I’d worry about messing up my usbC using it as a kickstand
@RealCounterfeitCashАй бұрын
Is use it in a home theater setup it’s pretty. But my sundowns are monsters.
@PA5cAl1Ай бұрын
Would have been better if they added a waveguide for the tweeter
@DuncandhdАй бұрын
looked like an apple add at first
@zoltar808Ай бұрын
Really nice attention to detail, beautiful.
@likeclockwork64butbetter58Ай бұрын
Updates on plate amps too?
@Atok595Ай бұрын
Nice baskets too
@JasonsLabVideosАй бұрын
Agree!
@milchpulverkakao4917Ай бұрын
But they aren’t finished super well and are kind of sharp at the edges
@Dingleberry1856Ай бұрын
@@milchpulverkakao4917 so don’t fondle them??
@peterw2714Ай бұрын
Just need somebody to review these so we can get an idea how they sound and if they live up to the hype.
@ducktwacy6702Ай бұрын
Sensitivity (SPL at 1m / 2.83V) 78.5 dB That is very low..... Wouldnot use less then 150 watt on these
@Me-vp9he3 ай бұрын
Can't even get app to work on android keeps crashing
@amitsaini88573 ай бұрын
Kya price hai
@zubayrmir98965 ай бұрын
Is youtube music supported?
@Corbrwl4 ай бұрын
I was wondering the same thing.
@Corbrwl4 ай бұрын
When you look at their app video, it says that Input 8 is reserved for devices over Wi-Fi. So I assume anything that you can play on your device (phone tablet, etc.) should come through on Input #8.
@anarmammadov44465 ай бұрын
Hello. Are they sold as a set of two?
@SoundImportseu5 ай бұрын
These tweeters are sold per piece and are currently prices at €36,45 per piece, including VAT.
@thulanimahlangu96408 ай бұрын
I'm interested to purchase this products phone number please
@ejazmohd58398 ай бұрын
how much speakers cane attached in one Dyton Audio DAX88 ultiroom Amplifier ?
@SoundImportseu8 ай бұрын
Thanks for your comment. The DAX88 has 6 zones. There can be connected 6 stereo speakers (4-8 ohm) or 6 mono speakers (minimal 8 ohm) to the amplifier.
@rafa10134 ай бұрын
@@SoundImportseu not 12? Are you sure 6? 6 in case you use a bridge mode.
@eddieb4me4 ай бұрын
@@rafa1013 It's actually 8 zones. 6 can be speakers and the other 2 are RCA jacks. For example, I use one of the RCA jack zones to output to my home theater audio system. So if I am using a music streamer to play music, I can output that source into my home theater system. I can also go the other way. I can play what's on my home theater system on any of the speakers connected to the DAX88. The home theater system can be used as either a source or an output "device".
@jjlnguess73542 ай бұрын
Yes 6 zones translates to 12 speakers because each zone is stereo requiring and supporting 2 speakers in each zone. I have no clue why the manufacturer can’t spell that out. This amp is not a 6 zone mono setup, it’s a 6 zone stereo setup meaning 12 speakers in pairs of 2 across 6 zones. Maybe the manufacturer doesn’t have a knowledgeable person answering questions. I don’t know, but yes it supports 12 speakers and 4 more through the pre-outs if you connect two additional stereo external amps.
@3xcelsi0r109 ай бұрын
Can I fire the BST1 with a Yamaha RS202D receiver paired with an USB Soundcard for my PC?
@SoundImportseu9 ай бұрын
Hi @3xcelsi0r10 Assuming you are using a sound card to filter the signal (a bass shaker needs a low pass filtered signal), this is certainly a combination that is possible. With a filtered signal, a bass shaker could be driven by any regular amplifier (just keep in mind the RMS of the shaker). SoundImports
@3xcelsi0r109 ай бұрын
@@SoundImportseu cool thank you for the fast response
@wadimek1169 ай бұрын
To low sensitivity for me. I previously used dayton esoterics and they had extremely good bass extension but they also were the only woofers that I achived xmech and mechanical clipping.
@luca_rr466010 ай бұрын
Costs 370 euro in Europe and 235 dollar in the US? If it were to cost 235 dollar in Europe I would buy it instantly. 370 euro just makes the price too much for a small DIY project in my opinion. Because with and enclosure (EU price about 200-250 euro, DIY at least 100euro material costs for wood + costs for damping, a port, surface finish, etc) and a decent subwoofer (EU price 150-300 euro) the total price easily gets 700-1000 euro. For that price there are lots of ready to buy decent subwoofers on the market.
@SoundImportseu10 ай бұрын
You are right, this is not the cheapest plate amplifier. However, comparing our price to the price of a seller in the US has some nuances. Our Euro price includes 21% VAT. Sellers in the US always list their price without VAT. Our products are shelved in the EU which means import duties have been paid. Also, this product ships for free to most European countries and it will be with you in just a couple of days. Taking all these factors into account we might even be the cheaper option for European buyers. If you need further information on this, please feel free to contact our support team.
@umtbozkr2358 Жыл бұрын
Meest bijzondere woofers die ik bij jullie heb gekocht. En petje af voor jullie klantvriendelijk- c.q. gerichtheid!
@drgreenthumb2339 Жыл бұрын
Yup
@barefaceindian8821 Жыл бұрын
How will this work for 2 X Celestion FTR 3070C 12” 2 X EAW DN20/3003 -8 drivers
@barefaceindian8821 Жыл бұрын
Any reply ?
@WiliamHzhhzhz Жыл бұрын
what is the maximum frequency?
@yardi20005 Жыл бұрын
I have four of these monsters in my home theater
@JBLX92 Жыл бұрын
👍How much is the price, may I know? 🙂
@SoundImportseu Жыл бұрын
This series of Dayton Audio woofers is priced from €199,95 including EU VAT. Please find out more at: www.soundimports.eu/en/?q=odeum
@JBLX92 Жыл бұрын
Nice👍😍
@photohounds Жыл бұрын
Boosting bass to "correct" room suck-outs is garbage. All you'll do is overdrive your (sub)woofer(s) at certain frequencies. ANY cancellation in the room can have infinite power input. The room will still cancel it. It's like putting a band-aid on an axe wound. Treat the room with absorption FIRST (often incorrectly called bass "traps") - look up "acoustic fields" on YT. Dennis knows his stuff.
@BiffTannenBTTF Жыл бұрын
Why am i getting a THD error?
@Benihana81 Жыл бұрын
Change the default from -17db to -20db, that helped me.
@handyfreakshandy4107 Жыл бұрын
Aktuelle android versionen werden nicht mehr unterstützt. Frechheit das es keine updates bekommt
@n0spam911 Жыл бұрын
How many ohms per channel? I have 6x speakers rated 8 ohms each, which would be better?
@Harlizzlee Жыл бұрын
does this act as an active crossover for subwoofer frequencies as well? if the source is a stereo track?
@erginramis99142 жыл бұрын
Dayton Audio B652-AIR 6-1/2" with AMT Tweeter Pair - dimensions in cm???
@SoundImportseu2 жыл бұрын
Hi, the B652-air has the following dimensions: 30 cm hight, 18cm width, 16,4 cm depth. The woofer within the speaker has a diameter of 16,5 cm
@watchingwatches27852 жыл бұрын
That battery board u shoud does not I repeat Does NOT let u charge the batteries
@Tavnott3 жыл бұрын
Can someone please help me.... im trying to find a passive speaker model that I can add this to.... Its 800w rms total (600w rms to woofer and 200w rms to tweeter). Preferably a 12" or 15" floor monitor type. What wattage speaker should o look for to start?
@mthompson9652 жыл бұрын
for a floor monitor, if you space is small use a 12, if it's large use a 15. in terms of wattage, you can go from 250W 8Ω-450W 8Ω, or 300W 4Ω-600w 4Ω.
@mthompson9652 жыл бұрын
i have one of these amps (but it's not from them). it turns out, it's a generic amp that people just buy and slap their name on it and change the color scheme. Blast King uses this amp, as well as Xquisit Audio), same amp with different logos
@BARBELLS-AND-BUDSАй бұрын
Is this amp any good or is it crap@@mthompson965
@jaxonve73073 жыл бұрын
Hi But does the omnimic v2 realy work whit Macbook..?
@TD402dd4 жыл бұрын
Only if you ignore the crap at 3500-40,000 Hz. The fact is you must cross it over at 5000 Hz making probably only useful for a three driver speaker.
@explorinlearnindoing54624 жыл бұрын
And then when crossed at 5k, is it a good tweeter? I mean not as good as the best ribbons like stated in the clip... 🙃
@bluerads5774 жыл бұрын
You should try the fxtreme DB450 DSP amp! it is wayy better then any wondom/dayton boards, and it has literally everything already build in, bluetooth, DSP, 4 channels and even a freakin step up booster! so basically a AIO lol.... i already bought it a few weeks ago and it really is the best amp money can buy
@drakeholdren23834 жыл бұрын
is there anywhere on these boards where i can jump the sin wave audio signal from one board to another...i.e. im trying to power four speakers @ 50w rms so i would need to "parallel" the bluetooth audio signal. is there anyway to do this?
@nicolajkl3 жыл бұрын
Did you ever find a solution? Else you could try to take a look at "SKAA Audio". They make what you seek, but they're expensive. I'm considering adding a pair of their transmitter/reciever pair, for two identical builds im planning. Let me know what you think, or what other solution you might've settled on.
@jagdambsoundsystem94685 жыл бұрын
Price?
@raydog_974 жыл бұрын
$280
@syaz43805 жыл бұрын
This thing is now the main OEM for no-name brand active speakers
@bobkeller83836 жыл бұрын
Is it rms or peak power?
@Informed-User6 жыл бұрын
Do you have a manual that can be down loaded?
@SoundImportseu6 жыл бұрын
Hi Mark, Yes we do, please advise our blog to gain more information regarding connecting the amplifier board here; www.soundimports.eu/en/blogs/blog/9-how-to-connect-the-mean-well-power-supply-to-an/ Also, the spec sheet / manual of these products can be found on the official Dayton Audio website here; www.daytonaudio.com/index.php/home-audio-video/audio-amplifiers/amplifier-boards.html/