4s 2600mah. in that super light Bush Plane really isn't the best choice. It's a Bush Plane. STOL. I'm running a 3s 2200 and it does all the rolls and loops I really need for a STOL Bush Plane. I have 456 recorded flights on mine at this time. All dirt road landings. I have that 3s 2200 way back. It's been 6 years since you posted this video, so you most likely have this airplane all dialed in by now. Still one of my favorite, go to airplanes. Hope yours is still flying strong.

I can't find a 40 size balsa kit. How did you come by this one?

Nice flying while it lasted. Lasted Time I flew mine i forgot to completely tighten the wing bolts. I just put them in a few turns and went to get a screwdriver and got distracted. I took off and flew erratically up and down until one of the bolts broke and it nosed in. What a mess.

Hello Clarence, wonderful conversion to the electric motor. Could you give me technical information: what motor did you use?, what ESC does it have installed, battery and propeller? Thank you and I congratulate you.

Is that the Durafly/hobby king one,and is that the stock motor,and have you changed the esc,thanks

Such a shame they discontinued this beautiful craft

OUCH.... (;-O

The prop hub is garbage. I have seen 4 fms corsairs crash in the same way. The hub fails and entire front end brakes off.

You may use Adobe Premiere Pro to edit your video

F 86 can be tricky to land for shure! You definatly let her set down way too hard!

Omg I feel for you man!! This is why I won't fly my war birds!! I'd be devastated if this happened to me!😝

Hi Clarence,lam about to buy the 103 ,if you don't mind what motor an esc are you using. It sure flys nice ,you do a great job. Thanks Phil. PS they cost 600dollars now what did you pay?Thanks

Ummm...not cool to bash Freeewing when you basically crashed on landing...

Dude you chunked it in!! And you are blaming freewing!🤨🤭🤣 Yeah if you are going to let it drop from 3-4’ from the ground than yeah you better reinforce the whole wing!🥴

What did you use to get your speed. Looks to be a nice stable wing but I'm not convinced that it was able to break 100mph in this video. Just a little confused.

Nice flying! On your next video can you say...life is like a box of chocolates, you never know whatcha gonna get? =)

What is your setup? Is it the Motion 4075-1390kv w/ a 160esc?

Yeah, man.. this is a gorgeous decent sized ultralight RC. Looks expensive! I hope to see you back making videos, Clarence! You're a great pilot and have some very pretty aircraft. Cheers, Nick

So glad I found this old gem. I've thrown an 64mm freewing EDF on top of my SuperEZ. That plane was in need of a make over :) Cheers and best wishes! Nick

Did you test fly it before you modified it? Mine didn't need any trim at all and goes plenty well enough on the standard set up.

When I watch your videos , my thoughts are what else can go wrong.

Pretty much every time I think "I shouldn't do this." and I do it anyway, something bad happens. Something about this hobby just makes me ignore my gut when I should be listening. I enjoy your videos. Keep up the good work, my friend.

Money wount even fly! The motor is not aligned correctly

This is of course an old video of the Telemetry alarm ... but still valid. Sadly HK no longer sells these - but they can be found at odd times on eBay .. There is a modification that myself and a few others have done - added a BEEPER to the alarm as the vibrator is not enough at times ..... Its easy to do and all thats needed : an ACTIVE beeper that can take voltage of up to 5V .. solder it to the same two contacts the vibrator unit has. You can leave the vibrator still in place and connected .... or remove choice is yours. One of the main problem areas though - they need fully fresh batterys and even with full charge NiMh - its hit or miss if it works. But fresh new Dry Cells and she'll work. Once they get half used - then you start to get intermittent results. Is it any good ... yes I like it and I have two of them ...

Ya gotta own up to that one. Not to be disrespectful but its a foamy...modified at that...That was a terible landing. Glue them in good then fly it into the ground like that your likely have the same result or bent gear

You probably inadvertently installed the carbon fiber spar off center during assembly, thereby causing the off-balance situation. Not uncommon on this model. Steve

is it 6S with stock motor and esc?

Did you use the 6S battery to feed the front light ?

Doesn't look like anybody's at the field but flying over & behind the pits is a no no at any AMA field, 20 ft in front of the flying station's only!

Bummer, I always loved the Little Stick. What size motor was in that thing, it was way faster than any of my old Little Sticks. I use to fly them with a .25 glow engine.

Always check the CG at home and ensure that it is where they say it should be. Never go by what they say online because one foamy Corsair may not have the same CG as another identical foamy Corsair by the same manufacturer.

Who would have though a feather light landing like that would damage the undercarriage

The EDF jet record is not 206 Mph. It’s 241 MPH by a BVM Electra in 2013. Video is on KZbin. kzbin.info/www/bejne/e52reHWiha-Kbas

Nice plane sir, looks really smooth when take off and landing. thanks for sharing 👍

Has this plane held up well and were the wings already built and covered

Years ago I bought at a auction a Jennson Ugly Stick Twin, didn't know they made them until I found the planes rolled up in the fuse. I flew it with 2 Thunder Tiger .36 engines, great fun, my first twin.

I missed getting this model first time it came out. Horizon recently released T28 V2 so I'm in the backorder list. Sounds like you live In Louisiana from the accent. No offense if so because I'm a coonass myself. Nice plane, I fly with Tangi Flyers in Hammond La.

What was all that noise,?

Probably ESC failsafe mode, same with mine in case.

That was so enjoyable that I’m going to go out get that stuff and build one for myself...So nice and easy to see out there for my old eyes.....

Awsome setup looked really good...what exactly setup are you using

This is a total disgrace !!!! I had same problem but only more issues out of box right on the frick'n bench !! Glad for one things went sour on bench ! A $400 EDF what a frick'n disgrace !!!! EDF NOT EVEN SCREWED DOWN , 2 FLAP SERVOS HUMMING & BUCKING RIGHT OUT OF THE *£%#¥]~<_ BOX !!! pISSED OFF !!! I AM FRICKN HOT BOY !!! RETRACT NOT PLUGED IN ON WING SIDE !! I was going to buy the AVios C 130 ..... NOT ANYMORE !!! I have 2 Grand Tundras Love the heck out Em. I feel for you sir .. What a DISGRACE

Have to maiden mine when the weather clears. Looks great in the air🙂🇳🇱

I think it was the noisy servos fault.

Hmmm. Dont think so. Practice flying instead.

Flaps for landing stops the bouncing. Your speed is way lower than. 🙂🇳🇱

Wingspan? Weight?

Awesome!!!!!!!!!

Ouch !!

I know this is an old video but I must say you are a great pilot and that is the quietest EDF I've heard in a long time did you balance the fan? Wish and I listen to fine RC at that time.