Calculated Kinetics

Пікірлер

@thelonewalker9451 4 күн бұрын

Is there a link with all those, didn’t see that

@calculatedkinetics4026 4 күн бұрын

@@thelonewalker9451 to change the selection tap the green box that says style at the link below- www.calculatedkinetics.us/collections/gun-accessories/products/optic-hardware?variant=44062808539430

@MaNiiRaVE 9 күн бұрын

I ordered one, but I am having issues with the screws being too long

@calculatedkinetics4026 9 күн бұрын

@@MaNiiRaVE if you’re using a Holosun use the screws in the blue bag. If you’re using a Trijicon use the screws in the red bag. If it’s not working, please shoot us an email at [email protected]

@Crusader-615 14 күн бұрын

What irons are you running?

@calculatedkinetics4026 14 күн бұрын

@@Crusader-615 it’s the P320 Pro so it comes with Sig #8 sights

@steveg3648 14 күн бұрын

I chose this setup for my P10. The flush fit is great, and the plate does a great job supporting / protecting the optic. Getting the plate for free is a pretty big bonus, too. Thanks!

@MrTmont22 21 күн бұрын

Why the plate so thick?

@calculatedkinetics4026 21 күн бұрын

@@MrTmont22 it’s not, only about .7mm thicker than the OEM plastic one. The sides are machined down so it doesn’t look like an unfinished chunk of metal on there. The EPS plate is the only thick one to allow for perfect co witness with optic ready iron sights from Smith also to bring the plate back away from the loaded chamber indicator.

@MrTmont22 19 күн бұрын

@@calculatedkinetics4026 I like your machining, but could you make a thinner plate? Most people prefer the optic to sit as low as possible to the bore axis. And it'll look better.

@calculatedkinetics4026 19 күн бұрын

@@MrTmont22 we can then we would have to remove the DOGTAG because where it meets the plate would be weak. The DOGTAG specifically for the M&P is extremely helpful in mitigating carbon buildup on the front lens

@SCT43XZPC 25 күн бұрын

will the jagerworks protective cover work with your plate?

@nusdogg 25 күн бұрын

About the EPS Carry? Will the GL-455 sit the same as having the EPS or no?

@calculatedkinetics4026 25 күн бұрын

@@nusdogg yes they will sit almost identical for co witness

@nusdogg 25 күн бұрын

@@calculatedkinetics4026 Thankyou so much. Got your plate already on ordered. But I decided to go with the full size EPS GRN MRS version. Can't wait! You guys rock with your customer service! Definitely won't be my last order from you guys.

@denkdry 26 күн бұрын

Will the 407/507K also work on this plate?

@christopherparker415 Ай бұрын

Thank you

@christopherparker415 Ай бұрын

What sights cowitness with the standard a1 in this setup?

@calculatedkinetics4026 Ай бұрын

@@christopherparker415 anything that is the same height as the as the Beretta APX A1 Tactical. If you search our KZbin videos we have a video of it up as well. I believe Beretta sells those iron sights but you will have to call them directly.

@davidsanbeg2335 Ай бұрын

If you use the MeCanik sight, you don't need to use a plate, and it co-witnesses.

@DallasLasley Ай бұрын

Has anyone else had issues mounting the MO3 to the slide? My screws won’t seat.

@Civilian_Patriot Ай бұрын

That EPS is amazing, I just ordered the red dot 6 moa for my VP9 tactical. That does have an RMR footprint right? Insane how much HK plates are for this thing…$1,000 gun should come with one or something

@calculatedkinetics4026 Ай бұрын

@@Civilian_Patriot it will come with an RMR adapter but it sits on the K Footprint

@DrBongloadZ Ай бұрын

Does this also fit a canik rival and a 507k?

@calculatedkinetics4026 Ай бұрын

@@DrBongloadZ unfortunately not. It is a completely different plate that we will be redoing next month.

@DrBongloadZ Ай бұрын

Does this also fit the Rival?

@ericpryor9483 Ай бұрын

I was trying to install the HS 507-C x2 to my Canik TTI with the included plates, but the screws will not seat properly. The screws seem to be to short because of the screw heads are rounded instead of being concaved resist screws. Am I doing something wrong or do I need a longer?

@calculatedkinetics4026 Ай бұрын

@@ericpryor9483 we have 6-32 x 11.3mm. Little bit longer for better thread engagement. www.calculatedkinetics.us/collections/gun-accessories/products/optic-hardware?variant=48387549135142

@jayy163 Ай бұрын

Do you know any lower 1/3 irons for M&P 2.0 compact carry comp? With the eps dot?

@calculatedkinetics4026 Ай бұрын

@@jayy163 Night Fision Optics Ready Stealth 311-402 with EPS on our DOGTAG. Works with our plate thickness.

@joshandmanuela Ай бұрын

6-32 seems too course to be the correct size for the TTI COMBAT and RMR holes. Several things I have read said it should be M3. Is there a definitive answer as the correct screws to use for the TTI COMBAT with the RMR plate?

@calculatedkinetics4026 Ай бұрын

@@joshandmanuela the TTI Combat RMR is supposed to be 6/32. We contacted century arms and this is what we were told. Previously the Mete on the outer holes (didn’t meet the specs for true RMR footprint) were M3. We have had about 8-10 customers that were having issues getting 6/32 screws in the TTI. Could be a machining error, but the intent was to be 6/32.

@sohnetowing9743 Ай бұрын

Couldn’t be happier with this setup. I made one phone call and got everything I needed. Thanks Tyler

@calculatedkinetics4026 Ай бұрын

@@sohnetowing9743 awesome! Love hearing that! Enjoy

@ryanb33n Ай бұрын

Does the 407c cowitness this well on the tti combat?

@and4077 Ай бұрын

Would also like to know

@calculatedkinetics4026 Ай бұрын

@@ryanb33n unfortunately it will not. We are working with Night Fision for some sights that will work.

@calculatedkinetics4026 Ай бұрын

@@and4077 unfortunately it will not. We are working with Night Fision for some sights that will work.

@miguelnavarro2566 2 ай бұрын

Restock ETA?

@jayy163 2 ай бұрын

Does your Glock eps plate work for a mr920?

@mikeyrodriguez3193 2 ай бұрын

Same screws for scs carry as eps carry?

@calculatedkinetics4026 2 ай бұрын

@@mikeyrodriguez3193 unfortunately not. They have a smaller head

@ricflair8863 2 ай бұрын

Just got the alert that the screws just shipped for the 43X

@calculatedkinetics4026 2 ай бұрын

@@ricflair8863 sorry, we’re running a little behind. Hopefully it wasn’t too long to ship.

@ricflair8863 2 ай бұрын

@@calculatedkinetics4026 appreciate the response. It was a bit frustrating for it to take a couple days to ship, but I totally understand. I’ll be ordering more replacement screws from you soon. Thanks again.

@calculatedkinetics4026 2 ай бұрын

@@ricflair8863 appreciate the patience sir!

@marlboroman71818 2 ай бұрын

Geez, i was really considering buying a optic/plate/screws from yall but I read your return policy and a 20% restocking fee to cover shipping?

@calculatedkinetics4026 2 ай бұрын

@@marlboroman71818 that’s for an optic plate only. We’re not going to charge you 20% if it’s an optic, that’s way too high.

@marlboroman71818 2 ай бұрын

@@calculatedkinetics4026 Thank you for clarifying that

@tacticaldadbod8951 2 ай бұрын

Turned out so good

@calculatedkinetics4026 2 ай бұрын

@@tacticaldadbod8951 thanks brother!

@dylpicklespete Ай бұрын

how long did it take for you to get your plate?

@legionp229saoconvertedme4 2 ай бұрын

You guys are making good shit keep it up im satisfied with mine for the TTI combat

@calculatedkinetics4026 2 ай бұрын

@@legionp229saoconvertedme4 appreciate that brother! The TTI ACRO plate is next…..

@fullarmortrainingllc 2 ай бұрын

Very dope! May have to get an acro p2 now. Love my rmr plate!

@calculatedkinetics4026 2 ай бұрын

@@fullarmortrainingllc the combo is definitely growing on me!

@fullarmortrainingllc 2 ай бұрын

@@calculatedkinetics4026 I got the Steiner mps back when across were hard to find. I have definitely swapped to the mailbox gang

@St.Louis_81 2 ай бұрын

Does the tti work with the 508t without a plate

@calculatedkinetics4026 2 ай бұрын

@@St.Louis_81 technically you could but if you ever bumped the optic, you could knock it off zero as you have 2 flat surfaces and no front and back bumpers to keep it centered. You need the recoil lugs from plate to gun and gun to optic to keep it straight and zeroed.

@St.Louis_81 2 ай бұрын

@calculatedkinetics4026 what optic can I run that I'm able to co witness with

@calculatedkinetics4026 2 ай бұрын

@@St.Louis_81 the EPS is the only option currently with the included sights on the gun. There is some new night fision sights coming out if you want to run the larger optics that will allow co witness.

@St.Louis_81 2 ай бұрын

@@calculatedkinetics4026 thx buddy

@St.Louis_81 2 ай бұрын

@@calculatedkinetics4026 will the 507 comp co witness?

@vicsec7822 2 ай бұрын

Can you help if I purchase the EPS carry for my FN509 Tactical do I choose the dog tag footprint for the base plate?

@calculatedkinetics4026 2 ай бұрын

@@vicsec7822 unfortunately we don’t have a plate for a FN at this time.

@vicsec7822 2 ай бұрын

@@calculatedkinetics4026 Thank you for your reply. If and when you do please give us an update! I’ve invested into my FN509T to be a reliable EDC inside and out. It’s just missing a final piece and I love your plates! I will be purchasing the EPS carry and your plate for my Canik TTi combat! Thanks again!!

@HazardousRob 2 ай бұрын

What threads are supposed to be used to mount a 507comp to the tti combat? The screws that came with mine wont engage the threads of the canik tti combat

@calculatedkinetics4026 2 ай бұрын

@@HazardousRob you need to use 6-32 screws. We have some that are 11.3mm long and provides great engagement. We haven’t experienced any thread issues with the RMR screw holes but have had a handful of customers who have had problems with machining on the slides.

@HazardousRob 2 ай бұрын

@@calculatedkinetics4026 i used the 6-32 screws like you said and they worked great, thank you. I used the m4 screws that came with the Canik because it said to do so and couldnt get any engagement.

@simpleflipR6 2 ай бұрын

@@HazardousRob they’re engineers aren’t so bright they didn’t think. That pistol doesn’t deserve a 500+ buck optic lol

@marlboroman71818 2 ай бұрын

@@HazardousRob the 507comp comes with screws that work perfectly with the canik rmr plate, I know because I just mounted one to mine.

@marlboroman71818 2 ай бұрын

@@simpleflipR6 as I replied preciously the optic manufacturers are responsible for making sure their aftermarket optic is able to mount to a multitude of hosts. In fact in this instance holosun did. They included screws that work perfectly, and even provide a 2nd set of screws that match.

@jordansuarez7556 2 ай бұрын

I was trying to put an olight osight on my tti ?? But seems the screws are to short have u heard any problem with this an if so do yall sell any screws that would fit ?? I have used yall before bought a plate for my elite sc an still use it its great ...thanks for ur time!!

@calculatedkinetics4026 2 ай бұрын

@@jordansuarez7556 it is a problem with that setup. The screws that they use have a custom head. We have some that are close but not the same head angle.

@calculatedkinetics4026 2 ай бұрын

@@jordansuarez7556 and thanks for the order!

@jordansuarez7556 2 ай бұрын

@calculatedkinetics4026 the screws yall have will they work tho?? If so I'll order them?

@calculatedkinetics4026 2 ай бұрын

@@jordansuarez7556 yes! You want 6-32 x 11.3mm under our hardware selection.

@calculatedkinetics4026 2 ай бұрын

@@jordansuarez7556 yes they work! www.calculatedkinetics.us/collections/gun-accessories/products/optic-hardware?variant=48387549135142

@spade1820 2 ай бұрын

will these work with a EPS and the C&H precision plate? ive got some truglo night sights that are way too high

@calculatedkinetics4026 2 ай бұрын

@@spade1820 it will. The CH plate is a little more thinner than ours, but a lot of people that run the plate that comes with the EPS Carry (similar thickness as the CH) like the co witness. Do you know what model of Truglo you have?

@spade1820 2 ай бұрын

@@calculatedkinetics4026 from what i can find, i have the "TG-TG231G2M". They're can height sights so they sit super high in the glass

@spade1820 2 ай бұрын

@@calculatedkinetics4026 from what i can gather i have the “TG231G2M”. They’re suppressor heights so they sit super high in the glass, i’m looking for something that’ll cowitness like that

@spade1820 2 ай бұрын

i’ve got the “TG231G2M”. They are can height sights so they so super high in the glass

@bachaterolion8289 2 ай бұрын

I just spoke with Holosun and they are sending me out the correct screws for my glock 43x mos at no charge...call them and they will fix the situation for you.

@facelessman5362 3 ай бұрын

Just ordered your eps/eps carry plate with the ameriglo 455s torn now between if I should get the carry or the full size eps for my 19. Your videos have been helpful seeing both. I love the flush fit of the eps carry but curious about the loss of window size.

@calculatedkinetics4026 3 ай бұрын

@@facelessman5362 thanks for the order! The flush fit is nice the carry provides, but the window size of the EPS is a little better window to see out of. Really boils down to personal preference as they both can work.

@facelessman5362 3 ай бұрын

@@calculatedkinetics4026 probably gunna flip a coin 🤣

@facelessman5362 2 ай бұрын

@@calculatedkinetics4026 hey just installed my dog tag with an eps carry. There is a TINY sliver of light coming through between the plate and the eps carry towards the front of the plate ZERO gap at all between the plate and my Glock is that to spec? Love the build quality. Torqued both to 15in/lbs

@calculatedkinetics4026 2 ай бұрын

@@facelessman5362 ensure the plate is fully seated by checking along the edge of the plate and making sure it is seated down. Our MOS plates are the snuggest and can get hung up on the little edge on the extractor side on the MOS system. Also since the EPS and EPS Carry have an after center of gravity mounting, it naturally wants to lift the optic up. Placing your thumb on top of the optic while tightening it down will also help prevent any lifting. If it doesn’t fix it, please shoot us an email so we can get you a replacement.

@facelessman5362 2 ай бұрын

@@calculatedkinetics4026 okay will do today thank you 🙏🏾

@Cooldibs 3 ай бұрын

What’s the extra material in front of the optic for?

@calculatedkinetics4026 3 ай бұрын

@@Cooldibs we call it our DOGTAG. It’s a built in deflection table that serves a few functions- deflects and carbon blow back from the gun this is a big problem on the M&Ps. It also can be used to manipulate the slide during single hand operations vs the optic. This is a big selling point for our law enforcement customers as the train this and is very crucial during shield operations. Lastly if the gun is prone to ejecting casings towards the optic or has a malfunction to where it does this it can protect the optic.

@markbroad119 3 ай бұрын

The tactical model has a threaded barrel

@calculatedkinetics4026 3 ай бұрын

@@markbroad119 sure does and suppressor height sights.

@andresmaldonado7356 3 ай бұрын

Do any work with Osight?

@calculatedkinetics4026 3 ай бұрын

@@andresmaldonado7356 yes. Our RMR footprint optics plate will work, you will just have to use the M3 screws that come with the Osight.

@antwanthrasher4859 3 ай бұрын

Thank you needed this!

@LaChimLaCho 3 ай бұрын

What If I shave off the recoil lugs in the rear and .3 off the front ones? Now I’m going off the measurements of the 407k but still the point is to have no adapter plate, do you have shorter screws?

@calculatedkinetics4026 3 ай бұрын

@@LaChimLaCho yes sir. Head to the link below and select “Springfield Armory Hellcat direct mount 407k/507k M4 threads” www.calculatedkinetics.us/collections/gun-accessories/products/optic-hardware?variant=45761944781094

@LaChimLaCho 3 ай бұрын

@@calculatedkinetics4026 and that would work for the Glock 48 with shaved recoil lugs and EPS carry no plate? If so I’m getting for sure, thank you. Would it be the Glock 43x/48 PSA direct mount Eps Carry M4 threads?

@valentinoallala6185 3 ай бұрын

What's the website

@calculatedkinetics4026 3 ай бұрын

@@valentinoallala6185 www.calculatedkinetics.us

@valentinoallala6185 3 ай бұрын

@@calculatedkinetics4026 I tried to order the shorter screws for the EPS Carry for the Glock 43x mos, but your sold out

@takenusername 3 ай бұрын

I am disgusted with the vast footprint standards. This industry should have elected to have two standards, SMALL and LARGE. That’s it. So stupid.

@simpleflipR6 3 ай бұрын

Piece of junk can’t even get the mounting plate right. No 507C, 507K, vortex doesn’t fit on it. Yet manual says it does. I would take any of my SRO off knowing none of your screws work it’s not long enough. Who engineered this junk? CZ p10 competition, sig Icarus, zev hypercomp, zev long pistol, cz shadow 2 are all better choice than this in terms or quality and reliability build.

@calculatedkinetics4026 3 ай бұрын

@@simpleflipR6 you sound frustrated. Shoot us an email so we can help you resolve this. [email protected]

@simpleflipR6 3 ай бұрын

@@calculatedkinetics4026 I sent the trash back already something else is wrong with it. I have other pistols that I can use. My hypercomp and long zev shoots better. The cz s2 and p10 competition is better than this. Slow pistol. Made a mistake of bringing this to shoot along with my scheckmate and erebus 😂

@simpleflipR6 3 ай бұрын

@@calculatedkinetics4026your idea is actually better than Caniks engineers. You need w holes there or any other optic with the plastic lock in the back. Their adapters wouldn’t work on 3 optics. I’ve come across this problem before with CZ and other pieces that’s not easy to get

@simpleflipR6 3 ай бұрын

@@calculatedkinetics4026 Canik confirmed that the 507, 407, vortex optics does not fit because they only have screws provided that doesn’t fit so you have to buy a separate t10 screw and different length t20 just in case. If your gun wiggles it’s because you need rear studs flushed on there or the screws are not long enough. Too long night cause your gun to malfunction. Shadow system also had that problem the screws had to be of perfect length. .02 cents on your video if you sell the footprints. I will grind their adapters down and drill another hole to make it fit lol

@calculatedkinetics4026 3 ай бұрын

@@simpleflipR6 what exact optic (407c, 407k, 507c, 507k, RMR, ETC) and what exact model of gun canik mete or TTI are you trying to run? We may have a plate for that so you don’t have to drill your gun.

@dsnipedu 3 ай бұрын

You guys are sold out of the eps green dot how will this tti look with epscarry version?

@calculatedkinetics4026 3 ай бұрын

@@dsnipedu we actually just got our shipment in and website updated! It pretty much looks the same since the same in terms of co witness since the deck heights are almost identical. It just going to be a little narrower window.

@dsnipedu 3 ай бұрын

Sorry i meant the eps mrs green dot (429.99) still shows sold out when are you getting more of those ?

@calculatedkinetics4026 3 ай бұрын

@@dsnipedu those came in as well. Do me a favor and hit refresh on you browser and let me know if that doesn’t work.

@dsnipedu 3 ай бұрын

All good now !

@Master-xl9ms 3 ай бұрын

Just putting this out there. If you have the Glock 43X/48 MOS, you can contact holosun directly(which is what I did) and they will ship you the correct screws free of charge. So no need to spend extra money on any hardware.

@509ace 2 ай бұрын

You’re a man of the people

@mikeyrodriguez3193 2 ай бұрын

@@Master-xl9ms how long did it take to receive the screws from Holosun?

@Master-xl9ms Ай бұрын

@@mikeyrodriguez3193 not long. i got mine in 3 days

@nate.leal. 28 күн бұрын

@@mikeyrodriguez3193 The website this video mentions is currently nonexistent; and Holosun customer service is inaccessible. So weird that it’s this difficult to find a proper sight for the 43 MOS. Can someone just give me the screw length, so I can order them from Amazon, and have them delivered this afternoon? Sorry not sorry I want to cut out excess middlemen.

@nate.leal. 28 күн бұрын

Would I be better off filing the supplied screws myself?

@kctyphoon 3 ай бұрын

Ordered. Waiting for them come.

@florianwagner5535 3 ай бұрын

I wonder if you can run an optic, and still use the iron sights?? Just in case the red dot does not work - would you still be able to use zhe iron sights while the red dot is attached? Thank you!

@danielbrunner7730 3 ай бұрын

Yes you can definitely co witness depending on the optic you get. I bought the MeCanik MO3 which in my opinion is their attempt at an SRO. I'm barely able to cowitness with it but i don't plan on carrying it ever. I bought the Mete SFT so i put a light on ut and carry that instead! I actually traded in my TP9SF to make room for the TTI but them figured i would never probably even be able to see one in person for at least a year so i ordered the Pro... Then a week and a half later one of my local dealers called me on the way tho work saying they had one and i was first on their list! So within 2.5 weeks i purchased the pro and TTI! LoL oh well right 😂. Also i personally prefer the MO3 over the SRO and you can also find it you had for a half to a this

@florianwagner5535 3 ай бұрын

@@danielbrunner7730 Thanks for the info

@simpleflipR6 3 ай бұрын

Am guessing you’re planning to carry and compete with it. You need the higher sights to do that