J0D0CAST

Пікірлер

@lisianepiazza4896 8 күн бұрын

Do You have a idea on how can we mod this gun to shot gel balls and with hight capacity, which means whe goin need a way to the piston cylinder to move a little to backwards to alow balls to enter the barrel and then foward again to seal ?

@papilcost 16 күн бұрын

Hi, any way I can get my hands on the powerstock plates files by any chance?

@sherwinjontilano27 2 ай бұрын

Under chassis details pls

@JGDeRuvo 3 ай бұрын

In the kit available for download?

@J0D0CAST 3 ай бұрын

facebook.com/share/p/3kZc6PDk3NtcZog6/

@ginomarjacang526 3 ай бұрын

How

@Benjamite7180 3 ай бұрын

Too bad you didn't sand the nerf and safety letters off

@videoswithbenny 4 ай бұрын

We’re can I get it

@Dougshaw1980 4 ай бұрын

I know i'm asking well after this video posted. But what kind of speaker did you use? Looking to do some of the same mods as you have done.

@ShannonKelly-k1r 6 ай бұрын

Looks like a stg44

@J0D0CAST 6 ай бұрын

kzbin.info/www/bejne/nabdnIKnga5psKcsi=5ZNBo7bilqOpqzZS

@thegammerx5521 6 ай бұрын

Hi @J0D0CAST any news on those files?

@Shadowthehedgehogfan3768 7 ай бұрын

Thats a stg 44

@J0D0CAST 7 ай бұрын

kzbin.info/www/bejne/nabdnIKnga5psKcsi=_lcVU8fNYhyw8lSo

@Shadowthehedgehogfan3768 7 ай бұрын

I WANT THAT

@thegammerx5521 7 ай бұрын

Hello ! Unfortunately I cannot get the official nerf M41-A Pulse Blaster in my country :( . Do you still sell your raw stls in your Etsy store? If so can you share the link to it?

@J0D0CAST 7 ай бұрын

Hey there, I never offered the stls for sale but I might consider that and list them up shortly, cheers

@sonicfa 10 ай бұрын

OMG ❤

@notfeedynotlazy Жыл бұрын

That white LED would benefice from a dab with red or yellow lamp bulb lacquer 🙂 Good work on figuring out that wiring!

@notfeedynotlazy Жыл бұрын

An alternative to trimming the lock is trimming a little piece of the trigger itself. And while one is at it, the whole trigger can be trimmed to leave it screen-accurate 🙂 (as seen on part 4)

@notfeedynotlazy Жыл бұрын

@Ascension-Angel made a video of a simple trigger mod that disengages the rev trigger and the actual trigger, so you can dry- fire it without revving to get the sound if you want.

@J0D0CAST Жыл бұрын

Hey there, I have been selling the kit via etsy but don't have any stock atm.. I will print a kit and let you know when it's available if you like

@CallumHolt-c8l Жыл бұрын

Might be a bit late but is your kit still available for purchase and where can i get it. Thanks

@SlowQQSlow Жыл бұрын

Do you think the electronics can handle a 6.4v lipo?

@laylahingram838 Жыл бұрын

afternoon. update: I've found a spare spring & doubled up, then swapped catch spring for a stronger one, now it's a bonkers blaster

@J0D0CAST Жыл бұрын

www.orangemodworks.com/product_p/css-spg2.htm

@Hexsyn Жыл бұрын

What an entirely strange plunger situation...

@opc-michael-9604 Жыл бұрын

Best centurion tutorial Thank you

@robhodgson478 Жыл бұрын

Awesome video! Glad to know the inner workings of my pulse rifle before I crack into it. What are the specs on the spring you ended up using?

@jaredjohnson5271 Жыл бұрын

What type of screw driver were you using I tried this but there was a screw closest to the orange barrel thing at the front and the screw driver I was using did not work

@Super8Dover Жыл бұрын

And thus, a legend was born

@engelberthkroeger6817 Жыл бұрын

Does it still shoot 94 fps with barrel attached

@TheNooby7155 9 ай бұрын

It shoots 94fps no matter what i think but i see where you're coming from since the dart can like hit the barrel but i don't think he is going to reply to you this guy seems gone from this channel

@ramennoodles1843 Жыл бұрын

This is actually spot on to the real-life Cheytac M200 Intervention, except that the bolt should be behind the gun in front of the stock. Otherwise, great job!

@franco8190 Жыл бұрын

sir, just wanna ask if you might still have that 3d printed file piece on raider stock... been look for some still dnt get luck...

@J0D0CAST Жыл бұрын

Yes I still have available ... will see if I can find it and make item avail on my etsy

@paulclementyonkers4604 Жыл бұрын

Thanks for a great mod guide! I was able to duplicate your mod on my pulse rifle, except for the muzzle flash and mega dart spring upgrade. Also, I made a two-stage trigger by mosfetting the stock flywheel switch and adjusting its location in the grip. I also used a voltage buck to upgrade to a 2S Li-po.

@eedobee 2 жыл бұрын

Looks Shit

@TheGreatGonzales777 2 жыл бұрын

Are you still selling your laser cut body kits? 🙂

@danielrobinson3079 2 жыл бұрын

Now make a smart gun!!! Also if you could have it shoot airsoft and have the sound have it out side wasting targets haha that would be so sick. Oh snap it does shoot wow haha

@zfrenchy1716 2 жыл бұрын

did you remove the little board on the back of the flywheel assembly ?

@zfrenchy1716 2 жыл бұрын

looks like you have an adhesion problem with your printer, try glue stick on the bed.

@paulclementyonkers4604 2 жыл бұрын

I'm thinking about connecting the stock rev switch to a mosfet, then repositioning the stock switch to make a two-stage trigger. This way, the flywheels and pusher are controlled by a single trigger pull. What are your thoughts?

@J0D0CAST 2 жыл бұрын

Would work great for war/play purposes but Not great for display or cosplay as you you want to be able to fire without reving the flywheels

@jayroach3033 2 жыл бұрын

Is the LED timer off counter easily adjustable on the board do you know? For example, if I wanted to extend the display to stay on for longer (no 3 minute auto off) is it possible? Thank you

@J0D0CAST 2 жыл бұрын

I don't believe that is adjustable at all sorry

@archery411 2 жыл бұрын

I'm still unclear on how you removed the support arm. Did you cut it? Unscrew it?

@J0D0CAST 2 жыл бұрын

cut it off with a dremel tool

@archery411 2 жыл бұрын

@@J0D0CAST sweet ty!

@hectorjung9441 2 жыл бұрын

Hi I just got curious, Is the orange rifle barrel loose enough that if you just take off the cap at the front, the barrel will slide out when turned down? I'd just like the third barrel removed without having to cut the gun open

@J0D0CAST 2 жыл бұрын

I'm not sure sorry as I had mine all opened up but I suspect it might

@hectorjung9441 2 жыл бұрын

@@J0D0CASTok, thanks for the response. Seeing from the video though, was the barrel quite loose and came off easy when you opened it up?

@EDGeProjects 2 жыл бұрын

What or where did you source the clear barrel? I was thinking maybe a fish store might have something but yours looks stock

@J0D0CAST 2 жыл бұрын

It's a "worker "product

@EDGeProjects 2 жыл бұрын

@@J0D0CAST Just ordered mine! Thank you for the referral!

@1kokkerrot 2 жыл бұрын

Love all these videos where the ppl say the links down in the description but actually it's nowhere to be seen lol 🤣

@tbip2001 2 жыл бұрын

Any chance of you selling an upgrade kit with all the performance upgrade parts? Motors, wires, switch, wheels , battery pack etc?

@CushionRide 2 жыл бұрын

its a nice build, but for me, those motors are way to loud, i would prefer to have the sound effects more than its ability to throw darts, and if you had some lights for the mussel flash that would have been really cool.

@notfeedynotlazy Жыл бұрын

In the previous vids he shows he HAS a muzzle flash LED, and the motors are disconected from the noise (you can pull the trigger on an empty mag to have the sounds with no rev noise). So you can have cosplay (without darts, which usually is a good idea) or fling foam (with lights and sounds, even if the unavoidable noise of the motors is over them).

@iron9973 2 жыл бұрын

nice one mate

@fallout_boy. 2 жыл бұрын

You are alive?

@J0D0CAST 2 жыл бұрын

yes ... was just laying dormant lol

@mrennny 2 жыл бұрын

Hello. I’m kinda of new to this, so I just had a quick question. If I trim the lock on the rev trigger it’ll still work to rev up the flywheels if I press it, but as long as I don’t have darts in the mag I can just dry fire for the sounds? Thank you!

@J0D0CAST 2 жыл бұрын

Yes you can dry fire with empty mag for sounds and counter only .. or .. when mag Is full use rev trigger then main trigger while holding rev trigger in to fire darts

@mrennny 2 жыл бұрын

@@J0D0CAST ok, great. Thank you for the reply and the videos. They are def helpful. I noticed you had a ring mounted on the front for a sling attachment. Did you just screw that into the plastic or were you able to get a bolt in there?

@J0D0CAST 2 жыл бұрын

@Mrennny yes just screwed in .. its quite robust just there where the screw is

@CycloptycFilms 2 жыл бұрын

Is there anyway to have the counter count down without actually firing? I don't want the gun to fire any darts just have the counter work. I don't care for all the noise the motor makes.

@J0D0CAST 2 жыл бұрын

unfortunately the counter is linked to the pusher mech so pusher needs to cycle but you can have an empty mag and follow my mods so you can run pusher without flywheels running

@CycloptycFilms 2 жыл бұрын

@@J0D0CAST Thank you

@CycloptycFilms 2 жыл бұрын

@@J0D0CAST hello. I was wondering if you can help me. A red wire has come lose from the circuit board the speaker is hooked up to. Might you know where it needs to go? is there a way I can send you a picture?

@OzzyMandias 2 жыл бұрын

With these mods, you got a chance of putting a Xenomorph down...;)

@deformemvita 2 жыл бұрын

I'm currently modding my Pulse Rifle. What size flywheels are you using?

@J0D0CAST 2 жыл бұрын

Worker black wheels

@deformemvita 2 жыл бұрын

@@J0D0CAST I'm working on a half dart mag adaptor for this blaster. I'll put it on thingiverse when I'm done.

Ең жақсы KZbin

Пікірлер