Saved me so much money, thank you

my laptop is not starting now the 1RG inductor is getting heated

Can u make an updated video? i cant do this with my laptop? i dont see the printers i can choose from

Thank you so much 🎉🎉🎉🎉

Great upgrade!

I have one of these playfields for sale on pinside, right now... 8/2/24

Hi mines definitely older more screws those back hinges are a problem😮. Mine has a DVD player.😮The screws are not marked 😮there's a plastic sheet under the key pad😮

Thank you!

Thank you. That helped a lot.

9:30 Deeply grateful for your help getting the power connector off. I'm an Electrical Eng. and I STILL managed to break the locking tabs off the same tyoe of connector on my tablet's battery. The manual shows how to take out every last screw but not a word about these damned things (the speaker connector too)

Nice job man keep it up❤🤙

How to do this wirelessly using ptpip protocol for --capture-tethered

Thanks for the videooo buddy

I did not have an issue getting the 3 screws removed, however, I did have an issue with the connector. When you popped yours out, there appeared to be a base left on the motherboard. This one completely came off. Help please?!

My screw got stripped

Hello I purchased this printer and hard wired an iPad to a laptop and wired the laptop to printer. I’m having an issue to where after one print I’m having to unplug the USB in order to print again. Any advice why it would be doing this?

Hey I need help I can not get fan out

Thank you so much I couldn't find other videos like this. I am gratefull.

This is an animation of the wheels in a Cypress Garden Bingo pinball machine. It is written in python using pygame as the game engine. I added the ability to turn the digits on and off and then I added the bingo card overlay just for visualization of what it would look like in the backbox behind the back glass.

This is an animation of the wheels in a Cypress Garden Bingo pinball machine. It is written in python using pygame as the game engine. I added the ability to turn the digits on and off

This is an animation of the wheels in a Cypress Garden Bingo pinball machine. It is written in python using pygame as the game engine.

thanks a lot. Now it'a perfectly working!

Mike chickened out and we removed the coil from the knocker solenoid, but everything else went into the water for 1 hour.

me trying to figure out how to disconect the fan cable on my laptop: *stressed* me who ends up cleaning the fan without disconnecting the cable: *tired of going back and fourth to get ispopropyl alcohol* me finding out about this video a month later: *shocked and alienated*

Hp 👍

The top screw has a wire that runs right next to it. On my laptop (which I'm pretty sure is the exact same as this one) that wire runs over top of the screw with some tape(?). Can I just pull that tape up to access that screw?

Need more comments!

Are you guys still doing pinball?

are you still around? we miss you.

Very handy! Replacing mine tomorrow, thank you!

Great job !

Is there a better pin ball game anywhere that is more fun and varied as Sonic Spinball? And now it's even ported to PC on Steam.

Hello, thanks for the video.I applied the same steps but i got this error : exec: "cmd": executable file not found in %PATH% Error compiling for board ATtiny412/402/212/202. I would be very happy if you could help. Thanks

Do you like the printing quality and resolution?

Thank you! That connector was a scary thing.

#I found an alternate version that might help with renaming to same name #over and over from time import sleep from datetime import datetime from sh import gphoto2 as gpfrom time import sleep from datetime import datetime from sh import gphoto2 as gp import signal, os, subprocess # Kill the gphoto process that starts # whenever we turn on the camera or # reboot the raspberry pi def killGphoto2Process(): p = subprocess.Popen(['ps', '-A'], stdout=subprocess.PIPE) out, err = p.communicate() # Search for the process we want to kill for line in out.splitlines(): if b'gvfsd-gphoto2' in line: # Kill that process! pid = int(line.split(None,1)[0]) os.kill(pid, signal.SIGKILL) shot_date = datetime.now().strftime("%Y-%m-%d") # This has been written to the while True loop. shot_time = datetime.now().strftime("%Y-%m-%d %H:%M:%S") # This has been written to the while True loop. picID = "PiShots" clearCommand = ["--folder", "/store_00020001/DCIM/100CANON", \ "--delete-all-files", "-R"] triggerCommand = ["--trigger-capture"] downloadCommand = ["--get-all-files"] folder_name = shot_date + picID save_location = "/home/pi/Desktop/gphoto/images/" + folder_name def createSaveFolder(): try: os.makedirs(save_location) except: print("Failed to create new directory.") os.chdir(save_location) def captureImages(): gp(triggerCommand) sleep(3) gp(downloadCommand) gp(clearCommand) def renameFiles(ID): for filename in os.listdir("."): if len(filename) < 13: if filename.endswith(".JPG"): os.rename(filename, (shot_time + ID + ".JPG")) print("Renamed the JPG") elif filename.endswith(".CR2"): os.rename(filename, (shot_time + ID + ".CR2")) print("Renamed the CR2") killGphoto2Process() gp(clearCommand) while True: shot_date = datetime.now().strftime("%Y-%m-%d") shot_time = datetime.now().strftime("%Y-%m-%d %H:%M:%S") createSaveFolder() captureImages() renameFiles(picID) #> import signal, os, subprocess # Kill the gphoto process that starts # whenever we turn on the camera or # reboot the raspberry pi def killGphoto2Process(): p = subprocess.Popen(['ps', '-A'], stdout=subprocess.PIPE) out, err = p.communicate() # Search for the process we want to kill for line in out.splitlines(): if b'gvfsd-gphoto2' in line: # Kill that process! pid = int(line.split(None,1)[0]) os.kill(pid, signal.SIGKILL) shot_date = datetime.now().strftime("%Y-%m-%d") # This has been written to the while True loop. shot_time = datetime.now().strftime("%Y-%m-%d %H:%M:%S") # This has been written to the while True loop. picID = "PiShots" clearCommand = ["--folder", "/store_00020001/DCIM/100CANON", \ "--delete-all-files", "-R"] triggerCommand = ["--trigger-capture"] downloadCommand = ["--get-all-files"] folder_name = shot_date + picID save_location = "/home/pi/Desktop/gphoto/images/" + folder_name def createSaveFolder(): try: os.makedirs(save_location) except: print("Failed to create new directory.") os.chdir(save_location) def captureImages(): gp(triggerCommand) sleep(3) gp(downloadCommand) gp(clearCommand) def renameFiles(ID): for filename in os.listdir("."): if len(filename) < 13: if filename.endswith(".JPG"): os.rename(filename, (shot_time + ID + ".JPG")) print("Renamed the JPG") elif filename.endswith(".CR2"): os.rename(filename, (shot_time + ID + ".CR2")) print("Renamed the CR2") killGphoto2Process() gp(clearCommand) while True: shot_date = datetime.now().strftime("%Y-%m-%d") shot_time = datetime.now().strftime("%Y-%m-%d %H:%M:%S") createSaveFolder() captureImages() renameFiles(picID) #>

Hey Edward ! I just purchased this printer. Where can I get the driver? I’m on the Hiti Website but each time I try to download the driver it won’t let me and idk what to do

How long your new fan last?

ok cool , but how to control the camera remotely ? like to take pictures remotely …the camera is a birdhide 100km from me , yes there is internet too

The 7 digit board is plugged into a 6 digit machine, so the uppermost digit's enable line is left floating, so it is on all the time. That is why it is so much brighter.

It's 2023 and our golf tournament is going on right now. I took all new sign pictures and as promised, I watched this video so I could remember how I did it.

Thank you for this video! We have a similar model laptop and for the life of me, I could not figure out how to undo the connector until you demonstrated it here. Was able to order the part and replace it myself at a fraction of the cost of what I was quoted for a repair. Thank you very much!!!

thanks bud. spent 10 min trying to pull the power out rather than pop up.

hp 15s-fq1003na warning message: system has detected that cooling fan is not working properly Does this mean the cooling fan has to be cleaned or replaced? Also how do I find the correct fan part number because I ve searched online and I still couldn't fine the information? Nihal

Great video, thanks! What was the problem with the original fan? Do you see any improvement? Mine is so noisy, it's worse than any other laptop I had. The fan keeps running at high speed for a long long time. I tried to find a way to turn it off, no success at all. I'm thinking of replacing it.

I just spent the last ouple of hours watching this series and it was fascinating. (Obviously, I didnt watch every minute) I wish I lived next door to you guys and could have worked on this pin from start to finish. So much skill and experience. Thank you so much.

Hola el dongle tiene que ser instalado primero en la pc

I requested that ChatGPT write a CircuitPython running rainbow program for 100 neopixels. The only thing I changed was the pin assignment for the output pin, decreased the number of neopixels to 50 because that's what I had, and commented out the short delay so it would run as fast as it could. Other than that, it's running the code provided by ChatGPT

one thing all of you should do is use constants not magic numbers.

This is a really neat solution. Thanks for sharing your idea. I will, borrow it from you for my outside light project. (A project I started two years ago. Which because I keep learning new stuff will probably never be finished. Thanks again. Ps I found this code via Ralph Bacon’s video.