"Give it a little twist" yeah alright mr Hulk

Not all T5 has that type of key...atleast t5.1 has different type, 7e0837202ad. kzbin.info/www/bejne/jZqkdJ59jJ1nfKMsi=0eHUEFnxpPc860Ed you can see the structure. Atleast I have 2014 model.

Hi wot can I use if I haven't got a air hose

hi, nice video, but not the tapes... if the surface is rough use the green 3m or the ferrari tapes that for me and stroch sunny paper red, spectacular, then on top you can do what you want.... If you haven't bought other nozzles always buy hea but professional ones, the protip, to mount them you will need the tips guard of the professional gun that mounts on the one of the control pro systems with the attachment that should be G. The 250 makes about 1.25 liters per minute, so maximum nozzle x17, with the professional ones you also have the 60 degrees of 15 and 17. with the new tip guard you can also mount the TRADETIP 3 FINEFINISH. If tomorrow you switch to the professional, even of another brand and all standard HEA.

Can you use pioneer head unit with aftermarket cameras? I’ve got one and wired it up same as you but get no signal

How do you remove sod card

That worked for me on my X5. Thanks

I think it is my car's problem now, no water comes out at all, so it is very likely the pipe system blocked not just nozzle blocked, will try this when I return home....

Great video, great info, thank you!

Worked for me using my tyre inflator, see how long it lasts 👍👍

Save the day but not sure how long. Better to remove yourself the pump then clean and drain filter and fluid tank.

I used a bicycle pump and was also flushing out the bottle with a hose and had another hose beside it siphoning out all the cruddy stuff from the bottom of the bottle.

Great I'm installing a nextbase 322 in my T5 today, thanks for an excellent video

No this was amazing borrowed my fathers air gun attached it and placed it on low power as didnt want to damage anything pressed it 3 or 4 times heard the water bubbling. Re attached everything. And wow it was shooting out better than ever. Thanks so much

Great video. I'm actually starting on mine this weekend. I noticed that you didn't use the drywall anchors, did you not need them?

Worked great, thanks!

Did you need to take the passenger seats out in hindsight or couldn’t you do this without?

I bought a lorex 2k wired and whilst testing it I noticed that it got very very warm. I measured the temperature and it peaked at 48.5° centigrade. Wow. Sent it back. Anyone else noticed that?

Great video well done 👍

Any chance you can share where you got the compressor airline

Well it worked, yeah, but you still have the dirt in the sistem, so eventually it will run up and block the hose again.

These doorbells are garbage. They often fail in 16 months or so. The delay for notifications is terrible. Often the weird"Oops" message that you showed. You can take the chip out and just have it connect to your NVR where the video will be saved. That said, I would stay away for these Lorex cameras. Support is awful. Search KZbin universe and you see guys posting about failed AC power supplies. One guy said there is a battery inside that swells causing all kinds of power problems.

Thank you, just what I needed

Great if you have an airline to hand

Any new updates?

G'day SANJ mate, GR8 Video. I just got a panel of these Hexigon lights like your guarage. New Subscriber here Cheers from Western Australia

Minor problem, the only wired up fuse is constant, so moved it up to and it was a 5amp fuse working on ignition, unfortunately I was not able to place the fuse due to the wire above it, anyway being DC current couldn't turn it upside down, thought of searching internet to see if they do a revers wiring, in the end moved the rubber sheath and cracked the plastic support and placed the rubber sheaf back and the jobs a good-un still a little tight fitting but unlikely to rub or short out.

It is ESSENTIAL to put the fuse tap in the correct way round so that the 12V hot side goes to the outside top/new power cable. Put it in the wrong way round and you will have a potentially dangerous setup with incorrect fusing.

I’m wondering if they are screwed onto the ceiling joists or just on to the sheet rock panels If so then I’m assuming that they are very light in weight I’m thinking about including these installations to my garage make over business Thanks for the video Sanj 👍

There are too many good options to Ring without subscription. Ring just raised it to $5/month, $50 annual. I installed the Lorex 2K Battery for my niece and they love it. Many great features. And works flawlessly with Alexa. And no fees, like Ring. Eufy also makes many capable video doorbells with no subscriptions and free chimes / base stations. I have the Eufy Battery 2E (2K HD) with base station (chime, 16GB, WiFi extender). It’s only $75 on Amazon (regular price $150). If you want a more advanced model, the Eufy E340 / S330 offers build in video storage (with or without a base station) and dual cameras with package detection / protection. If you must have a name brand, the Google Nest doorbell is also very good. It includes 3 hours of free video. Plus subscriptions if needed. Like many I started with Ring. But will probably never go back. Note: Currently Eufy only works with 2.4 GHz WiFi. If you only have 5 GHz to work with go with Lorex or Nest.

Someone gave us a Lorex camera before we installed the doorbell. I’m already wondering if I want to bother because the camera is so lame.

Thank you for nice and clear explanation !! 👏👏. Questiion: if I have to spray in the morning and in the evening few days ,, like painting furniture in workshop. it still should be cleaned each time or I could put the gun in buket of water ? Thank you very much

What's the rusty looking lines on zip windows ?

Hey mate, what do you call the connectors that you use to splice into the wire? They are fabulous but I cannot find them online to purchase some for myself

Love the plate

Cheers bud! Thanks

Nice job Sanjay - hope you’re doing well

You should enable the Parking Mode on the dash cam and hook up the fuse tap to the constant live 12v signal this will allow the dashcam to record if any bumps occur while the vehicle is turned off and if the car battery goes below 11.2V the dashcam will stop pulling power

The 9mm facia is ‘capping’ and used with a wooden sub facia, never on it’s own.

10:50 Encrypted.

I used a piece of surgical rubber tubing and blew. Worked like a charm. Thanks.

none of my fuses fit into the fuse connectors now I can’t even install it

Interesting. I think I was quoted just over £6k Obviously, flooring would have to be fitted around the seating and rails. I'm looking for shallow rails. Similar size to your seats so they don't fully reach the other side, but I'm not looking to fold for bed.

Just found this vid, best vid I’ve seen for a reverse camera. Thankyou

worked for me :)

Thank you, you're a life saver! 👌

General tip: Dont forget by Android to give the app full permission and turn of battery optimalistion and enable background use of network. I have Android 14 and have a lot of restrictions

Assuming you wired this into your standard lighting circuit rather than have it plugged in by a 3 pin plug in the end?

Starting our hex lighting project today. Your string idea saved the day! Thanks for sharing the video.

Fairly crap image quality on the pioneer, we have two exact cameras and my mate has a chinese android unit and his quality is far superior, I had to cut a cable and use a different standard signal otherwise no image at all