Thank you 🙏

Hi @Septix, it's surely coming in the next weeks/months. Just had it in the water since June, made a maiden round in the Baltic, and then moved to Spain. For this year, there's a trip planned all the way back to the Netherlands and then to Lofoten/Norway. So, stay tuned :)

​@@1MrMrMr1 lets go! If you're shorthanded and need a crew I'm willing to pay you to see how she handles. Have my eyes on two 35i's and if all goes well I'll be flying in March to snag one up. If you dont mind me asking, how does she handle sailing upwind? And do you feel the insulation/ injected molding is worth the hype? Will be my first injected/ insulated hull so hoping for no more mold.

​@@Septix It is definitely very quiet inside, and I haven’t seen any mold so far. However, humidity does slightly increase at night. But I do cook in the evening and maybe don’t ventilate. However, I do have water ingress in some areas (side windows, for example, and you should also check the large window). There is also no space under the front and rear berths. You should take that into consideration as well. She sails very nicely and stays very dry upwind (I rarely had water in the cockpit, and I sail without a sprayhood). I’ve just uploaded two videos. kzbin.info/www/bejne/gpSkg5-nrsiUhqs kzbin.info/www/bejne/mYCpf36Pmd6dkMU However, there’s a bit more heeling than I expected. Maybe because of the shoal keel? Though it could also be due to the slightly older sails. :)

​@@1MrMrMr1 I heard similar worries about leaky windows which is making me wonder if I should sail her to the Netherlands to get them sorted there or stay in the UK or go down to Spain for larger refit. Heard Netherlands/ Germany is a great place to get parts for the etaps so fingers crossed.

Hartelijk bedankt! Blijf op mijn kanaal voor meer video's over de Baltische staten, Schotland en Noorwegen. Ik hoop dat ik er in de winter de tijd voor kan vinden.

Hi, 1050 is official empty(!) weight. Some says it’s even without the motor weight. So it will be probably more than that. I think you also must add the weight of the trailer itself?

Hoi Reinoud, in het begin was er helemaal geen wind en later heel weinig, ~5 knopen tegen. Maar ik weet niet of "helaas" of "gelukkig" ;) Door de sterke stroming is het een oncomfortabele plek. en als er veel wind is, zullen hier waarschijnlijk grotere golven ontstaan.

😊

Hi Jānis, thank you. Glad, you like it. It is a 79’ “Delanta 80”. Made by Dehler in their very early years :) 8m LOA, 2,5m width, 1,25 draft. And empty it is only 1.5 tons, so it can be put on trailer.

Hoi Reinoud, bedankt! Ik weet zeker dat je me al hebt gezien, als ik niet in Schotland ben, ben ik bijna elk weekend aan het IJsselmeer (en ik moet natuurlijk eerst Heeg uit :) ). Ik heb mijn genacker tweedehands gekocht, dus niet origineel voor Delanta. Ik denk dat het 45 vierkante meter is (dat is ook wat Delanta nodig heeft), maar ik denk dat het voorlijk iets kleiner zou kunnen zijn. Hij vaart nog steeds erg goed. Als het niet dringend is, zou ik je de metingen sturen als ik terug ben (zeg over twee tot drie weken). Het waait hier te hard om uit te pakken :)

Hello Bent, thank you very much, a very important comment! In fact, I didn't had much time for the cities themselves, mostly just a short walk through the "downtown", sleeping, sailing on :) And I didn't always think about turning on the camera. But something bigger is planned for this year - I'll try to improve myself (also with the comments) 🙂 Best regards to Mors!

Vielen Dank! Die Meilen kommen beim nächsten Mal dazu 👍 und die Karte gab es doch ganz am Anfang?

@@1MrMrMr1 Man könnte dann immer von einem zum anderen Stop anzeigen, wie bei Indianer Jones... Einigen, wie mir sind die konkreten Lokalitäten der einzelnen Häfen kein Begriff. Dann könnte man direkt was dabei lernen! :)

Hi Jan, yes still happy Delanta owner. Didn’t installed anything special, just put a rope around anchor roller ibb.co/Mf4Ndyp not the best solution, but it works well

@@1MrMrMr1 Awesome, I might do the same, can you give me some advice on which Gennaker to use/buy since you have already experience with it? Also, have noticed you are using deadman for mast stepping. I also think about that. Trying to do some improvements on the boat.

Здравствуйте! Двигатель - сорокалетний Farymann L30M, 8 л.с.

@@1MrMrMr1 Спасибо. Присматриваюсь к одной hmsboten.nl/boten/dehler-delanta-80/

Pavel Babitsch Выглядит чистенько, но на мой чуть не похож - странно. Мой L30M, если не ошибаюсь. Насос воды, например и ещё пара деталей

Pavel Babitsch надежная яхта, до 7ки можно ходить m.kzbin.info/www/bejne/b6LCYqqXo9eJoMU :)

Спасибо :) Добавил немного информации. Комментирование - чего?

Сначала. Чуть-чуть. Потом привыкаешь :) Но таки да, со стихией шутки плохи :D

Ну и опять же - вера в корабль :) и капитана ;)

Maria Ivanova приблизительно тут: Besisahar 33600, Nepal goo.gl/maps/zVXiEdRX4pB2 Точнее смогу посмотреть только на выходных...

Отличная кухня ...не настолько, чтобы разгуливать под ним, но не ледяной. Ветер прохладный был, если мне не изменяет память. И сильный - крыши срывало...