Much like theie m16 and 16D

Your video is very good！👍 I have a few questions for you. The spring of the needle is a little weaker,Kinetic energy enhancement, Is that so? Do I need to replace the spring of the needle? Hope to receive your reply.tkank you🙏 @Titus1nine

Quick question does this apply on the snowpeak pp750L? And can i just do the 1st and 2nd step without the 3rd step which is stripping it down? Please advice

Hi, who makes your Red Dot in which model is it? I was thinking of getting the Pinty 2.5-10x40mm Mil-dot Rifle Scope, Red&Green Illumination, Red Laser. Any opinions on this red dot?

Thanks for a great video on this gun in English. 1 thing I did differently with the hammer spring. I noticed my 1st shot after fill wasn't my strongest shot. I was gaining fps as I shot my pressure down. So hammer wasn't opening valve all the way and I had several shims behind the spring. So I needed more mass hitting the valve since spring pressure was maxed. I took my shims out and instead I dropped a 3/8s steel ball in the hammer to shims spring and have more mass hit the valve. I got a pretty big difference after that. If you want more power try that. Thanks again

You can protect the surface from scratches with painters tape, it should come of without glue remains.

Thanks you from France 🎉😊

I've just bought the latest version of the PP750 and the regulator is different. In.177 with parts drilled as per this video the UK version will make about 13ftlb, then detuned back to sub 12ftlb and it performs beautifully. The new version also comes with a moderator adapter already fitted

Very nice

Why there is so many different powerlevels on market with this gun? I know that there is sub 12fpe countries out there, but why these sub 12 guns are marketed in countries with no limits? What can i trust? Vendor where i order mine said in product info that it is 750fps .22 And manual, written in french, say 550fps??? What the heck. So what is the difference between sub12 and no limits gun? What did they do in a factory? So if i have accidently sub12 can i tune it "all out" gun? Confused....

Your reg is black, mine is silver/unfinished. Do you know if there is any difference in the parts or if it is just a colour thing?

Great video. I was interested in the mechanics, as I have the same model. Mine is running at 5.5footpounds, to be safe within UK legal limits. I am considering turning the power down, for indoor use safety and get more shots per fill. Plenty of people are happy with 3 pounds for 10 metres. Ive seen people fit a bigger cylinder, using an off set block. Im interested in a shorter cylinder, to lower the front end weight. I’ve dropped lucky on a very accurate one though so maybe im best leaving it alone. Thanks and shoot safe!

Hi its johan. I whant more shots out like 60 or more shots out of a full cylinder. And whant the pellet hit softer but still shoot at 10meters acurat. I shoot issf at my club so to witch side i turn my vale. I have all so a pp750 .177

This is by far the best assembly video on youtube. Minor false information but ok. We are soon releasing full power kit for this pistol. Should be able to reach 40...50 Joules. Also steel air tube. This should increase it up to 350 bar of fill pressure.

Hello, is the weapon practical and withstands use for years, or is it quick to malfunction and contains industrial problems? Thank you for reading

Felicitaciones es el video más claro y el más completo qué hay en KZbin acerca de cómo potenciar está magnifica arma pistola pp750

Hi, I live in Canada so the pp750 has to be under 500 FPS. I do have a property in the US so i can use the gun there with higher FPS and FPE. My question is if I just cut the hammer spring and adjust the regulator can I dial it back to under 500 FPS when I am in Canada just by turning the hammer spring down?

Hi, I spoke to Wes yesterday airgun archery for fun. He's familiar with your video. My question is once you go beyond 10 FPE and drill it out but you don't want 20 fee because it's too low of a shot count can you bring it down to say European standards which I think are around 14 FPE just by adjusting the hammer spring?

Hi ya ,great video, ive adjusted the regulator as you instructed and turned in the hammer but no difference in speed /power ? Help 😅

That absolutely gorgeous. You are a master craftsman. Although I think a more space filling picture above such a masterpiece would be more fitting

Thats awesome dude! It looks great.

What's the max distance that still gave a good grouping after that 20fpe upgrade?

You're a real man 💪 Thank you genius.

Congratulations on the video, it will help me a lot, a question at minute 07:57, on a piece that you hold in your hand, what diameter did you drill into it? Thanks.

Une vidéo qui rassure et à garder pour si jamais arrive une panne sur ce pcq . Merci 🙏

I'm having issues taking off my front cap to add a moderator

Thanks. What's the shot count with the first adjustment and what's the shot count after the second adjustment with drilling for the 22 caliber?

Once the gun is modified, how many shots are you getting per fill? I guess it must be a lot lower?

Спасибо дружище, очень хорошо понял. Буду пробовать по твоему алгоритму модернизации. Подскажите, на сколько выстрелов хвотает баллона, ну пусть к примеру с 220 атм. , при 20 FPE, до снижения скорости

Anyone had issues with the fps dropping at 250 bar then creeping back up in the range of 200-150 bar?

This was great ! I really appreciate this post !

congratulations! good job!! What 's the best for this pistol? 4.5 or 5.5 for pest control at ~30 meters of distance? How many fpe is the maximum for both calibres out of the box?

Wow. One of the best pcp mod video. Ernest rowe of artemis/snowpeak.

Hello. Did I understand correctly that I have to enlarge three holes? 1.The first one right next to the barrel 6:12 what is the diameter of the drill ?? 2.The second one here is 7:52 drill diameter 5/30 ?? 3.Third Transfer port 11:28 11:58 drill diameter 5/32 ?? What about the breaker spring - does it stay the same? You know how to adjust the trigger Thank you for your help

@titus1nine ...after all these mods sucessfully done and the max power squeezed, what is the shot count & any effect on accuracy?.

Will this mod break anything prematurely?

In terms of accuracy, do you think adding all this power is going to make the gun less accurate at say 50 to 100 yards? Do you think this gun can also handle all this power in terms of reliability and longevity? It probably is going to reduce the lifespan of the gun, but I guess it can be refurbished.

Disappointingly, I saw an owner who had a highly modified Notos with around 750 FPS and it could still not fully penetrate a can of spam. Maybe you should try doing the same test with your PP 750 and see what you’re getting in terms of penetration?

Great video but can you please put those holes sizes in mm ??? Pretty please........

Thanks for the video. This is the best video I’ve seen on modifying the PP750. I decided to put an order in for the PP750. Wes at Air Archery For Fun sells a power block with a regulator on it. Once you do all these modifications that you suggested, is there any advantage to purchasing the power block?

Extremely well-produced video. I learned more from this video than most . Easy to understand all the steps!! WELL DONE!!

Great video mate, well explained. Once you got it up to 20fpe how was the accuracy with the same barrel at 30 yards?

Gracias 🇪🇸🇪🇸

Magkano po

Weird background music

Awesome video info thanks 😊

Is this in Maine/Quebec boarder?

I didn't drill the transfer port i bought it like that

I have the transport enlarged as well. I wish I would have seen your videos when I was trying to figure this out on my own good video

Hey brother i appreciate your videos. I have issues with my avenger. Ain't holding air from the power plenum. I have a rebuild kit from pyramid air. Have you heard of people having same problems