what are the wheels n tires setup fitment is too clean
@Brandon11-_-112 ай бұрын
Imagine a kenne bell screaming on that☠️🗿
@miguelangel_332 ай бұрын
Caroll Shelby!🥲😉
@a.f-body1vids6552 ай бұрын
Is there a big difference between 4.10 and 4.30 gears on the street? I’ve got an F body 6 speed.
@wg85613 ай бұрын
Stock terminator? Those are rare
@Adultmale10003 ай бұрын
01 aint a cobra ! lol
@neobirb85973 ай бұрын
I wonder how my factory freak 2v would've compared. Bone stock with an Air Raid CAI, that thing kept up with cars it had no business keeping up with. I ran a couple 01 cobras door-to-door from 25-80. By buddy's bolt-on and tuned Focus ST couldn't hold onto it. And the only car amongst my then-friend group that gave it a run for its money was another buddy's FBO 350Z - which was dead even. Even encountered a couple gen 1 coyotes, which I never beat, but stuck with them better than I expected to.
@Boostedangel3 ай бұрын
Showed me what I needed to now I need that coyote for sure
@g04tn4d03 ай бұрын
How times have changed since the SN95.
@cptchalk3 ай бұрын
When the guy let off he was going 104MPH
@ericconrad23833 ай бұрын
Sounds pissed off
@alfonsoguerrero76023 ай бұрын
Still have the car what’s the rear wheel size and depth. Is the rear a standard 9” as well.
@Coyote_Mach3 ай бұрын
Fab 9 rearend and 18x12 wheels/325-30-18 tires
@charliebernal16523 ай бұрын
What does a coyote swap Mach 1 run for these days? 🤔 i need this car
@MoonRaker003 ай бұрын
💯
@ShaneRobinson19963 ай бұрын
2 of my favorite mustangs 💯🔥❤️
@FLAWLSS13 ай бұрын
Nice are you in the Bay? We should hit up some meets and cruises
@Coyote_Mach3 ай бұрын
Not from the bay,we’re in the valley,close to sac
@LodisFinest3 ай бұрын
Gotta love some snake on snake action 😎
@RAHSVT3 ай бұрын
Nothing better brother 🐍
@vinylscratch653 ай бұрын
The cobra either isnt real or switched his back bumper, because thats a gt rear bumper not a cobra bumper Edit: oh i see, its an 01 not a termi
@Coyote_Mach3 ай бұрын
😂
@vinylscratch653 ай бұрын
@@Coyote_Mach yyeaaahhh prolly should have read the title better lol
@mikelarry821003 ай бұрын
Rims & Tires setup please 💪🏾💯
@Vndcatr4 ай бұрын
Sounds so crisp 🔥👌🏼
@squidward34184 ай бұрын
I woulda ran them in my 02 gt
@Coyote_Mach4 ай бұрын
😂 you woulda got gapped buddy
@jacknickprobe4 ай бұрын
How the hell does that tr3650 shift at that rpm. Mine grinds at 5500😅
@Coyote_Mach4 ай бұрын
It’s built
@jacknickprobe4 ай бұрын
@@Coyote_Mach what did you change to make it handle those rpms? I have a 4v that I want to build for my bullitt, but this stock tr3650 would hate that.
@anthonytucker77054 ай бұрын
Did you ever end up with an 11 sec 1/4 with this car? I know you ported the mani and said something about going with 4:56 gears but don’t know if you ever did that. The new Gt350 is awesome btw 👍
@Coyote_Mach4 ай бұрын
Thanks 🍻 and nope best I ever ran was 12.5’s @112 with the ported intake and 456s..The car was my daily and I never got to serious about drag racing it,I think if I gutted the interior and had e85 it would have been in the 11s easy..
@silversonic994 ай бұрын
the honda was going faster....
@codypainter19564 ай бұрын
That Mach pulled 2 and a half bus lengths on that 2000 got haha my Mach would do that same stock for stock haha that machs running good will Make 330 at the crank with just an intake all day
@Coyote_Mach4 ай бұрын
Lol not even close with just an intake..A Mach needs longtubes/no cats and a good intake like a JLT and accufab throttle body and intake spacer to make 330rw on a true dyno..but yes 4v’s easily handle 2v’s
@codypainter19564 ай бұрын
Shifting at 8k nice 👍
@THINKincessantly4 ай бұрын
Soundss Sooo fkk gooo! 🫡
@jdmboostedek4 ай бұрын
How did you mount the Mach 1 scoop to the hood just like to know so can do the same
@zstang015 ай бұрын
Man that sounds nasty. By far fords best engine shame they don’t use it anymore
@KingCeee4 ай бұрын
One of the best
@zstang014 ай бұрын
@@KingCeee I’m bias cause I have a cobra lol
@Championedd4 ай бұрын
@@zstang01 best engine would be the voodoo but those old cobras just hit different
@zstang014 ай бұрын
@@Championedd I’ll have to check it out I don’t know much about the voodoo engine.
@AWDfreak5 ай бұрын
Looks like this was recorded in Rancho Cordova, California.
@chriiiiiiiisssssssss68415 ай бұрын
Is your Mach CARB and street legal? I have a Mach 1 and I’m trying to figure out how to keep it CA legal
@drufetti5106 ай бұрын
Baddest coyote swap mach1 in the 209 🔥
@JasonSturdivant6 ай бұрын
1:23 😬that shift to 3rd gear sounded like it fried some clutches or something. Props on holding that 2nd gear burnout all the way to the limiter lol✊🏼
@Broke32v6 ай бұрын
Hey thanks bro much appreciated, the 3rd gear shift was a little wierd but only cause I was shifting it manually so it touched the rev limiter before shifting. If I leave it in drive it shifts just fine but just a little early.
@bryanhart28726 ай бұрын
Sick ride 👌🏻 sounds nasty 😳
@coryboy3456 ай бұрын
Thing sounds insane... I'd go down to 4.10s and supercharge it though.
@ralphtrujillo17526 ай бұрын
The Ford killed that Pontiac
@SKYLINE5006 ай бұрын
How does bro have a coyote swap Mach 1 mustang in California 😭🔥
@Coyote_Mach6 ай бұрын
Lol it’s not that difficult..don’t play by big brothers rules and you can own any car in California 🍻
@drufetti5106 ай бұрын
@@Coyote_Machhow? 😂 I need the smog plug i see you in Stockton?
@Kadencabs7 ай бұрын
so cool
@OctaneSlain7 ай бұрын
I'm looking at a Coyote swapped Mach 1 currently with about the same setup as yours, except it has a HUGE cowl hood that I cannot stand. Looks like the Mach 1 hood clears the Boss 302 intake? What did you do to make it work? Because I was thinking of going with a Gen 3 manifold and finding either another Mach 1 hood or Terminator hood
@01minion207 ай бұрын
What exact cams are these?
@Coyote_Mach7 ай бұрын
106500 comp cams
@v8tergt6538 ай бұрын
Where did you get that steering wheel?
@Coyote_Mach7 ай бұрын
LMR
@rfor74718 ай бұрын
How did you fit the boss intake under the hood?
@Coyote_Mach8 ай бұрын
I mounted the factory shaker to the hood with my own brackets and the boss manifold fit no problem..I run AJE k member and motor mounts..
@19907up9 ай бұрын
Crazy 9 years ago. That’s my 1997 Cobra, the green one.