What kind of person do you call for this work.

Where do get finsh coat (paint)???

After watching this video last year, I followed exactly these instructions and redid the floor of my damaged shower stall floor (and saved thousands of dollars). I'm just reporting in to say that with daily showers, it's holding up fine. Admittedly, I didn't bother to get it nice and smooth (I could have, I should have, and I would have, but I'm impatient and I just called it good enough). I assume the triple expanding foam will eventually break down, but at least I know I can fix it again. Thank you for an absolutely perfect DIY video. This is the best one I've seen.

Who can I pay to do this? A plumber? Who do I call that would know the right way to do this? I don’t want to do it all myself, but I would like it done this way. I bought a house that had a crappy job done and the crack is still there and was poorly fixed.

🦾🦾🦾🦾🦾🦾🦾🦾🦾🦾

In case anyone was wondering about the song... Milavain (Sam Feldt Edit)

I applied too much fiberglass resin and it was too big of a lump /:

Is the spray gun necessary to do this job? That’s the only thing I don’t have that I think will cost a little more than my budget. Someone help thx

In the beginning it says what you need as far as tools and equipment but then later on You're using a sprayer of some sort which is not listed in the tools. Not good. So it comes across something that you can do yourself, but you actually can't because you need specialized equipment.

I tried it and has worked for 4 years

What do you do when the foam makes its way into the drain?

Will this work if shower floor is textured?

How long does a repair like this last? Does the foam compress over time ansd cracks can resume?

How long does it take for the jb weld to dry before you start sanding and applying all the other stuff?

Work at an old hotel. This this a huge issue I’ve had. This is the first no nonsense solution I’ve found. Took it step by step working well. Should be a few more steps before install for these fiberglass shower pans. It’s so common and a pain in in the ass if not caught immediately can cause subfloor damage. Not fun to fix. Especially if time critical. Thank you for this.

At 6:36, what is being sprayed?

A really nice video. I have watched quite a few and this is the best and most thorough.

Probably just buy a new one

Anyone can helping me do this if you did yours you must had all kind things you used right my location is Rowland Height California

I had a long crack that I tried to repair with just the fiberglass cloth and resin because that is all that was shown in a video I looked up a few years ago. I did several coats thinking it would be stronger. It was...and it took about 8 months before my weight finally made the sponginess of the floor pop the repair loose. Now, thanks to your video, I know why. I needed that first step of the triple-expanding foam. Now I know how to fix it right. (But I can't wait until my brother, who shares my Amazon account, sees me ordering a bucket of Bondo. I can hear it now as he gives me a panic phone call: "What the hell did you do to your car??")

What do you paint it with though?

Fabulous, i have this repair coming up, thank you so much for the detailed info, subcriber 👍

Is there a product that can be rolled on instead of spraying? GREAT INFO and video. Thanks

So another question would be leakage from the shower. How long would this fix last as I’m sure the floor underneath will be damaged.

So I need to Mix in a portion of silica sand and steer thoroughly…

My newly built home October last year now has a crack in the shower base. I'm thinking I want a new base and no patch up . Does anybody agree that's fair. TIA

Bondo is made for bare metal that is structurally sound. That’s why it’s made for auto repairs.

You forgot to explain what you were spraying. I had to waste time rewinding the video to find out that it’s an enamel?? But yeah I found it helpful as I perfect my own process. Thank you kindly.

What's under the pan that caused it to get soft? Concrete? Dirt? Wood? My pan just cracked near the drain and I cut out a 2" by 2" section and dirt is below it. Some of the fiberglass has rotted away and now there is a void in that area. Do you think expansion foam will fill the void and be able to withstand the weight of a person? The house has a slab foundation but also has dirt visible in the drain area. I guess they left that part exposed during the concrete pour.

Its cheaper to just replace the tray.

Looks easy but hard at the same time

when using fiberglass and resin overlay you should sand/grind the area to make a depression that equals the thickness of the repair fill. Same procedure as in vid with the mesh and resin. Instead of polyester body filler ( Bondo) use a fiberglass in the can called long and strong. This product is fiberglass chopped up with a gel form of resin and is structural as well as a good final filter. Polyester filler has zero structural, only fills. Mix with catalyst and apply as you would bondo. Now here is the trick. You can use wax paper to cover the repaired area then smooth the repair with a rubber squeegee. This will make the repair very smooth. The wax paper will also help the resin to get very hard and not sticky when sanded. After stripping off the wax paper then wipe down the resin with acetone and the surface will not be sticky at all. Behind sanding as in bid.

This is stupid, insulating foam is NOT for structural support ! Bondo filler is not for water areas. I would put my repair and overlay up against any done like this video any day of the week and guarantee mine to hold up!!! This is the type of work I have to redo.

Sup

Isn't there a concern that spraying too much foam will cause a bulge?

Thanks for this video I repaired my tub by following your instruction.

One important area that they skipped on this video is that you need to drill a hole at the end of every crack before you do your repairs.. this will stop the cracks from continuing.

Does anyone know where is the enamel paint and nonslip surfacer from?

What kind of paint did you use?

Is this a high expansion, expansion foam? Or moderate? I don't want to use the wrong kind.

That " stabilizing foam" is not going to last long before it breaks down.

Thank you for the use full information. I am in Qatar. Where to find this product.is it available on Amazon

I don’t have an air gun to paint with. Can I just use a Krylon paint?

Excellent video

I have a question for ANYONE, I’m using the form just like video and I’m on my 3can and it still not filling or coming out on the Adjacent holes, how many cans of foam did most people use because this may be costly in the video he didn’t specify an amount?

Hi,Please refer to our site for repairs of bathtub www.Van-jacuzii-cabindosh.com

Hi,Please refer to our site for repairs www.Tamirbazsazi.com

what paint did you use

Dude,this is cool

What a palava, saved lots of money though, it only cost $4000, don't tell the wife