I remember potential tech from 2005, it's you ?

Love your work. I'm currently in the early stages of building similar tech, with some different and additional concepts. Plus you seem like my kind of guy. Might be an opportunity to collaborate with you in the future. keep up the great work. Cheers.

Hi leds are non linear load, you need a resistive load and measure the current and voltage of the out put, at the same time as reading the power feeding the device. Then you know the efficiency

Amazing work keep it up! This reminds me so much of the morin motor (washing machine pump with the keeper plates ) a couple years back i managed to get the morin motor to self run for 5 hours on a heavy load then i disconnected it as its very loud and was getting to late (but did not want to at all ) i seen one of the leads had vibrated loose on the lead acid battery so this thing was running itself the whole time which i recognised beforehand that thats what it wanted to do when i spun it up with a dremal it would spin faster at a curtain resonant point so purposely changed my motor to a weak one to allow the gen to do the work itself.i was never able to self run again but did start self run/charge to a curtain point then start dropping this i beleive is becoz of the lead acid which dont like to work with this type of energy i think youll be better off with supercaps bank or lifepo4 anyways that was 12 years of trying at that point and finally achieved it no matter what anyone says so keep going and NEVER GIVE UP!!!

are you seriously? you wont collect radiant energy without battery! only battery can collect it.

Anybody who went to school know is fake

bruh im from summerland so weird getting local stuff

People often label highly efficient designs as 'free energy,' but no invention rivals the old steam engine, which can be adapted to run on almost anything.

Fake

Is free energy possible? Hell no - this is a click bait channel

Just a scammer.

You are delusional 🙄

❤❤❤😊😊😊😊 please 😢 please 🙏 do a video on exactly how you build this so we can build as well

Thank YOU ;)

Ill make a video to respond to yours.. its too complicated to write you. Ill have it up by the end of this weekend. Thanks for this video! Jp

nice

This is bullshit. You are lying, sir. There is no free energy. The physical universe is governed by laws. They don't change because you failed to get an effective education.

Where is the free energy???

Young man I admire you. There are many people that know that the badini makes excess energy. I read the advanced bedene book and built a two coil motor. Scientist after scientist have been silenced.

Nice work

bs

Do it!

I don't know if it matters but I was told to use ductile iron and barrium farrrite magnets to build a kromrey converter

Awesome I was excited to see this video today no one else is covering the kromrey converter thank you so much for your hard work and dedication 👍

Just found your channel, good on ya mate, insta sub.

smaller wire but many side by side in parallel for more amps aswell as high volts, I'm gonna make a generator soon and i plan to do 150x(0.20mm) strands of wire, to wind I'm just gonna do one layer of wire at a time and each layer as its own strand so at the end i can put them in parallel , 150 strands of that thickness can handle 13amps whether that can be generated is another question but that many is the only way to possibly get plenty of amps

No Change in amperage draw on 2 pole Kromrey with Load

Please Like, Subscribe, Comment! Love you all

So what is the patented lighting system? This doesn’t explain anything about what the title says.

have you experimented with adding different type of gases into the tent, or increase/decrease of gases?

so....how about the output？

plastic Colloidal Nano Silver

Did i miss the part where you tested this thing? As far as the build process youve come a long way. Incorporating the trifilar coil, twisted wire to lower the impedance. If you did give up on the thing, then think about the following. Its not nessecary to have the coils pickup the magnetic field, in fact that would slow things down, its the iron bars that need to do that and the coils generate the energy from the bloch wall of that spinning piece of iron. I also remember john saying something about the holes in the cores, just a hole through the center, to make the already unusual wave, two ups and two downs a little sharper, thus of higher voltage. As for measuring john doesnt use meters, dont know if you noticed... So getting the right combination of load on it should give you better insight. What are your thoughts?

Much more to come on horticulture and energy production. Please loke and subscribe. Thank you all!

Do you want to see the most advanced pulse motor on KZbin? Just search on "MHOP pulse motor." I designed it and the KZbinr TinselKoala built it.

I live in NH and I would love to work with you. I have been making pulse motors and a whole bunch of other experiments. Let me know if you would like to collaborate. Jason

My N-face Bedini motor doesn't work like you described, actually backwards. The magnet moving into the coil induces a voltage which turns ON the transistor AND produces a S-face field which draws the wheel into it. This causes current to build in the main coil. Because the impedance is lower in the main coil vs. the trigger coil, it eventually overrides the trigger coil current, thus turning the transistor OFF (that is back-EMF action). The collapsing field is the same polarity as the N-face, thus pushing the rotor. You can also via another diode, drive another load in parallel. At that point, the given power of the collapsing field gets shared between the loads. John's only claim about "free energy" was in the way that the fast rise-time pulses aid the battery. It charges faster... This is NOT because of FE, it's because the fast pulses lowers the impedance of the battery. This creates a negative resistance relationship between the battery and coil. Given that, it is still, very magical!

Please don't call the collapsing magnetic field "back emf", its not that. your spreading confusion. Back emf opposes your input. When you pulse voltage and current from your primary battery into a coil, a lower voltage is generated in the coil that pushes back on your input current opposing it, this is back emf! NOT the collapsing magnetic field! The differential between your input voltage and the back emf voltage is the effective voltage that's actually doing the work. The collapsing magnetic field is currentless voltage, just as John Bedini says. If your getting current, your not doing it correctly. If your not getting enough back, accelerate the collapse of the magnetic field. How? I will let you figure that out, but beware the output can be huge & easily destroy your components if they are not up to it. I can easily get over 2000v from a 12v solid state single resonant coil system (no transformer action, no trigger coil). I can highly recommend moving to solid state once you've had your aha! moment.

You know to use a non-magnetic drive shaft or you won't get no good results

The question that you have to answer is not easy. What is the average power draw from the running battery? What is the average amount of power being put into the charging battery? How do you make those measurements? Once you can figure that out you are going to be very disappointed. Only about 30% of the power drawn from the main battery makes it into the charging battery. There is no magic when the magnetic field in the coil collapses. That is just a fantasy and you can prove it to yourself if you can figure out how to make the actual measurements.

With common ground you are able to switch batteries and get the system self-running? As far as I understand Mike Clarks motor does exactly this with Mosfets but he has no iron in his motor, he is using air cores and strong neo magnets which are otherwise unsuitable if you have iron cores.

In my view you should better use laminated iron for the core to avoid eddy currents and also use a bigger wire trifilar wound in order to reduce the impedance of the coils.Bedini said it was important to have low impedance coils to get the power out of a Kromrey. The output diodes should also have low impedance and if a full wave bridge doesnt work properly then perhaps try using just one output diode or even several diodes in parallel. Lowering the output impedance could be the key in my view.

All of these badini motors work perfectly they're all missing a nuclear power circuit it's also called a voltage accelerator circuit all it is is a bunch of diodes set up as the same way you do a Tesla valve and you get an inductive Spike pulse curve off of it and you get 100% the amount of power out I dropped a video about it and a dry cell dump you're going to need

Does it cause cold wind?

mind you John Bedini himself explained, in order to calculate the power output of the device, you must include the mechanical energy in the wheel, it's not a lot but it's enough to make the system over 1. thus produce more "energy" then it uses, but it's all different kinds of energy, that's why one single device can never be over 1 COP it takes a "system" so using the highly efficient bedini circuit to turn a low\zero drag generator would produce an enormous amount of "excess energy".

You can charge from 12v to 300v in series, more batteries in series you can get more gain. Spike will flow back to input transistors it can blow it out also

It's True. You can get input voltage to stay the same if you know resonance

whats your email

Hi names Brandon i would like to get in contact with you want to get involved want to work with someone who understands overunity devices and is serious about this technology i can see you really have a drive we want the same thing to get the information out and more importantly inspire others to not be intimidated to get behind this technology and build it so we can all achieve energy independence 👍💯

Why should the little bit of dissolved hydrogen have an effect on plants?