Brewdog

Пікірлер

@DaneStCyr 8 күн бұрын

Having trouble removing fuel solenoid on LS tractor model P7010

@sazlg7850 2 ай бұрын

I loved your video you might adjust your name of channel because it is very difficult to locate your channel only beer channel comes up after search.

@The_Brew_Dog 2 ай бұрын

Glad you liked it. My channel name is my nickname since I was just a wee lad, although for well over a decade my channel was “altruistic germs”. I guess I could change it back, but I think I’m harder to find cause I don’t post much. Cheers.

@rothery2 3 ай бұрын

It looked like there was a spinning world on your phone screen. Was this actually ChatGPT? it sounded kind of like Siri.

@The_Brew_Dog 3 ай бұрын

@@rothery2 it was chat gpt, that’s what it does when the voice listening is active. Can’t imagine a reason for me to say it was ChatGPT if it wasn’t.

@rothery2 3 ай бұрын

@@The_Brew_Dog Ok, good to know. As for labeling it something it isn't. People do stuff like that frequently to increase the chance of showing up in a search.

@The_Brew_Dog 3 ай бұрын

@@rothery2 this video has like 10 views and I have like 50 subscribers so it’s safe to say I’m not doing anything for clicks. If I am, certainly not doing it right 😂

@Loulipshitz33 3 ай бұрын

There is one epoxy that is approved by the coast guard for fixes like this. It’s called Belzona 1111. It is not cheap, but it is the only epoxy that approved for hull repairs. The navy uses it too.

@verticle2612 4 ай бұрын

I know what it is. It’s an LS. I have one. Biggest POS ever made. You’ve probably fixed it by now. Let me guess, corroded terminal connect block somewhere? That’s what mine was, then this then that, and back to it’s an LS.

@The_Brew_Dog 4 ай бұрын

@@verticle2612 ya I wouldn’t buy another that’s for sure. The engine and trans are good, those are both solid…electrical is pure gabagé though as many have discovered. When I bought this one I could have got the equivalent Massey for $1k more but I was able to talk the LS dealer into giving me a 9” auger with it so I went with the LS. All of my failures have been safety switches and the hydraulic linkage knuckles, those break regularly. Past that it’s been fine.

@DelcoTrash 4 ай бұрын

Brewdog Im going to eat through your fucking floorboards

@JohnTech725 4 ай бұрын

Expand?

@niluxsan 5 ай бұрын

So what are you rebuilding.Engine or supercharger ?

@The_Brew_Dog 5 ай бұрын

Neither, this ski isn’t worth repairing. In order to fix it not only would both the engine and supercharger have to be rebuilt, it would also require many of the peripheral components (the intercooler for example) to be repaired or replaced. It’s called a “catastrophic failure” for a reason.

@scotthooper4170 5 ай бұрын

Great video. Great tips! Loved the explanation of the plugs. Definitely a problem, & I was not aware of replacement of the tubes.

@dustin9035 5 ай бұрын

Wave runner

@BrandonJones-ji3mk 5 ай бұрын

I'm Working on the same motor with the same intermittent pump issue with a brand new pump. Now I got some things to check tomorrow 👌 I appreciate it.

@The_Brew_Dog 5 ай бұрын

I did this repair last year and as far as I know he hasn’t had any issues since. Good luck.

@savageattacks614 5 ай бұрын

Oil in the drool tubes should not affect performance in any way since it is not entering the cylinder

@The_Brew_Dog 5 ай бұрын

@@savageattacks614 incorrect. It will definitely affect performance, but it won’t present the symptoms I was told this ski has. So if what you mean is it won’t cause cavitation issues then yes, of course. But if you think you can drown the outside of a spark plug in oil without any issues you are sorely mistaken. Mystery solved however, I was told the 2014 ski on the trailer is the one having the issue (which is this one) but it was actually the 2013 sitting next to it.

@thegatheringin1218 5 ай бұрын

thank you, thank you, you saved me a service call

@beerad4748 5 ай бұрын

Thanks I had same issue.

@johnfirebaugh7915 6 ай бұрын

Mercruiser uses the oil pump cut off. Volvo Penta does not. Start circuit powers fuel pump until engine running. When release starter switch, and engine running, ......Alternator powers same Relay socket, and powers the fuel pump at that point, when all is working correctly.

@The_Brew_Dog 5 ай бұрын

Correct.

@joedirt9600 6 ай бұрын

I'm that guy,,,,lol,,,,1988 Sea Ray Sundancer twin 5.7's..

@Peter-do5ht 7 ай бұрын

Great video.. I'm a mercruiser mechanic and just worked on a Volvo fuel pump problem up on Lake Winnepausake in NH. These Volvo Penta fuel pump set ups are quite different than the Mercruisers ( and GM vehicles ).

@MrAirsoft0917 4 ай бұрын

Hi, I’m on lake Winnisquam and I’m having fuel issues I think.. I have a 2001 5.7l gsi that has electric double barrel carb. My issue is that it start and runs just fine at idle and up to 1500 rpms but when I get past that and get up on plane it feels like I’m getting 85% power and when I hold at let’s say 3000rpms it with sound and feel like the engine is pulsating power or getting a burst of power for 1 sec then drop back to that 85% power feel. Hoping someone can help me with this!!

@fightcitygymtalk 7 ай бұрын

Awesome advice! I'm definitely doing that to my boat.

@fightcitygymtalk 7 ай бұрын

Great video, very interesting. Dang, you talked me out of a See Doo.

@Mr.Westery 11 ай бұрын

Hello fantastic explorer! If you're ready to explore unknown lands, you should watch the latest crime documentary video I shared. This video will offer you a fantastic adventure by taking you away from reality!

@a.r.olivas9385 Жыл бұрын

Holy! This confused lonely Bassturd really appreciates this, hope I can find the leak on the ol' Conroy. Thanks for pointing this out.

@The_Brew_Dog Жыл бұрын

Best of luck. As I explained in the video I’ve found cracks in the actual gimbal housing itself more than once and that’s not in salt water conditions. If you’re in salt I’m sure it’s even more likely. Years ago I also found a hole in the U pipe that connects the exhaust system to the gimbal housing on the inside. Had to pull the motor to get to it, was a real bitch to figure out. Filling the boat with water from the inside is the best way to rule things out. In that instance it would take on water while running on the muffs which was a huge clue.

@youraveragedudeonyoutube7258 Жыл бұрын

Checked everything and still nothing. Got a bump starter switch and it won’t do anything. Any ideas

@The_Brew_Dog Жыл бұрын

When you try cranking with the key are you getting 12v + at the starter? If yes then your starter is bad. If no then a bump starter should at the very least crank the starter, if not it’s safe to say you don’t have the bump starter hooked up right.

@joelstanley993 Жыл бұрын

I'm in the same boat hopefully mine is a simple repair also

@ShmooyShmoo Жыл бұрын

I have the same issue. 🤯🤯

@aldenzac Жыл бұрын

Had the same issue, I've gone through a few fuses. Has anyone figured out the cause? Seems like there is a short somewhere.

@The_Brew_Dog Жыл бұрын

These LS tractors seem to have weak electrical systems, specifically the safety switches. Mine is now a 2019 with almost 300 hours and I’ve replace it bypassed almost every safety switch and have also popped several fuses. I haven’t figured out any rhyme or specific reason, although I have had less problems now that I make sure it’s never parked out in the weather and have replaced all of the safety switches at least once.

@ruffrey Жыл бұрын

Question is, why did the fuse blow? Or just a cheap fuse?

@SojournerSwordsman Жыл бұрын

Helped me! Thanks brother!

@The_Brew_Dog Жыл бұрын

Nice!

@markrushfeldt2230 Жыл бұрын

PS The kind of problem demonstrated in this video is most commonly caused by any of a number of bad safety switches.

@markrushfeldt2230 Жыл бұрын

This happened to me a couple months ago. Just when I needed to clear a 15 inch snowfall with my 3 point snowblower, my MT125 wouldn't turn over. After clearing all the snow with a walk-behind snowblower, I fiddled with the tractor until I got it to start so I could drive it to my heated garage to troubleshoot it. I found my neutral safety switch on the hydro pedals had failed. I ordered a new one on-line for $16.00 plus tax and shipping. I bypassed the switch so I could use the tractor until the new one arrived. Once the new switch arrived, I plugged it in and I'm good again. Even though my tractor is still under warranty, there are no LS dealers within 5 hours of me, so it was quicker, easier, and cheaper to just order the part.

@black296tuuk Жыл бұрын

Thanks for this. I just had the same problem at 11 hours so this saved me a bunch of time troubleshooting. 😀

@The_Brew_Dog Жыл бұрын

Glad it helped. 11 hours is pretty ridiculous to be having any issues. These LS tractors obviously have some piss poor electrical systems.

@kevinlord9242 2 жыл бұрын

Have you finally found the issue? If so, what was it? Mine exhibits similar problems when the key is on but it WONT start at all when I bump start it. It just turns over. Any help greatly appreciated