❤

Martinez Angela Thomas Sharon White Helen

❤

Not trivial at all. Shoot, I'm using thousandths of an inch. Let's get it right. Thank you for the insight. thank you 🙏

exactly what I was looking for...thank you sir.

When i run the zeroing gcode on my diy grbl cnc, the bit pushes the touch plate a few mm or a fraction of an inch on both X and Y. Z has no such issue. What could be the problem?

عمل جيد شكرا

hi sir it is possible to get the script in metric for mach3?. i cannot found it

Thanks, Charley! Just what I needed.

Outstanding from one old hobbyist to another, THANK YOU all these wippersnappers talk to fast and leave steps out. The Spreadsheet was Gold. I can read and understand that perfectly I plan build one myself. Is this App still about I may go see after this. I have converted muy old Dremel Drill Press to a Mini Mill with manual X and Y Tables but am putting in a CNC Controlled Z axis to better manage and control cutter depth. I am machining old Model Train Chassis to adapt Digital stuff to them. I can do it manual but the Z height on this Dremel Drill Press is not really controllable in a consistent way. Thanks for the help I go it now. Dennis in Virginia Any way you can change that hat. D

Encore un barbichou avec une drôle de casquette à la con qui nous parle dans un patois incompréhensible entrecoupé de ses hoquets. Le KZbin devrait faire attention à ne pas nous balancer de telles diffusions car elles deviennent inutiles puisqu'on n'y bite vraiment que dalle ! Qui plus est, malgré la traduction par écrit, les images sont floues et ne nous apportent rien de clair et précis. Quel navet mes bons !

Orioles weren't ready for them Rangers

Hi Charley I note that the last comment was 5 years ago so I don't know if this site is still active or not. I have never used UGS but it is on my to do list (if I live long enough) and am just about to use some arduino stuff in another project. After that I want to use my 1610 to play around a bit. I just wanted to thank you for a very clear and excellent presentation. I was born before WW2 so living long enough wasn't actually a joke. Thank you Woodie

Calibration not working in mach3 if it's required high speed from the motor

Hi I am running MAch 3 and when I try to auto zero the first thing i get is a message to touch the plate to the bit, and when I do it doesn't register. Do you know why this keeps happening?

Charley, besides your videos being teriffic, do you give one on one lessons for a fee of course.

were softwares used most used popular cnc, linuxcnc this have only mach3 or others.

But after calibration, speed decreased, so now what value should be changed

I can´t thank you enough for this Auto Tool G Code Generator. I´ve been looking for this kind of macro forever, since I don´t know how to write a script myself. Bought it right away and it changed my life. Cheers! Note: Since I use metric units, all I have to do is switch from millimeters to inches before running the script ( assigned to the Auto Tool Button ) on the Settings Tab and after it runs, switch back to millimeters.

Nice Nice show .👏👏👏👏👏👏🤩🙏✨🙋🙉

Thank you! This was exactly what I needed to fill in the things I wasn't understanding about using my Triquetra with Easel! The only thing that I didn't see in the video was needing to press CTRL+A to start the script once in Easel but I found that in another video so putting it here in case it helps someone else.

thank you Charley! That probe (and 2 others so no offense) has been sitting in the toolbox since I bought it months ago as I got tired of trying to get them to work correctly. As a new user to UCCNC itself that was frustrating and daunting enough on it's own so I shelved the probe project until I was more comfortable. Took me all of 5 minutes to get this setup with your video and new software toolbox version and tested thoroughly.. spot on! 53.6600mm = 2.1125 53.6100mm = 2.1106 21.9610mm = .8646

Thanks very much for the spreadsheet and your tutorial.

Can you tell me how to get Goode, easel,and Gus programs. I’m new to this cnc machine. I liked your KZbin show keep it up. 😀😀

help I made a good 3 axis cnc mill/router, it has a mach3 usb interface, i can manually jog it with mach3 software. what free design/drawing program can i use and then convert to gcode for mach3 to run the machine? only want 2.5 axis to cut simple parts cutting or up and not cutting. example a 5cmx5cm square with rounded corners with a 3mm hole in each corner. would ugs be able to send to the mach3 usb interface to opperate the machine?

Hi Thomas, thank you, very very much!

thank you

Thank you Sir really appreciated.

Thank you Mr. Charley Thomas, i learned alot from this video, really appreciated, thanks again Sir.

Do you have a video showing how to zero for a circle piece on the Onefinity?

Great video! Do you have a video showing how you would zero for a circle piece on the Onefinity?

I am a newbie. i made my own machine. I have it up and running. using arduino,grbl.,ugs. Visulizer shows an item key chain that is 40mmx40mm. but machine is reproducing image 20 times larger. re calibrated doesn't help. what am i doing wrong? please help. thanks

Thank you

nice...concise....simple....thanx

Can you use the z probe that came with the xcarve in ugs

Hello, how do we make these settings in the estlcam program? Thank you.

Charley I tried to download the free spreadsheet from you site but there is no place to fill out my info to get the download. Your page may be broken.

How can I get these correction numbers with Easel?

goot

Hi sir i used nema34 stepper motor i am working feed rate slow. please send solution

Thank you so much Charley! I've been trying to figure this out for days, your spread sheet and video is what I needed.

How do I even get ugs up on my screen!!!! I had this running months ago and my software is on the machine but can’t find the executable file!

Mr charley i made this project but when i print any text it print as a mirror image. is there any specific setting I need to change in code?

CarlosCNC App is good for Universal Gcode Sender

CarlosCNC App is good for Universal Gcode Sender

yes very cool ,, thank you..

Is this available now?

Charlie, this may go without saying for most of us, but it should be pointed out that the touch plate needs to be set up so that it is square to the machine. If not, you could be measuring at a diagonal and get an inaccurate reading. Just my 2 cents. Thanks for all your contributions.

hey i just got the onefinity. where is that tool box at. if it just said tool. its not like that. is that something i need to download?

One thing worth mentioning - if you measured your touch plate in inches, and provided the toolbox values in inches, entering your custom bit size in millimeters will result in an incorrect location for x=0, y=0. In my case, I entered 1.5 (1.5mm), and the end result was that the machine tried to use x=-1.5", y=-1.5" relative to the bottom left corner of the workpiece. At first, I though it was simply doubling the touch plate measurements. Then I looked at the code in the zeroing file, and it appeared to be correct. I went back to this step (@4:22), clicked custom, and entered the value in inches for a 1.5mm bit, which is 0.060. Needless to say, it worked. All that to say, if it's giving you the options (on the buttons) in inches, and you enter a custom value, make sure it's also in inches.