I desperately want one of these for a Honda pioneer 1000 but it won't work. Can we please make more stuff for honda

Tried assembling as a 48' but the bracket wouldn't fit so had to switch to the 60', that worked , would've preferred it smaller though.. haven't hooked it up to the quad yet, so job only half done😒

Do you have a video with mounting a cfmoto uforce side by side with this snow plow kit?

Great instructional video. But assemble it up on a bench or table. Easier on the knees and backs of us old fat guys. Work smart not hard!!

Too bad doesn't work with stock ranger doors

Update: Since my below post I also bought & installed rubber flap (for top of blade), corner marker posts and 1 x side universal wing (made it fit) and 2" PVC pipe on its cutter blade (to protect my gravel driveway). I also bought / installed a Snatch Block with 2" wheel (can also use 2.5" wheel version) - for its hoist cable. These optional upgrades are worth it as well....

Update: Since my below post I also bought & installed rubber flap (for top of blade), corner marker posts and 1 x side universal side wing (made it fit) and 2" PVC pipe on its cutter blade (to protect my gravel driveway). I also bought / installed a Snatch Block with 2" wheel (can also use 2.5" wheel version) - for its hoist steel cable. These upgrades are worth it as well....

I bought / installed the same Kolpin 48-60 universal plow on my ATV 2011 Arctic Cat 550 TRV (2-Up). Instructions stated 45-60 minutes to assemble the blade. I started at 8:30 AM, had 1.5 hour lunch and completed at 2:30 PM. Yes. That long - with a large cup of coffee and my reading glasses. Retired people with bad knees/hips take longer time. smiles. For my ATV's under belly, I used 4 x U-Bolts and 2x2 hard wood spacers. And I cut off the tips of extra long U-Bolt threads as well. During its install I did add a few more flat washers and greased its swivel points. All installed "as it should" and very happy with its looks, with its ease of angle change and with its safety tilt ability. It's worth buying "on sale". Recommend this adjustable plow...

I bought / installed the same Kolpin 48-60 universal plow on my ATV 2011 Arctic Cat 550 TRV (2-Up). Instructions stated 45-60 minutes to assemble the blade. I started at 8:30 AM, had 1.5 hour lunch and completed at 2:30 PM. Yes. That long - with a large cup of coffee and my reading glasses. Retired people with bad knees/hips take longer time. smiles. For my ATV's under belly, I used 4 x U-Bolts and 2x2 hard wood spacers. And I cut off the tips of extra long U-Bolt threads as well. During its install I did add a few more flat washers and greased its swivel points. All installed "as it should" and very happy with its looks, with its ease of angle change and with its safety tilt ability. It's worth buying "on sale". Recommend this adjustable plow...

Installed this 8:58 blade on my 420 honda when a move blade from side to side half inch from front tires am I mounting the mounting bracket wrong winch cable interferes with swing handle

I bought / installed the same Kolpin 48-60 universal plow on my ATV 2011 Arctic Cat 550 TRV (2-Up). Instructions stated 45-60 minutes to assemble the blade. I started at 8:30 AM, had 1.5 hour lunch and completed at 2:30 PM. Yes. That long - with a large cup of coffee and my reading glasses. Retired people with bad knees/hips take longer time. smiles. For my ATV's under belly, I used 4 x U-Bolts and 2x2 hard wood spacers. And I cut off the tips of extra long U-Bolt threads as well. During its install I did add a few more flat washers and greased its swivel points. All installed "as it should" and very happy with its looks, with its ease of angle change and with its safety tilt ability. It's worth buying "on sale". Recommend this adjustable plow...

Can we go ahead and stop saying go ahead?

Great video... but "go ahead" could have been edited out maybe 20 times or more.

The gas strut on the right side is up side down. There's a small amount of oil in the strut that lubricates the seal. When extended, the piston end should be down for maximum life.

Unless the sound is measured under trail operation at trail speeds with and without this doesn't show me much. As someone else stated a dynamic test is called for definitely!

I know this video is old but where do you get the replacement rubber bushing?

Very easy to follow concise instructions, with no BS. Great job Sir, thank you.

Mine didn't come with the mounting plate for the atv

Love to see this put together as a 48” unit

Those push tubes need to be about 6” longer I have a Honda 520 and the plow is two close to the front of the bike

Why dont you make one for the midsize Ranger?

What a terrible terrible product so to instructions. Stop buying crap from china with poor instructions.

This guy here saving us all some BS hahah thanks guy

Can you install the atv one on a polaris rzr trail premium 2023?

What is the steel strap with the 6 holes in it for...I don't see it anywhere in your video

Glad i found this before trying the instructions 😂 instructions are only good for checking which bolts to use besides that this guy is way more easy to follow. Still took me like 2hrs start to finish lol

You were doing great until you left out the information everyone is looking for concerning the mount to the atv. Ffs!!!

I got the UTV switchblade it’s the same but adjustable 60” up to 74” . This year I’ve put it on my 2023 Honda pioneer 520 as a 60” setup without the push tube extensions. Last year I used it on a parking lot on an s10 Jimmy as 74” with the push tube extensions .

For Kawasaki Teryx...the square ubolts...need about 1/2" extra clearance on the slots right where the plow arms would come up. The only one shown in the manual is for the mule. You guys have the clearance on the inside gap where the arms would come up...but if you guys would cut those slots a little longer open...then boom. As it stands...tomorrow will involve so drilling. :/

Recently bought one of these plows good quality product but everything was labeled wrong number wise had to put it together without directions Customer service does not respond to emails Good product bad attention to detail at manufacturing

I am trying to put the plow blade hinge pivot plate between the vertical supports and it does not fit. No idea what I have wrong. Any ideas?

this silver plate is backwards to my strm chsr, 2016s also need 2 spacers on left, manual sucks, this vid skis steps cmon.....

I don't even like mounting IKEA furniture. Can you imagine?

Yo lo compre muy bueno todo pero lo intale con 2 piesas de aluminios por dentro y 4 tornillos de 3/8 que perfora la parrilla y quedo como una roca con lo que traia para aguantarlo me parecía muy devil Gracias por el videos 👍👍👍

omg why didnt u sho0w the mount??

u didnt show mounting the mount?

Worst instructions ever, none of the part numbers matched up

To bad this doesn't come with a front mount system and a power angle.

😂😂😂😂😂😂😂😂

Nice I am purchasing one

Wonder how heavy it makes dropping the tailgate loader...

Me too!

Do you have a rack for a 2020 kawasaki teryx?

the video is as useless as your mounting instructions

It's Fairlead not Fairlane

Everybody keeps joking at me for getting one because we don't get much snow where I live I tell them it can be used for other stuff

Less than impressed with mine which I have on a cf moto z force 500.u bolts won't stay tight and break easily.mount moves forward and back.cant find replacement u bolts anywhere

Doo doo

Hurt fretter run to rrtr

Will this fit a 1999 honda 300 fourtrax