie recardo

From what is understand, its for air to escape, so lets see

This one should be welded. I like mine being pressed in

www.x-parts.de/Ansaugbruecken/VW-R32-3-2-Liter-Ansaugbruecke-Turbo-Manifold-ROTHE::2520306.html

Add a phenolic intake spacer. It really helps with intake temps in start stop traffic

Hi Bruce, thank you! My international friend🙏🙏😎😎

Thanks brother!! Best seat in the house is to be there! Bring your car and come have some fun with us🙏🚙😎✅

Let's try! I need more cameras

You must come so we can see how the mk2 does

thanks for the comment, we will be at the next event upagainst the rs3 and toyota

thank you 🐻😆now i hope the gearbox survives

etse, no more excuses! r32 needs to turn up the boost, and ja, sachs is top brand

Thank you 061 garage, looking forward to see your car in action Saturday!!

Thank you duane

hahahaha, if it works!

Thank you Nasir, we will be turning up the boost to see what torque she makes, sadly we are limited to the 02m only being able to handle 600nm. but we can only push till 600bhp with spacer motor, before we have to go forged....... but lets see if we can hit 12.5sec at tony rust with 1bar of boost

We picked up the input wasn't active. Not sure if we assigned the sensor correctly to input

@@road_2_pow_r little oopsie. I had the idea a while back to cofigure my fuel pressure input as a oil pressure input so the ecu will cut engine out if fuel pressure drops in boost. since most ecu dont cut out based of afr. Granted i wouldnt have oil pressure protection. But still worth considering if your ecu has such a feature.

i could do that as well, ill speak to the ecu supplier, maybe they have firmware update

We are based in windhoek Namibia, for now

stay tune next video on Wednesday to see the damage

We must do it again!

We have flyby videos. Please visit the channel.

1bar boost and we will reshoot the video. Are you game to be on the youtube

@@road_2_pow_r Of course. Lets make it happen

we will make it happen

Let's see what she will be able to do next