Does this work for non turbo cars also? The only marks I have on the flywheel is a triangle an solid line . Do I time the engine with number one at tdc?
@mikelazok Жыл бұрын
Very helpful video. Thank you
@stephaniemorrison13162 жыл бұрын
After setting my timing and installing the tensioner I attempted to rotate the motor through the cycles twice. Right off the bat the chain tried to skip a tooth on the intake cam gear and I stopped and went back now it’s good. Is this normal or could the chain be stretched?
@jameslefevers73312 жыл бұрын
Is this pretty similar to a rzr xp 1000?
@jameslefevers73312 жыл бұрын
Having to put mine back in time at the shop
@james4wd2362 жыл бұрын
I've been working on cars for over 10 years. Doing valve seals on my RZR1k and this timing system is tough. This video was extremely helpful. Thanks!
@jasonwolfe72133 жыл бұрын
Thanks so much .the first 30 seconds more informative than part zilla guru bull. Where they want you to buy there special tool to do this.
@swdiosdiosdado3 жыл бұрын
Thanks for posting this. Extremely helpful.
@hessdeals4 жыл бұрын
Thank You so much for posting!!! My 2015 RZR 1000 was down to 90psi in one cylinder. I ended up doing new pistons and having Head redone. The trick on the intake Cam is awesome!! Thanks again!! Spent hours trying to figure it out til I saw this video. I did exactly what you shown and the timing is dead on!!
@jameslefevers73312 жыл бұрын
So this worked just as well with a xp1000?
@hessdeals2 жыл бұрын
@@jameslefevers7331 Yes.
@IndeewoodsАй бұрын
So why not just put the caps on the cams then put it at tdc,put the cam chain over the exhaust cam sprocket then use a wrench to turn the intake cam to where it needs to be then put the chain on? Your way works as well but the service manual shows to do it the other way. Also you talk about stripped bolts so just torque them to spec. Everything is supposed to be torqued anyway.
@mosesharos4 жыл бұрын
Thanks for posting the video I got a 16 xpt gonna do the 17 cams on it soon