Amazing video! Is it possible to tape the flex cuts to seal the sound as if there we're no flex cuts?

You rock yo i genuinely thought there wouldnt be enough fidelity for us to really tell much. Now ive just discovered i actually wanna go softer im fairly sure, not harder /shrugs <3

]`\

Should I put these switches in my Keychron K14? Or should I get different switches?

Looks exhausting work, good for you. Actually hearing many different configurations may not finally help end users reach to conclusion but instead they get more confused. I'm convinced anyone interested needs to try himself to find out optimal configuration.

The edges of the board flex too much for me, but everything else is pretty good.

QUESTION: I put a 1.5V battery under a sheet of PE foam. My logic was: To take a multi meter measure of a battery wrapped in PE foam. If the multi meter showed something when touching the wrapped battery with the leads - then the foam is conductive. If no measurement - then it is not conductive. Well, took a measure and it showed 1.5V. So my question is: is my method correct and is my PE foam conductive? Thanks!

I'm maybe too late but is the plate that you use is the full alu or the stock leaf alu?

what hotswap sockets do the jwicks use?

Bruh i cant get pe foam from any where wth

I come back to this sound test like once a month. I made some cherry tungstens 6 months ago. Just been saving them for my moment R1 dusk all because of this.

How would you rate the Box Black Ink V2's to the Gateron Oil Kings after lubing? I switched from Gateron Silver Pros to Oil Kings and although i like the sound and feel, i wish it had lower travel like the Silvers but with the heavier weight, ala the Box Black Inks.

Nice vid mate

Nice vid mate

actually hot

How quiet is this board in real life? endgame sound

Sounds amazing! But... What color is this? The faded blue one?

Do I have to solder these?

Really appreciate the nearly apples to apples comparison! I've been going back and forth about my frog tkl with the apollo h PCB and its flexcut. Even with the harder 90A Tadpoles and the non-flex cut alu plate, it still sounded shallow and it lacked the depth that I heard from other Frog TKL Builds. Caved in and bought a Pachi Rev2 PCB with no flex cuts. Hope it actually makes a difference. Cheers!

I hope my Alexa is the very last one to be delivered.

I recently got a new 96% 1800 format keyboard and it came with a silicone mat thats sandwiched between the plate and pcb So typing is more on the muted side with the stock switches (Gateron G pro yellows). I do have Oil kings on the way and should be here soon. I also saw that Stupidfish also haves case and plate foam for the 1800 keebs too, so I might give it a shot.

It’s weird. This hobby for many started because we don’t like mushy feeling keyboards, but now they are having mush as a feature. I’m all for gaskets mounts for better sound of they board is still solid. I don’t get flex pcb at all

Yeah...the flex cuts just make the board sound dull. I just got a Frog TKL myself but I ended up paying extra for the full alu plate since the default one has flex cuts. Didn't realize the same thing applies to PCBs as well so I'm glad the Galatea PCB doesn't have any of those memes.

So I put some PE foam that I sound around the house in the bottom of my case for sound dampening. Do you think it will short my pcb?

i hate progressive spings so much, constantly mistype on them

Love the sound of this board! 👍🏼

the flex cut trend needs to be stopped. Most of the time the flexcuts on pcbs dont align with ones on the plates, so what's the freaking point???

I just put a towel beneath my keyboard and it does the exact same thing lol

man i've been watching this soundtest many times because it sounds pleasant, it's euphonious. i will play this at my funeral so everyone knows your build is great and i love it. my new clacky standard

you should try the drop signature series, my cyber signature sounds like yours almost out of the box(after mods) just missing a good lube

What size of the swagkeys poron case foam did you use?

Damn. First I though you were using candles since in the thumbnail the pe foam was positioned like it lmao. Good job on the video nonetheless

It’s been more then a year and still haven’t got mine😢

0:10 w flexcut 0:21 w flexcut other mic 1:10 no flexcut 1:20 no flexcut other mic

How different is the PC plate from the POM plate?

hey i have the same pcb and I cant for the life of me figer out how to turn on the RGB please let me know what buttons I have to press to do it

How does it sound without any foam? Still waiting for mine to come in

Does the cascade pcb support TX 1.6t stabs or 1.2t?

probably the best looking alice keyboard

what was your best sounding setup in your eyes? and dose the gasket hardness have to do with any of the sound changes at all

you have an alum plate so its not gonna make a huge diffrence with something like pom it deff would be huge its more for flex, which again with an alum plate isnt gonna be huge. i have a utd 356mini alum plate with hyper glide blacks that sounds incredible

yo lemme get those caps i need them bad

personally the only mod I can do to an o-ring board is polyfill everything else illegal to me clack is best

Still waiting for mine 🥲

whats that colorful keycaps on the top

i didnt hear so many diff on lubed ;/

Hi i wanna ask i have fl cmmk mk870 and want to go plateless, but i asked keyboard community in facebook they all said dont use plateless build on hotswap board because it can damage the hotswap socket in the long run. Is it true? Thanks

how to make the switch on plateless hotswap not wobble?

i aim to have a board that sounds as good as yours, holy hell

anyone have any reccomendation on going for 58.5g or 63.5g? Thanks